LCD1-14BH-E Equivalent & Substitute Parts

Part Overview

The LCD1-14BH-E is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1 AWG wire gauge applications with a 1/4" stud connection. This component is classified as a Pan-Lug™ series terminal and features a non-insulated copper construction with electro-tin contact finish. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCD1-14BH-E

Panduit CorpIn Stock: 833LCD1-14BH-E Datasheet

Current PartRFQ

LCD1-14B-E

Panduit CorpIn Stock: 876LCD1-14B-E Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The LCD1-14BH-E has been identified with one equivalent substitute part based on strict parameter alignment within the Pan-Lug™ terminal series. Substitution eligibility is determined by the following critical parameters:

Substitution Criteria:

• Wire gauge: 1 AWG
• Stud/tab size: 1/4 Stud
• Terminal type: Rectangular Tongue
• Terminal style: Two Stud Holes
• Tab thickness: 0.110" (2.79mm)
• Width - outer edges: 0.700" (17.78mm)
• Termination method: Crimp, Barrel
• Contact material: Copper
• Contact finish: Electro-Tin
• Barrel ID: 0.360" (9.14mm)
• Barrel OD: 0.470" (11.94mm)
• Ring ID: 0.270" (6.86mm)
• Insulation: Non-Insulated
• RoHS compliance: ROHS3 Compliant

The substitute part LCD1-14B-E maintains all critical electrical and mechanical parameters while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The LCD1-14B-E serves as the direct equivalent substitute for the obsolete LCD1-14BH-E. Both components are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component applications. The substitute part maintains identical electrical and mechanical specifications across all critical parameters including wire gauge, stud size, barrel dimensions, and contact properties.

The primary distinction between the two parts is product status: LCD1-14BH-E is obsolete while LCD1-14B-E is active. The substitute part is available in bulk packaging with confirmed inventory of 776 pieces in stock, compared to the main part's limited obsolete inventory of 728 pieces.

For new designs and ongoing production requirements, LCD1-14B-E is the appropriate selection. For legacy system maintenance where the original part number must be retained, LCD1-14B-E provides functional equivalence with assured long-term availability.

Frequently Asked Questions (FAQ)

Q: Can LCD1-14B-E be used as a direct replacement for LCD1-14BH-E?

A: Yes. Both parts are identical in all critical electrical and mechanical parameters including wire gauge (1 AWG), stud size (1/4"), barrel dimensions, contact material, and contact finish. The parts are functionally interchangeable in all applications.

Q: What is the difference between LCD1-14BH-E and LCD1-14B-E?

A: The primary difference is product status. LCD1-14BH-E is obsolete, while LCD1-14B-E is active. Additionally, LCD1-14B-E is supplied in bulk packaging. All technical specifications are identical.

Q: Why is LCD1-14BH-E listed as obsolete?

A: The obsolete designation indicates the part is no longer in active production. LCD1-14B-E is the active equivalent that should be used for current and future applications.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical ROHS3 compliance and REACH unaffected status, meeting all current regulatory requirements.

Q: What mounting type applies to these terminals?

A: LCD1-14BH-E features free hanging (in-line) mounting with 45° angle capability. LCD1-14B-E features free hanging (in-line) mounting without the 45° angle specification. Both are suitable for standard mounting applications.

Q: What is the wire gauge compatibility?

A: Both parts are rated for 1 AWG wire gauge with crimp barrel termination. The barrel dimensions (0.360" ID, 0.470" OD) are identical across both parts.

Q: Is inventory availability a consideration for part selection?

A: Yes. LCD1-14B-E has 776 pieces in stock with active product status, ensuring long-term availability. LCD1-14BH-E has 728 pieces in limited obsolete inventory.