LCD1/0-56D-X Equivalent & Substitute Parts

Part Overview

The LCD1/0-56D-X is a copper compression lug terminal connector manufactured by Panduit Corp, designed for rectangular terminal applications with two-hole mounting configuration. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing procurement and system maintenance. The part is ROHS3 compliant and carries EAR99 export classification.

Substiute Parts

LCD1/0-56D-X

Panduit CorpIn Stock: 681LCD1/0-56D-X Datasheet

Current PartRFQ

LCC1/0-00-X

Panduit CorpIn Stock: 1189LCC1/0-00-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCD1/0-56D-X is based on alignment of the following critical parameters:

Wire Gauge Compatibility: Both the main part and substitute maintain 1/0 AWG wire gauge specification, ensuring equivalent current-carrying capacity and termination requirements.

Material Specification: Copper contact material is maintained across the substitute part, preserving electrical conductivity and corrosion resistance characteristics.

Manufacturer Consistency: The substitute part is sourced from the same manufacturer (Panduit Corp), ensuring design compatibility and quality standards.

Regulatory Compliance: Both parts maintain ROHS3 compliance and EAR99 export classification, satisfying regulatory requirements for equivalent substitution.

Terminal Configuration: The substitute part maintains rectangular terminal connector classification, supporting equivalent mounting and connection interfaces.

Product Status Transition: The substitute part (LCC1/0-00-X) carries active product status, providing long-term availability and supply chain continuity.

Parameter Comparison

Engineering Selection Recommendations

The LCC1/0-00-X serves as the direct substitute for the obsolete LCD1/0-56D-X based on the following engineering criteria:

Regulatory Alignment: Both parts maintain identical ROHS3 compliance status and EAR99 export classification, eliminating regulatory substitution barriers.

Electrical Specifications: Wire gauge (1/0 AWG) and copper contact material are preserved, maintaining equivalent electrical performance in terminal applications.

Supply Chain Continuity: The substitute part carries active product status with documented inventory availability (1092 Pcs), ensuring reliable procurement for replacement and new applications.

Manufacturer Consistency: Sourcing from the same manufacturer (Panduit Corp) within the Pan-Lug™ series maintains design compatibility and quality assurance standards.

Mechanical Compatibility: Both parts are classified as rectangular terminal connectors, supporting equivalent mounting configurations and connection interfaces in existing assemblies.

Frequently Asked Questions (FAQ)

Q: Can the LCC1/0-00-X directly replace the LCD1/0-56D-X in existing applications?

A: The LCC1/0-00-X is the designated substitute for the obsolete LCD1/0-56D-X. Both parts maintain 1/0 AWG wire gauge, copper contact material, and identical regulatory compliance (ROHS3, EAR99). Physical mounting and electrical interface compatibility must be verified against specific application requirements.

Q: What is the primary reason for substitution?

A: The LCD1/0-56D-X is classified as obsolete. The LCC1/0-00-X is an active product from the same manufacturer, providing long-term supply chain continuity and procurement reliability.

Q: Are there differences in terminal configuration between these parts?

A: The LCD1/0-56D-X is specified as a two-hole compression lug. The LCC1/0-00-X is classified as a rectangular tongue terminal with crimp barrel termination. Application-specific mounting requirements must be evaluated to confirm compatibility.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both the LCD1/0-56D-X and LCC1/0-00-X are ROHS3 compliant and carry EAR99 export classification, satisfying equivalent regulatory requirements.

Q: What is the wire gauge specification for both parts?

A: Both parts are specified for 1/0 AWG wire gauge, ensuring equivalent current-carrying capacity and termination requirements.

Q: Is the contact material the same for both parts?

A: Yes. Both parts utilize copper contact material, maintaining equivalent electrical conductivity and corrosion resistance characteristics.

Q: What packaging is available for the substitute part?

A: The LCC1/0-00-X is supplied in bulk packaging with 1092 pieces available in current inventory.