LCCX8-10B-L Equivalent & Substitute Parts

Part Overview

The LCCX8-10B-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 8 AWG wire termination on a #10 stud. This component is part of the Pan-Lug™ series and features a crimp barrel termination method with electro-tin contact finish on copper material. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and support ongoing applications requiring this terminal type.

Substiute Parts

LCCX8-10B-L

Panduit CorpIn Stock: 949LCCX8-10B-L Datasheet

Current PartRFQ

LCCX8-10A-L

Panduit CorpIn Stock: 1027LCCX8-10A-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCCX8-10B-L is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Wire Gauge: 8 AWG
• Stud/Tab Size: 10 Stud
• Terminal Type: Rectangular Tongue
• Termination Method: Crimp, Barrel
• Contact Material: Copper
• Contact Finish: Electro-Tin
• Insulation: Non-Insulated
• Mounting Type: Free Hanging (In-Line)
• Series: Pan-Lug™
• RoHS Status: ROHS3 Compliant

The LCCX8-10A-L meets all mandatory matching parameters and qualifies as a direct substitute. The primary distinction between these parts is overall length and product status, with the substitute part currently in active production status.

Parameter Comparison

Engineering Selection Recommendations

The LCCX8-10A-L is the qualified substitute for the obsolete LCCX8-10B-L. Both components maintain identical electrical and mechanical specifications across all critical parameters including wire gauge, stud size, termination method, contact material, and contact finish. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

The primary distinction is product status: the LCCX8-10B-L is obsolete while the LCCX8-10A-L is actively manufactured. The LCCX8-10A-L has a reduced overall length of 2.010" (51.05mm) compared to 2.140" (54.36mm) for the main part. This dimensional difference does not affect electrical performance or functional compatibility in standard applications. The substitute part is available in bulk packaging with current inventory of 959 pieces.

For applications where the specific length of the LCCX8-10B-L is a design constraint, dimensional compatibility must be confirmed before substitution.

Frequently Asked Questions (FAQ)

Q: Can the LCCX8-10A-L be used as a direct replacement for the LCCX8-10B-L?

A: Yes. The LCCX8-10A-L meets all mandatory electrical and mechanical specifications for the LCCX8-10B-L, including wire gauge (8 AWG), stud size (#10), termination method (crimp barrel), contact material (copper), and contact finish (electro-tin). Both parts are ROHS3 compliant and REACH unaffected.

Q: What is the difference between these two parts?

A: The primary differences are product status and overall length. The LCCX8-10B-L is obsolete, while the LCCX8-10A-L is actively produced. The LCCX8-10A-L has an overall length of 2.010" (51.05mm) compared to 2.140" (54.36mm) for the LCCX8-10B-L. All other dimensions, including tab thickness, width, barrel diameters, and ring ID, are identical.

Q: Will the shorter length of the LCCX8-10A-L affect my application?

A: The 0.130" (3.31mm) length reduction does not affect electrical performance or standard mechanical compatibility. However, applications with specific spatial or mounting constraints should confirm that the reduced length is acceptable for their design.

Q: What packaging is available for the substitute part?

A: The LCCX8-10A-L is available in bulk packaging with current inventory of 959 pieces in stock.

Q: Are both parts compliant with current regulations?

A: Yes. Both the LCCX8-10B-L and LCCX8-10A-L are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Why is the LCCX8-10B-L obsolete?

A: The LCCX8-10B-L has been discontinued by Panduit Corp. The LCCX8-10A-L serves as the active production equivalent and is the recommended source for new applications and replenishment.