LCDX2/0-12D-X Equivalent & Substitute Parts

Part Overview

The LCDX2/0-12D-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire applications with a 1/2 inch stud connection. This non-insulated copper terminal features electro-tin contact finish and crimp barrel termination. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCDX2/0-12D-X

Panduit CorpIn Stock: 841LCDX2/0-12D-X Datasheet

Current PartRFQ

LCCX2/0-12-X

Panduit CorpIn Stock: 1058LCCX2/0-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCDX2/0-12D-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: Both the main part and substitute must accommodate 2/0 AWG wire, as this determines the barrel diameter and crimp force requirements.

Stud/Tab Size: The 1/2 inch stud connection is a fixed mechanical interface requirement. Substitutes must maintain this dimension for bolt-down compatibility.

Terminal Type and Style: Rectangular tongue configuration with two stud holes must be preserved to ensure mechanical fit within the assembly.

Electrical Properties: Contact material (copper), contact finish (electro-tin), and barrel dimensions (ID 0.510", OD 0.640", Ring ID 0.530") must remain constant to maintain electrical performance and current-carrying capacity.

Termination Method: Crimp barrel termination is the specified joining method and cannot be altered.

Regulatory Compliance: ROHS3 compliance and REACH unaffected status must be maintained.

The LCCX2/0-12-X substitute part meets all these criteria while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The LCCX2/0-12-X is a direct functional substitute for the LCDX2/0-12D-X based on electrical and mechanical parameter equivalence. All critical specifications—wire gauge, stud size, barrel dimensions, contact material, and contact finish—are identical between the two parts.

The primary distinction is overall length: the LCCX2/0-12-X measures 4.870" (123.70mm) compared to the LCDX2/0-12D-X at 3.270" (83.06mm). This dimensional difference must be evaluated against the specific application requirements. If the assembly space accommodates the longer terminal, the LCCX2/0-12-X provides superior availability as an active product with ROHS3 compliance and REACH unaffected status.

The LCCX2/0-12-X is supplied in bulk packaging, whereas the original part packaging specification is not provided. Procurement requirements should account for this packaging difference.

Frequently Asked Questions (FAQ)

Q: Can the LCCX2/0-12-X replace the LCDX2/0-12D-X in all applications?

A: The LCCX2/0-12-X is electrically and mechanically equivalent for all critical parameters. However, the increased overall length (4.870" versus 3.270") must be accommodated within the assembly space. Applications with spatial constraints may require design modification or alternative solutions.

Q: What is the significance of the length difference between these parts?

A: The overall length difference of 1.600" (40.64mm) affects physical fit within the assembly. The longer LCCX2/0-12-X may require clearance verification in confined spaces. The functional electrical and mechanical properties remain identical.

Q: Are the barrel and ring dimensions identical between these parts?

A: Yes. Both parts feature identical barrel ID (0.510"), barrel OD (0.640"), and ring ID (0.530"). These dimensions determine wire gauge compatibility and electrical performance, which are fully equivalent.

Q: Why is the LCDX2/0-12D-X classified as obsolete?

A: Product obsolescence is determined by the manufacturer. The LCCX2/0-12-X is the active equivalent offering continued supply and support.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

Q: What is the difference between the packaging specifications?

A: The LCDX2/0-12D-X packaging is not specified in available documentation. The LCCX2/0-12-X is supplied in bulk packaging. Procurement should confirm packaging requirements for the intended application.

Q: Can the crimp barrel dimensions accommodate 2/0 AWG wire in both parts?

A: Yes. Both parts feature identical barrel dimensions (ID 0.510", OD 0.640") designed for 2/0 AWG wire termination using standard crimp tooling.

Q: Is the contact finish (electro-tin) identical between both parts?

A: Yes. Both parts feature electro-tin contact finish on copper base material, providing equivalent electrical conductivity and corrosion resistance.