LCDN2/0-14AH-X Equivalent & Substitute Parts

Part Overview

The LCDN2/0-14AH-X is a copper compression lug manufactured by Panduit Corp, classified as a rectangular tongue terminal connector designed for 2/0 AWG wire termination onto a 1/4" stud. This component features a two-stud hole configuration with electro-tin contact finish and non-insulated construction. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure component availability for new installations and maintenance applications.

Substiute Parts

LCDN2/0-14AH-X

Panduit CorpIn Stock: 727LCDN2/0-14AH-X Datasheet

Current PartRFQ

LCDN2/0-14A-X

Panduit CorpIn Stock: 956LCDN2/0-14A-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete LCDN2/0-14AH-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: Both the main part and substitute must accommodate 2/0 AWG wire termination.

Stud/Tab Size: The 1/4" stud requirement must be maintained to ensure proper mechanical fit within the assembly.

Terminal Configuration: Rectangular tongue geometry with two stud holes is required for functional interchangeability.

Electrical Properties: Copper contact material with electro-tin finish ensures equivalent electrical conductivity and corrosion resistance.

Barrel Dimensions: Barrel ID of 0.450" (11.43mm) and OD of 0.580" (14.73mm) must be preserved for crimp tool compatibility and wire seating.

Ring ID: The 0.270" (6.86mm) ring ID dimension must remain constant for stud mounting compatibility.

Termination Method: Crimp barrel termination is the required connection method.

Compliance: RoHS3 compliance is maintained across all equivalent parts.

The LCDN2/0-14A-X meets all these criteria and is classified as an active product with current manufacturing status.

Parameter Comparison

Engineering Selection Recommendations

The LCDN2/0-14A-X is the direct equivalent substitute for the obsolete LCDN2/0-14AH-X. Both components share identical electrical and mechanical specifications across all critical parameters that determine functional interchangeability. The substitute part is manufactured by the same supplier (Panduit Corp) within the same Pan-Lug™ series and maintains full RoHS3 compliance.

The primary distinction between the two parts is product status: the LCDN2/0-14AH-X is obsolete, while the LCDN2/0-14A-X is active with current manufacturing availability. The substitute part is available in bulk packaging with 864 pieces in current stock inventory.

Minor dimensional variations exist in tab thickness (0.130" versus 0.140") and overall length (not specified versus 2.710"), which do not affect electrical performance or mechanical compatibility within standard assembly configurations. These variations are within normal manufacturing tolerances for this component category.

For applications requiring the LCDN2/0-14AH-X, the LCDN2/0-14A-X provides full functional equivalence with the advantage of active product status and assured supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can the LCDN2/0-14A-X be used as a direct replacement for the LCDN2/0-14AH-X?

A: Yes. Both components are electrically and mechanically equivalent. They share identical wire gauge (2/0 AWG), stud size (1/4"), terminal configuration, barrel dimensions, and contact specifications. The substitute part is manufactured by the same supplier and maintains identical compliance certifications.

Q: What is the primary reason for substitution?

A: The LCDN2/0-14AH-X is classified as obsolete. The LCDN2/0-14A-X is the active equivalent with current manufacturing status and assured availability.

Q: Are there differences in physical dimensions between these parts?

A: Minor variations exist in tab thickness (0.130" versus 0.140") and overall length. These differences fall within normal manufacturing tolerances and do not affect electrical performance or assembly compatibility.

Q: What packaging options are available for the substitute part?

A: The LCDN2/0-14A-X is supplied in bulk packaging with current inventory of 864 pieces.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the LCDN2/0-14AH-X and LCDN2/0-14A-X are RoHS3 compliant and classified under the same ECCN (EAR99) and HTSUS (8536.90.4000) codes.

Q: What wire gauge does this terminal accommodate?

A: Both parts are designed for 2/0 AWG wire termination.

Q: What is the stud size for mounting?

A: Both parts feature a 1/4" stud mounting configuration.

Q: What termination method is used?

A: Both parts utilize crimp barrel termination. The barrel ID is 0.450" (11.43mm) and OD is 0.580" (14.73mm).

Q: Is insulation included on these terminals?

A: No. Both the LCDN2/0-14AH-X and LCDN2/0-14A-X are non-insulated terminals.

Q: What contact material and finish are specified?

A: Both parts feature copper contact material with electro-tin finish, providing equivalent electrical conductivity and corrosion resistance.