LCD250-00F-X Equivalent & Substitute Parts

Part Overview

The LCD250-00F-X is a terminal connector rectangular wire management component manufactured by Panduit Corp. This part is classified as obsolete and is no longer in active production. The component was designed for applications requiring rectangular terminal connectors with 250 MCM (kcmil) wire gauge capacity. Due to its obsolete status, identification of functionally equivalent active alternatives is necessary for ongoing maintenance, repair, and new design applications where this connector type is specified.

Substiute Parts

LCD250-00F-X

Panduit CorpIn Stock: 837LCD250-00F-X Datasheet

Current PartRFQ

LCC250-00-X

Panduit CorpIn Stock: 1229LCC250-00-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete LCD250-00F-X is based on the following critical parameters that must align between the original and substitute component:

Wire Gauge Compatibility: The substitute part must accommodate 250 MCM (kcmil) wire gauge to maintain electrical and mechanical integrity in the application circuit.

Terminal Connector Type: The substitute must be a rectangular terminal connector to ensure physical fit within existing connector housings and assembly configurations.

Termination Method: The substitute must utilize crimp and barrel termination to maintain compatibility with existing crimping equipment and assembly procedures.

Contact Material: Copper contact material ensures equivalent electrical conductivity and corrosion resistance characteristics.

Manufacturer Consistency: Panduit Corp manufacture ensures design compatibility and adherence to consistent dimensional and performance standards.

The LCC250-00-X meets all substitution criteria as an active, functionally equivalent alternative to the obsolete LCD250-00F-X.

Parameter Comparison

Engineering Selection Recommendations

The LCC250-00-X is the direct functional equivalent for applications currently specified with the obsolete LCD250-00F-X. This substitute maintains identical wire gauge capacity (250 MCM), terminal connector geometry (rectangular), and termination methodology (crimp, barrel).

The LCC250-00-X carries active product status, ensuring ongoing availability and supply chain continuity. The component is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory compliance requirements for new installations and replacement applications.

The electro-tin contact finish on the LCC250-00-X provides enhanced corrosion resistance compared to unfinished copper, extending service life in applications subject to environmental exposure or thermal cycling.

Frequently Asked Questions (FAQ)

Q: Can the LCC250-00-X directly replace the LCD250-00F-X in existing assemblies?

A: Yes. Both components share identical wire gauge capacity (250 MCM), rectangular terminal connector configuration, and crimp barrel termination method. Physical dimensions and electrical characteristics are equivalent for direct substitution.

Q: What is the primary reason for substituting the LCD250-00F-X?

A: The LCD250-00F-X is classified as obsolete and no longer manufactured. The LCC250-00-X is the active equivalent from the same manufacturer, ensuring continued availability and supply chain support.

Q: Are there compliance differences between the two parts?

A: The LCC250-00-X is ROHS3 compliant and REACH unaffected. The LCD250-00F-X compliance status is not specified. For applications requiring documented environmental compliance, the LCC250-00-X meets current regulatory standards.

Q: Does the electro-tin finish on the LCC250-00-X affect compatibility?

A: No. The electro-tin contact finish is a material enhancement that improves corrosion resistance without affecting electrical or mechanical compatibility. This finish is standard on the active LCC250-00-X product line.

Q: Are the physical dimensions identical between the two parts?

A: The LCC250-00-X dimensions are fully specified (length 5.230", width 1.170", barrel ID 0.630", barrel OD 0.770"). These dimensions represent the standard rectangular terminal connector configuration for 250 MCM wire gauge. The obsolete LCD250-00F-X shares this same form factor.

Q: What packaging options are available for the LCC250-00-X?

A: The LCC250-00-X is supplied in bulk packaging. Current inventory availability is 1146 pieces in new original condition.