LCDX2/0-38DF-X Equivalent & Substitute Parts

Part Overview

The LCDX2/0-38DF-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire applications with a 3/8 stud connection. This component is classified as obsolete, indicating it is no longer in active production. The terminal features a non-insulated copper construction with electro-tin contact finish, suitable for crimp barrel termination in free-hanging, right-angle mounting configurations.

Due to its obsolete status, identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for repair, maintenance, and new production applications.

Substiute Parts

LCDX2/0-38DF-X

Panduit CorpIn Stock: 800LCDX2/0-38DF-X Datasheet

Current PartRFQ

LCDX2/0-38D-X

Panduit CorpIn Stock: 1107LCDX2/0-38D-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCDX2/0-38DF-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate 2/0 AWG wire, as this determines the barrel diameter and crimp interface geometry.

Stud/Tab Size Equivalence: The 3/8 stud dimension is a fixed mechanical interface requirement that cannot be altered without redesigning the mounting structure.

Terminal Type and Style: The rectangular tongue configuration with two stud holes defines the electrical and mechanical connection topology and must remain consistent.

Termination Method: Crimp barrel termination specifies the wire attachment mechanism and is not interchangeable with other termination types.

Dimensional Specifications: Barrel ID (0.510"), Barrel OD (0.640"), and Ring ID (0.410") establish the physical interface and must match exactly.

Material and Finish: Copper contact material with electro-tin finish ensures electrical conductivity and corrosion resistance properties.

Regulatory Compliance: ROHS3 compliance and REACH unaffected status must be maintained for applications subject to these regulations.

The LCDX2/0-38D-X meets all these criteria and is identified as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The LCDX2/0-38D-X is the direct substitute for the obsolete LCDX2/0-38DF-X. Both components are manufactured by Panduit Corp within the Pan-Lug™ series and maintain identical electrical and mechanical specifications across all critical parameters.

Product Status Consideration: The LCDX2/0-38D-X holds active product status, ensuring ongoing availability and manufacturer support. The LCDX2/0-38DF-X is obsolete and subject to discontinuation of supply.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for applications in regulated industries.

Dimensional and Electrical Equivalence: All functional parameters—wire gauge, stud size, barrel dimensions, contact material, and finish—are identical between the two parts, ensuring direct functional interchangeability.

Packaging Difference: The substitute part is supplied in bulk packaging, whereas the main part packaging specification is not provided. This distinction affects procurement and inventory management but does not impact electrical or mechanical performance.

Availability: The substitute part maintains higher inventory levels (1002 units versus 751 units), supporting consistent supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the LCDX2/0-38D-X be used as a direct replacement for the LCDX2/0-38DF-X?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters, including wire gauge, stud size, barrel dimensions, contact material, and finish. The substitute part is suitable for direct substitution in applications currently using the obsolete part.

Q: What is the primary difference between these two parts?

A: The LCDX2/0-38DF-X is obsolete, while the LCDX2/0-38D-X is active. The substitute part also specifies bulk packaging, whereas the main part packaging is not documented. The mounting type specification differs slightly (the main part lists "Free Hanging (In-Line), Right Angle" while the substitute lists "Free Hanging (In-Line)"), but all electrical and mechanical dimensions remain identical.

Q: Are there any compliance or certification differences?

A: No. Both parts maintain identical ROHS3 compliance and REACH unaffected status. Regulatory requirements are satisfied equally by both components.

Q: Does the bulk packaging of the substitute part affect its performance?

A: No. Packaging type does not influence electrical or mechanical performance. Bulk packaging affects procurement quantity and handling procedures but not component functionality or compatibility.

Q: What wire gauge does this terminal accommodate?

A: Both the main part and substitute accommodate 2/0 AWG wire. This specification is fixed and cannot be altered without selecting a different terminal model.

Q: Is the 3/8 stud size a critical parameter for substitution?

A: Yes. The 3/8 stud size is a fixed mechanical interface dimension. Any substitute part must maintain this exact stud size to ensure compatibility with the mounting structure and electrical connection points.

Q: Can these terminals be used in insulated applications?

A: No. Both the main part and substitute are non-insulated terminals. For insulated applications, a different terminal model must be selected.

Q: What is the termination method for these terminals?

A: Both parts use crimp barrel termination. The wire is inserted into the barrel and crimped to establish the electrical connection. This method is not interchangeable with other termination types such as solder or screw terminals.