LCD1-14BF-E Equivalent & Substitute Parts

Part Overview

The LCD1-14BF-E is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1 AWG wire gauge applications with a 1/4 stud connection. This component is classified as obsolete, which necessitates identification of active equivalent parts to maintain supply chain continuity and ensure design compatibility in applications requiring this terminal specification.

Key Parameters

Parameter	Value
Manufacturer Part Number	LCD1-14BF-E
Manufacturer	Panduit Corp
Category	Terminals
Series	Pan-Lug™
Terminal Type	Rectangular Tongue
Wire Gauge	1 AWG
Stud/Tab Size	1/4 Stud
Terminal Style	Two Stud Holes
Tab Thickness	0.110" (2.79mm)
Width - Outer Edges	0.700" (17.78mm)
Termination Method	Crimp, Barrel
Insulation	Non-Insulated
Color	Green
Contact Finish	Electro-Tin
Contact Material	Copper
Diameter - Barrel ID	0.360" (9.14mm)
Diameter - Barrel OD	0.470" (11.94mm)
Diameter - Ring ID	0.270" (6.86mm)
RoHS Status	ROHS3 Compliant
REACH Status	REACH Unaffected
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the LCD1-14BF-E is determined by equivalence across the following critical parameters:

Electrical Compatibility Parameters:

Wire Gauge: 1 AWG
Stud/Tab Size: 1/4 Stud
Termination Method: Crimp, Barrel
Contact Material: Copper
Contact Finish: Electro-Tin

Mechanical Compatibility Parameters:

Terminal Type: Rectangular Tongue
Terminal Style: Two Stud Holes
Tab Thickness: 0.110" (2.79mm)
Width - Outer Edges: 0.700" (17.78mm)
Barrel ID: 0.360" (9.14mm)
Barrel OD: 0.470" (11.94mm)
Ring ID: 0.270" (6.86mm)

Regulatory Compliance Parameters:

RoHS Status: ROHS3 Compliant
REACH Status: REACH Unaffected
Series: Pan-Lug™

The substitute part LCD1-14B-E maintains all critical electrical and mechanical parameters while offering active product status and improved supply availability.

Parameter Comparison

Parameter	LCD1-14BF-E (Main Part)	LCD1-14B-E (Substitute)	Match Status
Manufacturer	Panduit Corp	Panduit Corp	Identical
Series	Pan-Lug™	Pan-Lug™	Identical
Terminal Type	Rectangular Tongue	Rectangular Tongue	Identical
Wire Gauge	1 AWG	1 AWG	Identical
Stud/Tab Size	1/4 Stud	1/4 Stud	Identical
Terminal Style	Two Stud Holes	Two Stud Holes	Identical
Tab Thickness	0.110" (2.79mm)	0.110" (2.79mm)	Identical
Width - Outer Edges	0.700" (17.78mm)	0.700" (17.78mm)	Identical
Termination Method	Crimp, Barrel	Crimp, Barrel	Identical
Insulation	Non-Insulated	Non-Insulated	Identical
Color	Green	Green	Identical
Contact Finish	Electro-Tin	Electro-Tin	Identical
Contact Material	Copper	Copper	Identical
Diameter - Barrel ID	0.360" (9.14mm)	0.360" (9.14mm)	Identical
Diameter - Barrel OD	0.470" (11.94mm)	0.470" (11.94mm)	Identical
Diameter - Ring ID	0.270" (6.86mm)	0.270" (6.86mm)	Identical
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Identical
REACH Status	REACH Unaffected	REACH Unaffected	Identical
Product Status	Obsolete	Active	Substitute is Active
Mounting Type	Free Hanging (In-Line), Right Angle	Free Hanging (In-Line)	Substitute has reduced mounting options

Engineering Selection Recommendations

The LCD1-14B-E serves as a direct functional equivalent to the obsolete LCD1-14BF-E. Both components are manufactured by Panduit Corp within the Pan-Lug™ series and maintain identical electrical and mechanical specifications across all critical parameters including wire gauge, stud size, barrel dimensions, and contact properties.

The primary distinction between these parts is product status: LCD1-14BF-E is obsolete while LCD1-14B-E maintains active status with current manufacturing and supply availability. Both components satisfy ROHS3 compliance and REACH unaffected regulatory requirements.

The mounting type specification differs between the two parts. The LCD1-14BF-E supports both Free Hanging (In-Line) and Right Angle mounting configurations, while the LCD1-14B-E is specified for Free Hanging (In-Line) mounting only. Applications requiring right angle mounting geometry must evaluate this distinction against specific installation requirements.

Frequently Asked Questions (FAQ)

Q: Can LCD1-14B-E be used as a direct replacement for LCD1-14BF-E?

A: Yes. The LCD1-14B-E maintains identical electrical and mechanical specifications across all critical parameters including wire gauge (1 AWG), stud size (1/4), barrel dimensions, contact material, and contact finish. Both components are ROHS3 compliant and REACH unaffected.

Q: What is the primary reason to substitute LCD1-14BF-E with LCD1-14B-E?

A: The LCD1-14BF-E is classified as obsolete, which creates supply chain risk. The LCD1-14B-E is an active product with current manufacturing and inventory availability, ensuring long-term component sourcing for new designs and production runs.

Q: Are there any differences in mounting configuration between these parts?

A: Yes. The LCD1-14BF-E supports both Free Hanging (In-Line) and Right Angle mounting types. The LCD1-14B-E is specified for Free Hanging (In-Line) mounting only. Applications requiring right angle mounting geometry should confirm that in-line mounting satisfies installation requirements.

Q: Do both parts use the same termination method?

A: Yes. Both LCD1-14BF-E and LCD1-14B-E use crimp barrel termination for 1 AWG wire connections.

Q: Are the barrel dimensions identical between these parts?

A: Yes. Both components have identical barrel specifications: 0.360" (9.14mm) inner diameter, 0.470" (11.94mm) outer diameter, and 0.270" (6.86mm) ring inner diameter.

Q: What is the packaging difference between these parts?

A: The LCD1-14BF-E is supplied in standard packaging, while the LCD1-14B-E is supplied in bulk packaging. Bulk packaging is suitable for high-volume production environments and offers cost efficiency for large quantity orders.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both LCD1-14BF-E and LCD1-14B-E are ROHS3 compliant and REACH unaffected, satisfying current environmental and regulatory standards.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message