LCCXF3/0-38D-X Equivalent & Substitute Parts

Part Overview

The LCCXF3/0-38D-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 3/0 AWG wire gauge applications with a 3/8 stud connection. This component is classified as obsolete, indicating discontinuation from active production. The non-insulated terminal features a two stud hole configuration and is part of the Pan-Lug™ series. Due to its obsolete status, identification of equivalent substitute parts is necessary to maintain system compatibility and ensure continued availability for replacement and maintenance applications.

Substiute Parts

LCCXF3/0-38D-X

Panduit CorpIn Stock: 1156LCCXF3/0-38D-X Datasheet

Current PartRFQ

LCCX3/0-38D-X

Panduit CorpIn Stock: 859LCCX3/0-38D-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCCXF3/0-38D-X is determined by strict alignment of the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate 3/0 AWG wire gauge to ensure proper electrical conductivity and mechanical fit within the barrel termination area.

Stud/Tab Size Alignment: The 3/8 stud dimension is a fixed mechanical interface requirement. Substitute parts must feature identical 3/8 stud sizing to maintain compatibility with mating connectors and mounting hardware.

Terminal Type and Style: The rectangular tongue configuration with two stud holes defines the physical form factor. Substitute parts must maintain this geometry to ensure proper installation and electrical connection.

Insulation Status: Both the main part and substitute must be non-insulated to maintain functional equivalence.

Electrical and Regulatory Compliance: ROHS3 compliance and EAR99 classification must be maintained across substitute selections.

The LCCX3/0-38D-X meets all these criteria and is identified as the direct substitute for the obsolete LCCXF3/0-38D-X.

Parameter Comparison

Engineering Selection Recommendations

The LCCX3/0-38D-X is the appropriate substitute for the obsolete LCCXF3/0-38D-X based on the following engineering criteria:

Product Status Alignment: The substitute part maintains active production status, ensuring long-term availability and supply chain continuity. The main part's obsolete classification necessitates transition to an active equivalent.

Regulatory Compliance: Both parts maintain ROHS3 compliance and EAR99 classification, satisfying regulatory requirements for equivalent component selection.

Functional Equivalence: Identical wire gauge (3/0 AWG), stud size (3/8), terminal type (rectangular tongue), and terminal style (two stud holes) confirm direct functional compatibility.

Series Consistency: Both components belong to the Pan-Lug™ series, maintaining design consistency within the product family.

The LCCX3/0-38D-X is available in bulk packaging with 765 pieces in current inventory, supporting immediate procurement for replacement applications.

Frequently Asked Questions (FAQ)

Q: Can the LCCX3/0-38D-X directly replace the LCCXF3/0-38D-X in existing installations?

A: Yes. Both parts share identical wire gauge (3/0 AWG), stud size (3/8), terminal type (rectangular tongue), and terminal style (two stud holes). The substitute part is functionally equivalent for all mechanical and electrical interfaces.

Q: What is the primary reason for substitution?

A: The LCCXF3/0-38D-X is classified as obsolete and no longer in active production. The LCCX3/0-38D-X is the active equivalent that maintains all critical electrical and mechanical parameters.

Q: Are there any compliance differences between the main part and substitute?

A: No. Both parts maintain ROHS3 compliance, EAR99 classification, and identical HTSUS coding (8536.90.4000). Regulatory requirements are fully satisfied by the substitute part.

Q: What packaging options are available for the substitute part?

A: The LCCX3/0-38D-X is supplied in bulk packaging with 765 pieces currently in inventory.

Q: Are the physical dimensions identical between the two parts?

A: The substitute part provides complete dimensional specifications including tab thickness (0.140"), overall length (3.810"), outer width (1.060"), barrel ID (0.570"), barrel OD (0.710"), and ring ID (0.410"). These dimensions ensure proper fit within existing mechanical assemblies.

Q: What is the termination method for the substitute part?

A: The LCCX3/0-38D-X uses crimp barrel termination, compatible with standard crimping equipment for 3/0 AWG wire applications.