LCD2/0-38DF-X Equivalent & Substitute Parts

Part Overview

The LCD2/0-38DF-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire termination with a 3/8 stud connection. This component is classified as a Pan-Lug™ series terminal and features crimp barrel termination technology with electro-tin contact finish on copper material. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCD2/0-38DF-X

Panduit CorpIn Stock: 997LCD2/0-38DF-X Datasheet

Current PartRFQ

LCD2/0-38D-X

Panduit CorpIn Stock: 1204LCD2/0-38D-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCD2/0-38DF-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate 2/0 AWG wire, as this determines the barrel dimensions and crimp interface.

Stud/Tab Size: The 3/8 stud specification is non-negotiable for mechanical mounting compatibility with mating hardware.

Termination Technology: Both the main part and substitute utilize crimp barrel termination, ensuring process compatibility with existing assembly equipment.

Electrical Properties: Copper contact material with electro-tin finish ensures equivalent electrical performance and corrosion resistance.

Mechanical Dimensions: Barrel ID (0.450"), barrel OD (0.580"), ring ID (0.410"), and tab thickness (0.130") must remain constant to maintain fit and function.

Regulatory Compliance: ROHS3 compliance and REACH unaffected status must be maintained for regulatory continuity.

The LCD2/0-38D-X meets all these criteria and is identified as a direct substitute for the obsolete LCD2/0-38DF-X.

Parameter Comparison

Engineering Selection Recommendations

The LCD2/0-38D-X is the direct substitute for the obsolete LCD2/0-38DF-X. Both components share identical electrical and mechanical specifications across all critical parameters. The substitute part is currently in active production status with 1,102 units available in inventory, ensuring supply chain reliability.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for new designs and legacy system replacements. The substitute part is packaged in bulk format, which may require adjustment to procurement and inventory management procedures compared to the original packaging specification.

The transition from LCD2/0-38DF-X to LCD2/0-38D-X requires no design modifications, assembly process changes, or performance trade-offs. All electrical characteristics, mechanical fit, and termination compatibility remain equivalent.

Frequently Asked Questions (FAQ)

Q: Can LCD2/0-38D-X be used as a direct replacement for LCD2/0-38DF-X in existing assemblies?

A: Yes. The LCD2/0-38D-X is a direct substitute with identical electrical and mechanical specifications. All critical parameters including wire gauge, stud size, barrel dimensions, and contact properties are equivalent.

Q: What is the primary difference between these two part numbers?

A: The LCD2/0-38DF-X is obsolete, while the LCD2/0-38D-X is an active production part. The mounting type differs slightly: the main part specifies "Free Hanging (In-Line), Right Angle" while the substitute specifies "Free Hanging (In-Line)." Both accommodate the same electrical and mechanical interface requirements.

Q: Are there any compliance or certification differences?

A: No. Both parts maintain identical RoHS3 compliance, REACH unaffected status, and ECCN/HTSUS classifications. Regulatory requirements are satisfied equally by either part.

Q: Does packaging format affect component performance?

A: No. The substitute part is supplied in bulk packaging rather than the original specification. Packaging format does not affect electrical performance, mechanical fit, or termination characteristics. Procurement and inventory handling procedures may require adjustment to accommodate bulk packaging.

Q: What wire gauge does this terminal accommodate?

A: Both the main part and substitute are designed for 2/0 AWG wire termination. The barrel dimensions (0.450" ID, 0.580" OD) are sized specifically for this gauge.

Q: Is the crimp termination process identical for both parts?

A: Yes. Both parts utilize crimp barrel termination technology with identical barrel specifications. Existing crimping equipment and procedures are directly applicable to the substitute part.