LCCX1/0-12F-X Equivalent & Substitute Parts

Part Overview

The LCCX1/0-12F-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1/0 AWG wire gauge applications with a 1/2 stud connection. This component is classified as obsolete, indicating discontinuation from active production. The terminal features a non-insulated copper construction with electro-tin contact finish, suitable for crimp barrel termination in free-hanging and right-angle mounting configurations. Due to its obsolete status, identifying equivalent substitute parts is necessary to maintain system compatibility and ensure continued availability for replacement and maintenance applications.

Substiute Parts

LCCX1/0-12F-X

Panduit CorpIn Stock: 1105LCCX1/0-12F-X Datasheet

Current PartRFQ

LCCX1/0-12-X

Panduit CorpIn Stock: 1083LCCX1/0-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCCX1/0-12F-X is determined by strict equivalence across electrical and mechanical parameters. The primary substitute, LCCX1/0-12-X, maintains identical specifications for wire gauge (1/0 AWG), stud size (1/2), terminal type (rectangular tongue), termination method (crimp barrel), and all critical dimensional parameters including barrel ID, barrel OD, ring ID, and tab thickness. Both components share the same contact material (copper), contact finish (electro-tin), and insulation classification (non-insulated).

The key differentiating factors between the main part and its substitute are:

• Product Status: LCCX1/0-12F-X is obsolete; LCCX1/0-12-X is active
• Mounting Type: LCCX1/0-12F-X supports free-hanging (in-line) and right-angle configurations; LCCX1/0-12-X supports free-hanging (in-line) only
• Packaging: LCCX1/0-12F-X packaging not specified; LCCX1/0-12-X supplied in bulk
• Overall Length: LCCX1/0-12F-X length not specified; LCCX1/0-12-X measures 4.830" (122.68mm)

All regulatory compliance parameters (RoHS3, REACH Unaffected, EAR99 ECCN) remain consistent across both parts.

Parameter Comparison

Engineering Selection Recommendations

The LCCX1/0-12-X serves as the direct substitute for the obsolete LCCX1/0-12F-X based on complete electrical and mechanical parameter equivalence. The substitute part maintains active product status with Panduit Corp, ensuring ongoing availability and supply chain continuity.

Selection of LCCX1/0-12-X is supported by:

• Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and safety requirements
• Electrical Equivalence: Identical wire gauge (1/0 AWG), barrel dimensions, and ring ID specifications ensure equivalent electrical performance
• Mechanical Compatibility: Matching stud size (1/2), tab thickness (0.130"), and terminal geometry provide direct mechanical interchangeability
• Material Consistency: Copper construction with electro-tin finish ensures equivalent corrosion resistance and conductivity characteristics
• Active Status: LCCX1/0-12-X active product status provides long-term availability compared to the obsolete LCCX1/0-12F-X

The primary consideration is mounting configuration: LCCX1/0-12F-X supports both free-hanging (in-line) and right-angle mounting, while LCCX1/0-12-X supports free-hanging (in-line) only. Applications requiring right-angle mounting must evaluate this limitation against system design requirements.

Frequently Asked Questions (FAQ)

Q: Can LCCX1/0-12-X directly replace LCCX1/0-12F-X in all applications?

A: LCCX1/0-12-X provides direct electrical and mechanical substitution for LCCX1/0-12F-X with one exception: mounting configuration. LCCX1/0-12F-X supports both free-hanging (in-line) and right-angle mounting, while LCCX1/0-12-X supports free-hanging (in-line) only. Applications using right-angle mounting must confirm compatibility with the in-line configuration of the substitute part.

Q: What wire gauge does the LCCX1/0-12-X accommodate?

A: The LCCX1/0-12-X is rated for 1/0 AWG wire gauge, identical to the LCCX1/0-12F-X. Both parts feature a barrel ID of 0.450" (11.43mm) and barrel OD of 0.580" (14.73mm) for this wire gauge specification.

Q: Are the stud sizes identical between the main part and substitute?

A: Yes. Both LCCX1/0-12F-X and LCCX1/0-12-X feature a 1/2 stud size with matching tab thickness of 0.130" (3.30mm) and ring ID of 0.530" (13.46mm), ensuring direct mechanical compatibility.

Q: What is the difference in packaging between these parts?

A: LCCX1/0-12F-X packaging is not specified in available documentation. LCCX1/0-12-X is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: Do both parts meet current regulatory standards?

A: Yes. Both LCCX1/0-12F-X and LCCX1/0-12-X are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Both parts satisfy current environmental and safety regulatory requirements.

Q: Why is LCCX1/0-12F-X listed as obsolete?

A: LCCX1/0-12F-X has been discontinued from active production by Panduit Corp. LCCX1/0-12-X remains in active production and serves as the current equivalent offering for new designs and replacement applications.

Q: Are the contact materials and finishes the same?

A: Yes. Both parts feature copper contact material with electro-tin finish, providing identical electrical conductivity and corrosion resistance characteristics.