LCCXF2-38DF-E Equivalent & Substitute Parts

Part Overview

The LCCXF2-38DF-E is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2 AWG wire gauge applications with a 3/8 stud connection. This component is part of the Pan-Lug™ series and features a two stud hole configuration for secure mounting. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure project completion without design modifications.

Substiute Parts

LCCXF2-38DF-E

Panduit CorpIn Stock: 926LCCXF2-38DF-E Datasheet

Current PartRFQ

LCCXF2-38D-E

Panduit CorpIn Stock: 1134LCCXF2-38D-E Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCCXF2-38DF-E is determined by strict equivalence across the following critical parameters:

• Wire Gauge: 2 AWG (electrical current capacity requirement)
• Stud/Tab Size: 3/8 Stud (mechanical mounting interface)
• Terminal Type: Rectangular Tongue (form factor and connection geometry)
• Terminal Style: Two Stud Holes (mounting configuration)
• Insulation: Non-Insulated (electrical exposure specification)
• Series: Pan-Lug™ (product family consistency)
• Manufacturer: Panduit Corp (design and quality standards)
• Compliance: ROHS3 Compliant, EAR99, HTSUS 8536.90.4000 (regulatory alignment)

The substitute part LCCXF2-38D-E maintains identical specifications across all these parameters, with the primary distinction being product status transition from obsolete to active availability.

Parameter Comparison

Engineering Selection Recommendations

The LCCXF2-38D-E serves as the direct functional equivalent to the obsolete LCCXF2-38DF-E. Both components are manufactured by Panduit Corp and maintain identical electrical and mechanical specifications across all critical parameters. The substitute part is currently in active production status with confirmed inventory availability, whereas the original part is obsolete.

Selection of LCCXF2-38D-E is supported by:

• Full compliance with ROHS3 environmental standards
• Identical wire gauge and stud size specifications ensuring direct circuit compatibility
• Matching terminal geometry and mounting configuration
• Consistent regulatory classification (EAR99, HTSUS 8536.90.4000)
• Higher inventory availability (1120 units versus 820 units)
• Active product status ensuring continued supply chain access

Frequently Asked Questions (FAQ)

Q: Can LCCXF2-38D-E be used as a direct replacement for LCCXF2-38DF-E?

A: Yes. Both components share identical specifications for wire gauge (2 AWG), stud size (3/8), terminal type (rectangular tongue), terminal style (two stud holes), and insulation classification (non-insulated). The substitute part is electrically and mechanically equivalent.

Q: What is the difference between LCCXF2-38DF-E and LCCXF2-38D-E?

A: The primary difference is product status. LCCXF2-38DF-E is obsolete, while LCCXF2-38D-E is active. The packaging specification differs (unspecified versus bulk), and inventory levels vary. All functional and electrical parameters remain identical.

Q: Are both parts ROHS3 compliant?

A: Yes. Both LCCXF2-38DF-E and LCCXF2-38D-E are ROHS3 compliant and carry identical regulatory classifications (EAR99, HTSUS 8536.90.4000).

Q: Does packaging affect the substitution?

A: Packaging format (bulk versus unspecified) does not affect electrical or mechanical compatibility. Packaging selection depends on procurement and inventory management requirements rather than functional performance.

Q: What wire gauge does this terminal support?

A: Both the main part and substitute are rated for 2 AWG wire gauge applications.

Q: What is the stud size specification?

A: Both components feature a 3/8 stud connection interface.

Q: Is the terminal insulated?

A: No. Both LCCXF2-38DF-E and LCCXF2-38D-E are non-insulated terminals.