LCCH2/0-12-X Equivalent & Substitute Parts

Part Overview

The LCCH2/0-12-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire applications with a 1/2 inch stud connection. This component is part of the Pan-Lug™ series and features a crimp barrel termination method with electro-tin contact finish on copper material. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure procurement of components with current manufacturer support and availability.

Substiute Parts

LCCH2/0-12-X

Panduit CorpIn Stock: 1009LCCH2/0-12-X Datasheet

Current PartRFQ

LCC2/0-12-X

Panduit CorpIn Stock: 887LCC2/0-12-X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The LCC2/0-12-X serves as a direct functional equivalent to the LCCH2/0-12-X based on alignment across all critical electrical and mechanical parameters. Substitution eligibility is determined by the following parameters:

Wire Gauge Compatibility: Both parts accommodate 2/0 AWG wire, establishing baseline electrical compatibility.

Stud/Tab Size Matching: Both components feature a 1/2 inch stud connection, ensuring mechanical fit within existing mounting infrastructure.

Terminal Geometry: Identical rectangular tongue terminal type with two stud holes and matching dimensional specifications (tab thickness 0.130", overall length 4.980", outer width 0.850") confirm physical interchangeability.

Termination Method: Both parts utilize crimp barrel termination, allowing use of identical tooling and installation procedures.

Contact Properties: Copper material with electro-tin finish is consistent across both parts, maintaining electrical performance and corrosion resistance characteristics.

Regulatory Compliance: Both components meet ROHS3 compliance requirements, satisfying environmental and regulatory standards.

The primary distinction between these parts is product status: the LCCH2/0-12-X is obsolete, while the LCC2/0-12-X maintains active status with current manufacturer support.

Parameter Comparison

Engineering Selection Recommendations

The LCC2/0-12-X is the appropriate selection for applications currently specified with LCCH2/0-12-X components. This substitution is based on the following engineering criteria:

Functional Equivalence: All electrical and mechanical parameters align between the main part and substitute, confirming direct interchangeability without design modification.

Product Status: The LCC2/0-12-X maintains active product status with current manufacturer support, ensuring ongoing availability, technical documentation, and supply chain reliability. The obsolete status of LCCH2/0-12-X creates procurement risk and limits access to manufacturer resources.

Regulatory Compliance: Both components satisfy ROHS3 compliance requirements. The LCC2/0-12-X additionally carries REACH Unaffected status, providing expanded regulatory coverage for international applications.

Packaging Consideration: The LCC2/0-12-X is supplied in bulk packaging, which may require evaluation against existing procurement and inventory management procedures.

Frequently Asked Questions (FAQ)

Q: Can LCC2/0-12-X be used as a direct replacement for LCCH2/0-12-X?

A: Yes. The LCC2/0-12-X is a direct functional equivalent. All critical electrical and mechanical parameters are identical, including wire gauge (2/0 AWG), stud size (1/2 inch), terminal geometry, termination method, and contact properties. No design or installation modifications are required.

Q: What is the primary reason for substitution?

A: The LCCH2/0-12-X is classified as obsolete, while the LCC2/0-12-X maintains active product status. This substitution ensures access to components with current manufacturer support and reliable supply chain availability.

Q: Are the dimensional specifications identical?

A: Yes. Both parts share identical dimensional specifications: tab thickness 0.130" (3.30mm), overall length 4.980" (126.49mm), and outer width 0.850" (21.59mm). Physical interchangeability is confirmed.

Q: Do both parts use the same termination method?

A: Yes. Both components utilize crimp barrel termination, allowing use of identical crimping tools and installation procedures.

Q: What is the difference in packaging between these parts?

A: The LCCH2/0-12-X packaging specification is not provided in available documentation. The LCC2/0-12-X is supplied in bulk packaging. Packaging requirements should be evaluated against procurement specifications.

Q: Are regulatory compliance standards equivalent?

A: Both parts meet ROHS3 compliance. The LCC2/0-12-X additionally carries REACH Unaffected status. For applications requiring specific regulatory certifications, compliance documentation should be reviewed.

Q: What contact material and finish are used?

A: Both parts feature copper material with electro-tin contact finish, providing equivalent electrical conductivity and corrosion resistance characteristics.