LCD2/0-14AH-X Equivalent & Substitute Parts

Part Overview

The LCD2/0-14AH-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire termination with a 1/4 inch stud connection. This component is classified as a Pan-Lug™ series terminal and features crimp barrel termination technology with electro-tin contact finish on copper material.

The LCD2/0-14AH-X is currently listed as obsolete. Locating equivalent or substitute components is necessary to maintain system functionality and ensure continued availability for repair, replacement, or new assembly applications where this terminal specification is required.

Substiute Parts

LCD2/0-14AH-X

Panduit CorpIn Stock: 1162LCD2/0-14AH-X Datasheet

Current PartRFQ

LCD2/0-14A-X

Panduit CorpIn Stock: 1093LCD2/0-14A-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCD2/0-14AH-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate 2/0 AWG wire termination.

Stud/Tab Size Equivalence: The substitute part must feature a 1/4 inch stud connection to ensure mechanical compatibility with mating hardware.

Terminal Geometry: The substitute part must maintain rectangular tongue configuration with two stud holes and identical tab thickness of 0.130 inches (3.30mm).

Barrel Dimensions: Barrel inner diameter (0.450 inches), outer diameter (0.580 inches), and ring inner diameter (0.270 inches) must remain constant.

Termination Technology: The substitute part must utilize crimp barrel termination methodology.

Material and Finish Specifications: Copper contact material with electro-tin finish is required for electrical performance and corrosion resistance.

Regulatory Compliance: The substitute part must maintain ROHS3 compliance status.

The LCD2/0-14A-X meets all substitution criteria and is classified as an active product, providing a direct functional equivalent to the obsolete LCD2/0-14AH-X.

Parameter Comparison

Engineering Selection Recommendations

The LCD2/0-14A-X is the direct substitute for the obsolete LCD2/0-14AH-X. Both components share identical electrical and mechanical specifications across all critical parameters including wire gauge, stud size, terminal geometry, barrel dimensions, termination methodology, and contact material specifications.

The LCD2/0-14A-X maintains ROHS3 compliance status, ensuring regulatory alignment with the original component. The substitute part is currently in active production status with confirmed inventory availability, providing reliable sourcing for replacement and new assembly applications.

The primary distinction between the two components is the mounting type specification. The LCD2/0-14AH-X includes a 45° angle mounting configuration, while the LCD2/0-14A-X specifies standard free hanging in-line mounting. This difference does not affect the terminal's electrical performance or mechanical compatibility with 2/0 AWG wire and 1/4 inch stud connections. The LCD2/0-14A-X is suitable for applications where the original mounting angle specification is not a critical design constraint.

Frequently Asked Questions (FAQ)

Q: Can the LCD2/0-14A-X directly replace the LCD2/0-14AH-X in existing assemblies?

A: The LCD2/0-14A-X is electrically and mechanically equivalent to the LCD2/0-14AH-X across all critical parameters. Both components accommodate 2/0 AWG wire, feature 1/4 inch stud connections, and utilize identical barrel dimensions and crimp termination technology. The substitute part is suitable for direct replacement in applications where the 45° angle mounting specification of the original component is not a design requirement.

Q: What are the key compatibility criteria for this terminal substitution?

A: Compatibility is determined by wire gauge (2/0 AWG), stud size (1/4 inch), terminal geometry (rectangular tongue with two stud holes), barrel dimensions (0.450" ID, 0.580" OD), termination method (crimp barrel), contact material (copper with electro-tin finish), and regulatory compliance (ROHS3). The LCD2/0-14A-X meets all these criteria.

Q: Does the LCD2/0-14A-X meet the same regulatory requirements as the original part?

A: Yes. Both the LCD2/0-14AH-X and LCD2/0-14A-X are ROHS3 compliant and REACH unaffected. The substitute part maintains identical regulatory status and compliance certifications.

Q: What is the difference in mounting type between these two components?

A: The LCD2/0-14AH-X specifies free hanging in-line mounting with a 45° angle configuration. The LCD2/0-14A-X specifies standard free hanging in-line mounting without the angle specification. This difference relates to the physical orientation capability during installation but does not affect electrical performance or mechanical compatibility with mating hardware.

Q: Is the LCD2/0-14A-X currently available for purchase?

A: The LCD2/0-14A-X is classified as an active product with confirmed inventory availability. The LCD2/0-14AH-X is obsolete and no longer in production.

Q: Are there any dimensional differences between these components?

A: All critical electrical and mechanical dimensions are identical. The LCD2/0-14A-X specifies an overall length of 2.700 inches (68.58mm), while the LCD2/0-14AH-X does not provide an overall length specification. All other dimensions, including tab thickness, barrel dimensions, and ring inner diameter, are identical between the two components.