LCDX2-56DF-E Equivalent & Substitute Parts

Part Overview

The LCDX2-56DF-E is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2 AWG wire termination with a 5/16 stud configuration. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and support ongoing applications. The terminal features non-insulated construction with electro-tin contact finish and copper contact material, suitable for crimp barrel termination applications.

Substiute Parts

LCDX2-56DF-E

Panduit CorpIn Stock: 1127LCDX2-56DF-E Datasheet

Current PartRFQ

LCCX2-38D-E

Panduit CorpIn Stock: 1112LCCX2-38D-E Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCDX2-56DF-E is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Wire Gauge: 2 AWG
• Terminal Type: Rectangular Tongue
• Terminal Style: Two Stud Holes
• Tab Thickness: 0.110" (2.79mm)
• Termination Method: Crimp, Barrel
• Contact Material: Copper
• Contact Finish: Electro-Tin
• Insulation: Non-Insulated
• Series: Pan-Lug™

Variable Parameter (Substitution Basis):

• Stud/Tab Size: The primary differentiator between the main part and substitute parts. The LCDX2-56DF-E features a 5/16 stud, while the substitute LCCX2-38D-E features a 3/8 stud. This variation accommodates different mounting hole configurations while maintaining all other electrical and mechanical characteristics.

The substitute part LCCX2-38D-E maintains full compatibility across all critical parameters except stud size, making it suitable for applications requiring 3/8 stud mounting.

Parameter Comparison

Engineering Selection Recommendations

For LCDX2-56DF-E Applications:

The LCCX2-38D-E serves as the active equivalent substitute. Selection of this substitute is appropriate when the mounting hole configuration accommodates a 3/8 stud diameter. Both parts maintain identical electrical performance characteristics, barrel dimensions, and contact properties.

Compliance Considerations:

Both the main part and substitute are ROHS3 compliant and REACH unaffected, ensuring regulatory alignment for current manufacturing standards. The substitute part maintains active product status, providing assured long-term availability compared to the obsolete main part.

Inventory Status:

The LCCX2-38D-E is currently in active production with 1,063 pieces available in bulk packaging, supporting immediate procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can the LCCX2-38D-E directly replace the LCDX2-56DF-E in all applications?

A: The LCCX2-38D-E is compatible with applications where the mounting hole diameter is 3/8 inch. The primary difference is the stud size; all other electrical and mechanical characteristics remain identical. Verify mounting hole specifications before substitution.

Q: What is the primary difference between these two parts?

A: The stud/tab size differs: LCDX2-56DF-E features a 5/16 stud, while LCCX2-38D-E features a 3/8 stud. All other parameters, including wire gauge, termination method, contact material, and finish, are identical.

Q: Are both parts compliant with current regulatory standards?

A: Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing.

Q: What is the wire gauge capacity for both parts?

A: Both the LCDX2-56DF-E and LCCX2-38D-E are rated for 2 AWG wire termination.

Q: Why is the main part listed as obsolete?

A: The LCDX2-56DF-E is classified as obsolete. The LCCX2-38D-E maintains active product status and serves as the current production equivalent within the Pan-Lug™ series.

Q: What termination method is used for these terminals?

A: Both parts utilize crimp barrel termination, requiring appropriate crimping tools and dies for proper installation.

Q: Are these terminals insulated?

A: No, both the LCDX2-56DF-E and LCCX2-38D-E are non-insulated terminals.