LCD1-38DH-E Equivalent & Substitute Parts

Part Overview

The LCD1-38DH-E is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1 AWG wire gauge applications with a 3/8 stud configuration. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and ensure design compatibility in new procurement cycles.

Substiute Parts

LCD1-38DH-E

Panduit CorpIn Stock: 831LCD1-38DH-E Datasheet

Current PartRFQ

LCD1-38D-E

Panduit CorpIn Stock: 1057LCD1-38D-E Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCD1-38DH-E is determined by the following critical parameters:

Electrical Compatibility Parameters:

• Wire gauge: 1 AWG
• Stud/tab size: 3/8 Stud
• Terminal type: Rectangular Tongue
• Terminal style: Two Stud Holes
• Termination method: Crimp, Barrel
• Contact material: Copper
• Contact finish: Electro-Tin

Mechanical Compatibility Parameters:

• Tab thickness: 0.110" (2.79mm)
• Width - Outer Edges: 0.700" (17.78mm)
• Barrel ID: 0.360" (9.14mm)
• Barrel OD: 0.470" (11.94mm)
• Ring ID: 0.410" (10.41mm)

Regulatory Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The LCD1-38D-E qualifies as a direct substitute based on identical electrical and mechanical specifications across all critical parameters.

Parameter Comparison

Engineering Selection Recommendations

The LCD1-38D-E serves as the direct functional equivalent to the obsolete LCD1-38DH-E. Both components share identical electrical and mechanical specifications, ensuring drop-in compatibility within existing circuit designs and assembly processes.

The primary distinction between these parts is product status: LCD1-38DH-E is obsolete, while LCD1-38D-E maintains active production status. Both components maintain ROHS3 compliance and REACH unaffected status, satisfying current regulatory requirements for new designs and procurement.

The LCD1-38D-E is available in bulk packaging with 986 units in current stock, providing supply chain reliability for production requirements. Selection of the active equivalent part eliminates obsolescence risk and ensures long-term component availability.

Frequently Asked Questions (FAQ)

Q: Can LCD1-38D-E replace LCD1-38DH-E in existing assemblies?

A: Yes. The LCD1-38D-E is electrically and mechanically identical to the LCD1-38DH-E across all critical parameters including wire gauge, stud size, terminal geometry, and contact specifications. Direct substitution is supported without design modification.

Q: What is the primary difference between these two part numbers?

A: The LCD1-38DH-E is classified as obsolete, while the LCD1-38D-E maintains active production status. The mounting type differs: LCD1-38DH-E specifies free hanging with 45° angle mounting, while LCD1-38D-E specifies free hanging in-line mounting. All electrical and contact specifications remain identical.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both LCD1-38DH-E and LCD1-38D-E are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component procurement.

Q: What packaging options are available for the substitute part?

A: The LCD1-38D-E is supplied in bulk packaging with 986 units currently in stock. The original LCD1-38DH-E packaging specification was not provided in the technical data.

Q: Are there any performance differences between these terminals?

A: No. Both terminals feature identical copper contact material with electro-tin finish, identical barrel dimensions (0.360" ID, 0.470" OD), and identical ring ID of 0.410". Crimp and barrel termination specifications are identical for 1 AWG wire gauge applications.

Q: Can I use LCD1-38D-E for new designs?

A: Yes. The LCD1-38D-E is the recommended selection for new designs due to its active product status, ensuring long-term availability and supply chain continuity. All electrical and mechanical specifications support direct application in 1 AWG rectangular tongue terminal connector requirements.