LCDX1/0-12D-X Equivalent & Substitute Parts

Part Overview

The LCDX1/0-12D-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1/0 AWG wire gauge applications with a 1/2 stud connection. This non-insulated copper terminal features electro-tin contact finish and is rated for crimp barrel termination. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCDX1/0-12D-X

Panduit CorpIn Stock: 794LCDX1/0-12D-X Datasheet

Current PartRFQ

LCDX1/0-12-X

Panduit CorpIn Stock: 779LCDX1/0-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCDX1/0-12D-X is based on electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Parameters:

• Wire gauge (1/0 AWG)
• Barrel inner diameter (0.450")
• Barrel outer diameter (0.580")
• Ring inner diameter (0.530")
• Contact material (Copper)
• Contact finish (Electro-Tin)
• Termination method (Crimp, Barrel)

Mechanical Compatibility Parameters:

• Stud/tab size (1/2 Stud)
• Terminal type (Rectangular Tongue)
• Terminal style (Two Stud Holes)
• Tab thickness (0.130")
• Width - outer edges (0.850")
• Mounting type (Free Hanging In-Line)
• Insulation type (Non-Insulated)

Regulatory Compliance Parameters:

• RoHS3 Compliance
• REACH Unaffected status
• ECCN classification (EAR99)

The substitute part LCDX1/0-12-X maintains all critical electrical and mechanical parameters required for functional equivalence. The primary difference is overall length, which does not affect terminal performance in standard applications.

Parameter Comparison

Engineering Selection Recommendations

The LCDX1/0-12-X serves as the direct functional equivalent to the obsolete LCDX1/0-12D-X. Selection of the substitute part is supported by the following factors:

Product Status: The LCDX1/0-12-X maintains active product status, ensuring continued availability and manufacturing support. The original LCDX1/0-12D-X is classified as obsolete and subject to discontinuation.

Regulatory Compliance: Both parts maintain identical ROHS3 compliance, REACH unaffected status, and EAR99 ECCN classification, confirming regulatory equivalence for all jurisdictions.

Electrical and Mechanical Specifications: All critical parameters determining terminal performance—wire gauge, stud size, barrel dimensions, contact material, and contact finish—are identical between the main part and substitute.

Packaging Consideration: The substitute part is supplied in bulk packaging, whereas the original part packaging specification is not provided. Bulk packaging is standard for terminal connectors and does not affect terminal performance or installation.

Length Variance: The substitute part features an overall length of 4.040" compared to the main part's 3.130". This dimensional difference does not affect electrical performance or mechanical compatibility with standard 1/2 stud applications and does not impact the terminal's functional capability in typical installation scenarios.

Frequently Asked Questions (FAQ)

Q: What makes LCDX1/0-12-X electrically equivalent to LCDX1/0-12D-X?

A: Both terminals are designed for 1/0 AWG wire gauge with identical barrel dimensions (0.450" ID, 0.580" OD), ring dimensions (0.530" ID), contact material (copper), contact finish (electro-tin), and termination method (crimp barrel). These parameters determine electrical performance and current-carrying capacity.

Q: Does the length difference between the two parts affect compatibility?

A: No. The LCDX1/0-12-X has an overall length of 4.040" compared to 3.130" for the LCDX1/0-12D-X. This difference does not affect electrical performance, mechanical fit to 1/2 studs, or standard installation requirements.

Q: Are both parts RoHS compliant?

A: Yes. Both LCDX1/0-12D-X and LCDX1/0-12-X are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: Why is the original part listed as obsolete?

A: The LCDX1/0-12D-X is classified as obsolete by the manufacturer. The LCDX1/0-12-X is the active equivalent product and is the recommended selection for new applications and replacement inventory.

Q: What is the difference in packaging between these parts?

A: The original part packaging specification is not provided. The substitute part LCDX1/0-12-X is supplied in bulk packaging, which is standard for terminal connectors and does not affect terminal performance or installation.

Q: Can LCDX1/0-12-X be used as a direct replacement in existing applications?

A: Yes. The LCDX1/0-12-X maintains all critical electrical and mechanical specifications required for 1/0 AWG, 1/2 stud rectangular tongue terminal applications. The increased overall length does not prevent installation in standard applications.

Q: Are the contact materials and finishes identical?

A: Yes. Both parts feature copper contact material with electro-tin finish, ensuring identical electrical conductivity and corrosion resistance characteristics.

Q: What is the current inventory status?

A: The original LCDX1/0-12D-X has 706 pieces in stock. The substitute LCDX1/0-12-X has 746 pieces in stock and maintains active product status for ongoing availability.