LCCX2/0-12H-X Equivalent & Substitute Parts

Part Overview

The LCCX2/0-12H-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire termination with a 1/2 stud connection. This non-insulated copper terminal features electro-tin contact finish and is configured with two stud holes for secure mounting. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure component availability for new designs and field replacements.

Substiute Parts

LCCX2/0-12H-X

Panduit CorpIn Stock: 1053LCCX2/0-12H-X Datasheet

Current PartRFQ

LCCX2/0-12-X

Panduit CorpIn Stock: 1058LCCX2/0-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCCX2/0-12H-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate 2/0 AWG wire termination, as this parameter defines the current-carrying capacity and mechanical interface of the terminal.

Stud/Tab Size: The 1/2 stud connection is a fixed mechanical interface requirement. Substitutes must maintain this dimension for proper mounting and electrical continuity.

Terminal Type and Style: The rectangular tongue configuration with two stud holes must be preserved to ensure compatibility with existing mounting hardware and circuit board layouts.

Termination Method: Crimp and barrel termination characteristics must remain consistent to maintain compatibility with existing assembly equipment and procedures.

Electrical Properties: Contact material (copper), contact finish (electro-tin), and barrel dimensions (ID 0.510", OD 0.640") must be identical to ensure equivalent electrical performance and corrosion resistance.

Regulatory Compliance: RoHS3 compliance and REACH unaffected status must be maintained for regulatory continuity.

The primary distinction between the main part and its substitute relates to mounting configuration and product status. The LCCX2/0-12H-X features a 45° angle mounting type and is obsolete, while the substitute LCCX2/0-12-X offers free hanging (in-line) mounting and active product status.

Parameter Comparison

Engineering Selection Recommendations

The LCCX2/0-12-X is the direct equivalent substitute for the obsolete LCCX2/0-12H-X. Both parts share identical electrical and mechanical specifications across all critical parameters: wire gauge, stud size, terminal configuration, contact material, contact finish, and barrel dimensions.

Product Status Consideration: The LCCX2/0-12H-X is classified as obsolete, while the LCCX2/0-12-X maintains active product status. For new designs and ongoing production, the LCCX2/0-12-X is the appropriate selection to ensure long-term component availability and manufacturer support.

Mounting Configuration Difference: The primary distinction is the mounting type. The main part features a 45° angle configuration, while the substitute provides free hanging (in-line) mounting without angular offset. This difference affects physical installation geometry but does not impact electrical performance or functional compatibility with the 1/2 stud interface.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory continuity for applications subject to environmental and hazardous substance restrictions.

Inventory Availability: Both parts are available in new original condition with comparable stock levels, supporting immediate procurement for replacement and new assembly requirements.

Frequently Asked Questions (FAQ)

Q: Can the LCCX2/0-12-X directly replace the LCCX2/0-12H-X in existing assemblies?

A: The LCCX2/0-12-X is electrically and mechanically equivalent to the LCCX2/0-12H-X across all critical parameters. The primary difference is the mounting configuration: the main part includes a 45° angle offset, while the substitute provides in-line mounting. Compatibility depends on the specific mounting geometry requirements of the application. If the 45° angle is essential to the assembly design, the mounting configuration difference must be evaluated against the application's physical constraints.

Q: Are the barrel dimensions identical between these two parts?

A: Yes. Both parts feature identical barrel specifications: inner diameter (ID) of 0.510" (12.95mm), outer diameter (OD) of 0.640" (16.26mm), and ring inner diameter (ID) of 0.530" (13.46mm). These dimensions ensure equivalent wire termination and stud connection performance.

Q: Do both parts support the same wire gauge and stud size?

A: Yes. Both the LCCX2/0-12H-X and LCCX2/0-12-X are rated for 2/0 AWG wire termination with a 1/2 stud connection. The terminal style, featuring two stud holes, is identical in both parts.

Q: What is the significance of the product status difference?

A: The LCCX2/0-12H-X is classified as obsolete, indicating that Panduit Corp no longer actively manufactures or supports this part. The LCCX2/0-12-X maintains active product status, ensuring ongoing availability, manufacturer technical support, and compliance with current manufacturing standards. For new designs and long-term applications, the active part is the recommended selection.

Q: Are the contact material and finish specifications the same?

A: Yes. Both parts use copper as the contact material with electro-tin finish, providing equivalent electrical conductivity and corrosion resistance characteristics.

Q: What is the difference in overall length between these parts?

A: The LCCX2/0-12H-X does not specify an overall length dimension. The LCCX2/0-12-X specifies an overall length of 4.870" (123.70mm). This dimension reflects the in-line mounting configuration without angular offset.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the LCCX2/0-12H-X and LCCX2/0-12-X are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance regulations.

Q: What termination method is used for both parts?

A: Both parts utilize crimp and barrel termination methods, ensuring compatibility with standard terminal crimping equipment and assembly procedures.

Q: Is the packaging different between these two parts?

A: The LCCX2/0-12H-X packaging is not specified in the available data. The LCCX2/0-12-X is supplied in bulk packaging. Specific packaging requirements should be confirmed with the supplier based on application needs.