LCCX1/0-12H-X Equivalent & Substitute Parts

Part Overview

The LCCX1/0-12H-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1/0 AWG wire gauge applications with a 1/2 stud connection. This non-insulated copper terminal features electro-tin contact finish and is rated for crimp barrel termination. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure component availability for new designs and field replacements.

Substiute Parts

LCCX1/0-12H-X

Panduit CorpIn Stock: 856LCCX1/0-12H-X Datasheet

Current PartRFQ

LCCX1/0-12-X

Panduit CorpIn Stock: 1083LCCX1/0-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCCX1/0-12H-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: The substitute part must support 1/0 AWG wire gauge to ensure proper current-carrying capacity and mechanical fit within the crimp barrel.

Stud/Tab Size: The 1/2 stud connection is a fixed mechanical interface requirement. Substitute parts must maintain this dimension for mounting compatibility.

Terminal Type and Style: Rectangular tongue configuration with two stud holes must be preserved to ensure functional equivalence in circuit board or panel mounting applications.

Termination Method: Crimp barrel termination is the specified connection method. Substitute parts must employ identical termination technology.

Contact Material and Finish: Copper base material with electro-tin finish ensures electrical conductivity and corrosion resistance. These specifications must remain constant.

Mechanical Dimensions: Barrel ID, barrel OD, ring ID, tab thickness, and outer width dimensions must match to guarantee mechanical interchangeability.

Compliance Standards: RoHS3 compliance is mandatory for regulatory equivalence.

The LCCX1/0-12-X meets all these criteria and is identified as the direct substitute for the obsolete LCCX1/0-12H-X.

Parameter Comparison

Engineering Selection Recommendations

The LCCX1/0-12-X is the direct equivalent substitute for the obsolete LCCX1/0-12H-X. Both parts share identical electrical and mechanical specifications across all critical parameters including wire gauge, stud size, terminal configuration, termination method, contact material, and finish.

Product Status Advantage: The LCCX1/0-12-X maintains active product status with Panduit Corp, ensuring continued availability and supply chain reliability. The main part LCCX1/0-12H-X is classified as obsolete and should not be specified for new designs.

Compliance Certification: Both parts maintain ROHS3 compliance, satisfying regulatory requirements for electronic component applications.

Inventory Availability: The substitute part LCCX1/0-12-X is available in bulk packaging with 993 pieces in stock, compared to 832 pieces of the obsolete variant.

Mounting Configuration: The substitute part specifies free hanging in-line mounting without the 45° angle designation of the main part. This represents a functional simplification while maintaining mechanical interchangeability in standard mounting applications.

For all new component selections and field replacements, the LCCX1/0-12-X should be specified in place of the LCCX1/0-12H-X.

Frequently Asked Questions (FAQ)

Q: Can the LCCX1/0-12-X be used as a direct replacement for the LCCX1/0-12H-X?

A: Yes. The LCCX1/0-12-X is a direct equivalent substitute. All electrical and mechanical parameters are identical, including wire gauge (1/0 AWG), stud size (1/2), terminal type (rectangular tongue), termination method (crimp barrel), contact material (copper), and contact finish (electro-tin). The substitute part is currently active and available from Panduit Corp.

Q: What is the difference between the mounting types listed for these parts?

A: The main part LCCX1/0-12H-X specifies free hanging in-line mounting with a 45° angle option. The substitute LCCX1/0-12-X specifies free hanging in-line mounting without the angle designation. Both configurations are mechanically compatible for standard mounting applications. The 45° angle specification on the obsolete part does not affect functional equivalence.

Q: Are there any compliance or certification differences between these parts?

A: No. Both the LCCX1/0-12H-X and LCCX1/0-12-X maintain ROHS3 compliance. Both parts carry identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Q: What packaging options are available for the substitute part?

A: The LCCX1/0-12-X is supplied in bulk packaging. The obsolete LCCX1/0-12H-X packaging specification was not provided in the available data.

Q: Why should I select the LCCX1/0-12-X over the obsolete LCCX1/0-12H-X?

A: The LCCX1/0-12-X is the active product offering from Panduit Corp. Specifying active products ensures supply chain continuity, eliminates obsolescence risk, and guarantees long-term component availability. The obsolete LCCX1/0-12H-X should not be specified for new designs or applications.

Q: Are the barrel dimensions identical between these parts?

A: Yes. Both parts have identical barrel specifications: barrel ID of 0.450" (11.43mm), barrel OD of 0.580" (14.73mm), and ring ID of 0.530" (13.46mm). These dimensions ensure mechanical interchangeability in crimp barrel termination applications.

Q: What wire gauge range does the 1/0 AWG specification cover?

A: The 1/0 AWG specification is fixed for both parts. This wire gauge is not a range but a specific conductor size. Both the LCCX1/0-12H-X and LCCX1/0-12-X are designed exclusively for 1/0 AWG wire termination.