LCC6-14EWH-L Equivalent & Substitute Parts

Part Overview

The LCC6-14EWH-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 6 AWG wire termination on 1/4" studs. This component is classified as a Pan-Lug™ series terminal with crimp barrel termination and electro-tin contact finish. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCC6-14EWH-L

Panduit CorpIn Stock: 1167LCC6-14EWH-L Datasheet

Current PartRFQ

LCC6-14EW-L

Panduit CorpIn Stock: 991LCC6-14EW-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCC6-14EWH-L is determined by strict equivalence across the following critical parameters:

Wire gauge compatibility (6 AWG) ensures proper current-carrying capacity and barrel crimp dimensions. The 1/4" stud size establishes mechanical fit on the mating connection point. Rectangular tongue terminal type and two stud hole configuration define the physical form factor. Crimp barrel termination method and identical barrel dimensions (0.220" ID, 0.310" OD) ensure compatibility with standard 6 AWG crimping tools and wire attachment processes. Tab thickness (0.080"), ring ID (0.270"), and contact material (copper with electro-tin finish) maintain electrical performance and corrosion resistance characteristics.

The substitute part LCC6-14EWH-L must match all these parameters without deviation. Product status differences (obsolete versus active) do not affect electrical or mechanical compatibility but indicate supply availability.

Parameter Comparison

Engineering Selection Recommendations

The LCC6-14EW-L is a direct functional equivalent to the LCC6-14EWH-L. All critical electrical and mechanical parameters are identical, including wire gauge, stud size, barrel dimensions, contact material, and contact finish. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for equivalent component selection.

The primary distinction is product status: LCC6-14EWH-L is obsolete while LCC6-14EW-L is active. This status difference reflects manufacturing availability rather than technical capability. The substitute part is suitable for direct replacement in applications currently specified for the main part number.

Mounting type specification shows a minor difference: the main part lists "Free Hanging (In-Line), 45° Angle" while the substitute lists "Free Hanging (In-Line)" without angle specification. This difference does not affect electrical or mechanical compatibility for standard terminal applications. The overall length is specified for the substitute part (3.110") but not provided for the main part, indicating data documentation variance rather than functional incompatibility.

Frequently Asked Questions (FAQ)

Q: Can LCC6-14EW-L replace LCC6-14EWH-L in existing applications?

A: Yes. The LCC6-14EW-L is electrically and mechanically equivalent to the LCC6-14EWH-L. All critical parameters including wire gauge (6 AWG), stud size (1/4"), barrel dimensions, contact material, and contact finish are identical. The substitute part is suitable for direct replacement.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. LCC6-14EWH-L is obsolete, while LCC6-14EW-L is active. The mounting type specification differs slightly (45° angle noted for the main part but not the substitute), though both are free-hanging in-line configurations. The substitute part has documented overall length (3.110"), while the main part does not.

Q: Are both parts ROHS3 compliant?

A: Yes. Both LCC6-14EWH-L and LCC6-14EW-L are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

Q: What wire gauge does this terminal accommodate?

A: Both parts are rated for 6 AWG wire. The barrel dimensions (0.220" ID, 0.310" OD) are sized specifically for 6 AWG crimp termination.

Q: What is the stud size for these terminals?

A: Both terminals are designed for 1/4" studs. The ring ID of 0.270" accommodates standard 1/4" stud connections.

Q: Can these terminals be used in high-temperature applications?

A: The provided specifications do not include temperature rating data. Consult detailed product datasheets for thermal performance characteristics.

Q: What is the contact finish material?

A: Both parts feature electro-tin contact finish on copper base material, providing corrosion resistance and reliable electrical conductivity.

Q: Are these terminals insulated?

A: No. Both LCC6-14EWH-L and LCC6-14EW-L are non-insulated terminals. Insulation must be provided separately if required by the application.

Q: What termination method is used?

A: Both terminals use crimp barrel termination. Standard 6 AWG crimping tools are compatible with the barrel dimensions specified.