LCCF4-38DF-L Equivalent & Substitute Parts

Part Overview

The LCCF4-38DF-L is a terminal connector rectangular wire management component manufactured by Panduit Corp. This part is classified as obsolete and is no longer in active production. Due to its obsolete status, locating original inventory becomes increasingly difficult. The substitute part LCCX4-38D-L provides functional equivalence for applications requiring terminal connector rectangular configurations with matching electrical and mechanical specifications.

Substiute Parts

LCCF4-38DF-L

Panduit CorpIn Stock: 942LCCF4-38DF-L Datasheet

Current PartRFQ

LCCX4-38D-L

Panduit CorpIn Stock: 1033LCCX4-38D-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The LCCX4-38D-L qualifies as a direct substitute for the LCCF4-38DF-L based on the following critical parameters:

Matching Specifications:

• Manufacturer: Panduit Corp (same manufacturer ensures design compatibility)
• Terminal Type: Rectangular Tongue configuration
• Wire Gauge: 4 AWG (identical conductor size)
• Stud/Tab Size: 3/8 Stud (matching connection interface)
• Termination Method: Crimp, Barrel (compatible installation process)
• Contact Material: Copper (same electrical properties)
• Contact Finish: Electro-Tin (equivalent surface treatment)

The LCCX4-38D-L is an active product within the Pan-Lug™ series, providing current availability and ongoing manufacturer support compared to the obsolete LCCF4-38DF-L.

Parameter Comparison

Engineering Selection Recommendations

For New Designs and Replacements:

The LCCX4-38D-L is the appropriate selection for applications previously specified with LCCF4-38DF-L. The substitute part maintains the same manufacturer lineage and terminal connector rectangular classification. The LCCX4-38D-L carries active product status with ROHS3 compliance and REACH unaffected designation, supporting current regulatory requirements.

Inventory Considerations:

The LCCF4-38DF-L remains available with 906 pieces in current stock. However, the LCCX4-38D-L offers superior long-term availability with 1,014 pieces in inventory and active production status through the Pan-Lug™ series.

Compliance Status:

The LCCX4-38D-L meets ROHS3 compliance requirements and maintains REACH unaffected status, aligning with modern environmental and regulatory standards. The LCCF4-38DF-L compliance information is not specified due to its obsolete classification.

Frequently Asked Questions (FAQ)

Q: Can LCCX4-38D-L directly replace LCCF4-38DF-L in existing assemblies?

A: Yes. Both components are manufactured by Panduit Corp and share the same terminal connector rectangular configuration with matching 4 AWG wire gauge and 3/8 stud specifications. The crimp barrel termination method is identical between both parts.

Q: What is the primary advantage of selecting LCCX4-38D-L over LCCF4-38DF-L?

A: The LCCX4-38D-L carries active product status with ongoing manufacturer support and production, whereas LCCF4-38DF-L is obsolete. The LCCX4-38D-L also provides ROHS3 compliance certification.

Q: Are there packaging differences between these parts?

A: The LCCF4-38DF-L packaging specification is not provided. The LCCX4-38D-L is supplied in bulk packaging format.

Q: Do both parts have identical mechanical dimensions?

A: The LCCF4-38DF-L detailed dimensions are not specified in the available data. The LCCX4-38D-L provides the following dimensions: Overall Length 3.090" (78.49mm), Outer Width 0.620" (15.75mm), Tab Thickness 0.080" (2.03mm), Barrel ID 0.280" (7.11mm), Barrel OD 0.380" (9.65mm), and Ring ID 0.410" (10.41mm).

Q: What is the contact material composition?

A: Both parts utilize copper contact material with electro-tin finish for equivalent electrical conductivity and corrosion resistance.

Q: Are moisture sensitivity considerations applicable to these terminals?

A: Moisture Sensitivity Level is not applicable to both LCCF4-38DF-L and LCCX4-38D-L, indicating these components do not require special moisture control during storage or handling.