LCC6-14EWF-L Equivalent & Substitute Parts

Part Overview

The LCC6-14EWF-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 6 AWG wire termination on 1/4 inch studs. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing procurement and system maintenance. The terminal features a two-stud hole configuration with crimp barrel termination and non-insulated copper construction with electro-tin contact finish.

Substiute Parts

LCC6-14EWF-L

Panduit CorpIn Stock: 947LCC6-14EWF-L Datasheet

Current PartRFQ

LCC6-14EW-L

Panduit CorpIn Stock: 991LCC6-14EW-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCC6-14EWF-L is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: 6 AWG termination capacity is the primary electrical parameter defining functional interchangeability.

Stud/Tab Size: 1/4 inch stud dimension is the mechanical interface requirement that must remain constant.

Terminal Type and Style: Rectangular tongue configuration with two stud holes defines the physical form factor and mounting interface.

Termination Method: Crimp barrel termination establishes the wire attachment mechanism.

Electrical Properties: Contact material (copper), contact finish (electro-tin), barrel dimensions (ID 0.220", OD 0.310"), and ring ID (0.270") establish electrical performance and current-carrying capacity.

Compliance Requirements: RoHS3 compliance and REACH unaffected status must be maintained.

The LCC6-14EW-L meets all these criteria and is identified as a direct substitute. The primary distinction is product status (active versus obsolete) and packaging configuration (bulk versus original packaging).

Parameter Comparison

Engineering Selection Recommendations

The LCC6-14EW-L is the direct equivalent substitute for the obsolete LCC6-14EWF-L. Both components are manufactured by Panduit Corp within the Pan-Lug™ series and maintain identical electrical and mechanical specifications across all critical parameters.

Product Status Consideration: The LCC6-14EW-L carries active product status, ensuring continued availability and manufacturing support. The LCC6-14EWF-L is classified as obsolete, indicating discontinued production and limited future procurement viability.

Compliance Alignment: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current applications.

Functional Equivalence: Identical wire gauge (6 AWG), stud size (1/4 inch), terminal configuration, termination method, and electrical properties establish complete functional interchangeability for all applications currently utilizing the LCC6-14EWF-L.

Packaging Difference: The substitute part is supplied in bulk packaging, whereas the main part was supplied in original packaging. This distinction affects inventory management and handling procedures but does not impact component performance or compatibility.

Frequently Asked Questions (FAQ)

Q: Can the LCC6-14EW-L be used as a direct replacement for the LCC6-14EWF-L?

A: Yes. The LCC6-14EW-L is a direct functional equivalent. Both components share identical wire gauge (6 AWG), stud size (1/4 inch), terminal type (rectangular tongue with two stud holes), termination method (crimp barrel), and all electrical specifications including contact material, finish, and barrel dimensions.

Q: What is the primary reason for substitution?

A: The LCC6-14EWF-L is classified as obsolete, indicating discontinued production. The LCC6-14EW-L maintains active product status and ensures ongoing availability for procurement and system maintenance.

Q: Are there any mechanical compatibility issues between these parts?

A: No. Both components maintain identical mechanical specifications: tab thickness (0.080"), outer width (0.480"), barrel ID (0.220"), barrel OD (0.310"), and ring ID (0.270"). They are mechanically interchangeable in all mounting and termination applications.

Q: Does the packaging difference affect component performance?

A: No. The packaging difference (original versus bulk) affects only inventory handling and storage procedures. Component performance, electrical properties, and mechanical function remain identical.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the LCC6-14EWF-L and LCC6-14EW-L are ROHS3 compliant and REACH unaffected, satisfying current regulatory requirements.

Q: What wire gauge does this terminal accommodate?

A: Both components are rated for 6 AWG wire termination.

Q: What stud size is required for installation?

A: Both components are designed for 1/4 inch stud mounting.