LCD2/0-12H-X Equivalent & Substitute Parts

Part Overview

The LCD2/0-12H-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire termination with a 1/2 stud connection. This component is classified as a Pan-Lug™ series terminal and features a crimp barrel termination method with electro-tin contact finish on copper material. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCD2/0-12H-X

Panduit CorpIn Stock: 1007LCD2/0-12H-X Datasheet

Current PartRFQ

LCD2/0-12-X

Panduit CorpIn Stock: 945LCD2/0-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCD2/0-12H-X is determined by strict equivalence across the following critical parameters:

Wire gauge compatibility (2/0 AWG) ensures proper current-carrying capacity and barrel crimp dimensions. The stud size (1/2 stud) and terminal type (rectangular tongue) define the mechanical interface with mating hardware. Barrel dimensions (ID 0.450", OD 0.580") and ring ID (0.530") establish the crimp geometry and ring contact area. Tab thickness (0.130") maintains structural integrity under load. Contact material (copper) and finish (electro-tin) provide electrical conductivity and corrosion resistance. Non-insulated construction and ROHS3 compliance are fixed requirements.

The substitute LCD2/0-12-X maintains all these parameters identically. The primary difference is product status (active versus obsolete) and mounting configuration (free hanging in-line without 45° angle specification). This substitution is valid for applications where the 45° angle mounting feature of the original part is not a functional requirement.

Parameter Comparison

Engineering Selection Recommendations

The LCD2/0-12-X serves as the direct active equivalent to the obsolete LCD2/0-12H-X. Both components share identical electrical and mechanical specifications across all critical parameters: wire gauge, stud size, terminal geometry, barrel dimensions, contact material, and contact finish. Both maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current applications.

The primary distinction is product lifecycle status. The LCD2/0-12H-X is obsolete, while the LCD2/0-12-X is active and maintains current manufacturing support and inventory availability (913 pieces in stock versus 984 pieces for the obsolete variant). The mounting configuration differs: the main part specifies 45° angle mounting, while the substitute specifies standard free hanging in-line mounting. Selection of the LCD2/0-12-X is appropriate for applications where the 45° angle feature is not a functional requirement or where standard in-line mounting is acceptable.

Frequently Asked Questions (FAQ)

Q: Are the LCD2/0-12H-X and LCD2/0-12-X electrically equivalent?

A: Yes. Both components are rated for 2/0 AWG wire termination with identical barrel dimensions (0.450" ID, 0.580" OD), ring ID (0.530"), and contact specifications (copper with electro-tin finish). Electrical performance is equivalent.

Q: What is the functional difference between these two parts?

A: The primary difference is mounting configuration. The LCD2/0-12H-X includes a 45° angle mounting feature, while the LCD2/0-12-X is configured for standard free hanging in-line mounting. Both provide identical electrical connection through the rectangular tongue terminal and 1/2 stud interface.

Q: Can I use the LCD2/0-12-X as a direct replacement for the LCD2/0-12H-X?

A: Direct substitution is valid when the 45° angle mounting feature is not required by the application. If the application specifically requires 45° angle orientation, the mounting configuration difference must be evaluated against the mechanical constraints of the assembly.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the LCD2/0-12H-X and LCD2/0-12-X are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

Q: Why is the LCD2/0-12H-X listed as obsolete?

A: Product obsolescence is determined by manufacturer lifecycle decisions. The active equivalent LCD2/0-12-X provides identical electrical and mechanical function and is recommended for new designs and ongoing supply requirements.

Q: What packaging options are available?

A: The LCD2/0-12H-X is supplied in standard packaging (packaging type not specified in documentation). The LCD2/0-12-X is supplied in bulk packaging. Confirm packaging requirements with procurement specifications.

Q: Are there any wire gauge or stud size variations available in this terminal family?

A: The information provided covers only the 2/0 AWG, 1/2 stud configuration. Other wire gauges and stud sizes within the Pan-Lug™ series may exist; consult the complete product catalog for alternative specifications.