LCC3/0-38DWH-X Equivalent & Substitute Parts

Part Overview

The LCC3/0-38DWH-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 3/0 AWG wire termination on a 3/8" stud. This component features a two-stud hole configuration with electro-tin plated copper contact material and non-insulated construction. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and system maintenance.

Key Parameters

Parameter	Value
Wire Gauge	3/0 AWG
Stud/Tab Size	3/8 Stud
Terminal Type	Rectangular Tongue
Terminal Style	Two Stud Holes
Termination Method	Crimp, Barrel
Tab Thickness	0.130" (3.30mm)
Barrel ID	0.510" (12.95mm)
Barrel OD	0.640" (16.26mm)
Contact Material	Copper
Contact Finish	Electro-Tin
Insulation	Non-Insulated
Color	Orange
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the LCC3/0-38DWH-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate 3/0 AWG wire termination.

Stud/Tab Size Compatibility: The substitute part must interface with a 3/8" stud mounting point.

Barrel Dimensions: The substitute part must maintain identical barrel inner diameter (0.510") and outer diameter (0.640") to ensure proper crimp formation and mechanical fit.

Termination Method: The substitute part must utilize crimp and barrel termination technology.

Contact Material and Finish: The substitute part must use copper with electro-tin plating to maintain electrical performance and corrosion resistance.

Tab Thickness: The substitute part must maintain 0.130" (3.30mm) tab thickness for structural integrity and mounting compatibility.

Compliance Standards: The substitute part must maintain ROHS3 compliance and REACH unaffected status.

The LCC3/0-38DW-X meets all substitution criteria while offering active product status, making it a direct functional equivalent.

Parameter Comparison

Parameter	LCC3/0-38DWH-X (Main Part)	LCC3/0-38DW-X (Substitute)
Manufacturer	Panduit Corp	Panduit Corp
Series	Pan-Lug™	Pan-Lug™
Product Status	Obsolete	Active
Wire Gauge	3/0 AWG	3/0 AWG
Stud/Tab Size	3/8 Stud	3/8 Stud
Terminal Style	Two Stud Holes	Two Stud Holes
Tab Thickness	0.130" (3.30mm)	0.130" (3.30mm)
Width - Outer Edges	0.960" (24.38mm)	0.960" (24.38mm)
Termination	Crimp, Barrel	Crimp, Barrel
Insulation	Non-Insulated	Non-Insulated
Color	Orange	Orange
Contact Finish	Electro-Tin	Electro-Tin
Contact Material	Copper	Copper
Barrel ID	0.510" (12.95mm)	0.510" (12.95mm)
Barrel OD	0.640" (16.26mm)	0.640" (16.26mm)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

The LCC3/0-38DW-X is the direct substitute for the obsolete LCC3/0-38DWH-X. Both components share identical electrical and mechanical specifications across all critical parameters, including wire gauge, stud size, barrel dimensions, contact material, and finish specifications. The substitute part maintains full ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment with the original component.

The primary distinction between the two parts is product status: the LCC3/0-38DWH-X is obsolete, while the LCC3/0-38DW-X is active and available in production quantities. The substitute part is suitable for direct replacement in applications requiring 3/0 AWG rectangular lug terminals with 3/8" stud mounting.

Frequently Asked Questions (FAQ)

Q: Can the LCC3/0-38DW-X directly replace the LCC3/0-38DWH-X in existing applications?

A: Yes. Both parts share identical wire gauge (3/0 AWG), stud size (3/8"), barrel dimensions, tab thickness, contact material, and contact finish specifications. The electrical and mechanical performance characteristics are equivalent.

Q: What is the difference between the terminal types listed for these parts?

A: The LCC3/0-38DWH-X is designated as a rectangular tongue terminal, while the LCC3/0-38DW-X is designated as a lug, grounding terminal. Both maintain identical dimensional and electrical specifications for the 3/0 AWG wire gauge and 3/8" stud interface. The functional performance in applications requiring 3/0 AWG termination on 3/8" studs remains equivalent.

Q: Are there packaging differences between these parts?

A: The LCC3/0-38DWH-X is supplied in standard packaging, while the LCC3/0-38DW-X is supplied in bulk packaging. Both parts are identical in electrical and mechanical specifications.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both the LCC3/0-38DWH-X and LCC3/0-38DW-X are ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic component procurement.

Q: What is the mounting configuration for these terminals?

A: The LCC3/0-38DWH-X features free hanging (in-line) mounting with a 45° angle configuration. The LCC3/0-38DW-X features free hanging (in-line) mounting without angle specification. Both accommodate two stud holes for secure fastening to 3/8" studs.

Q: Are the crimp barrel specifications identical between these parts?

A: Yes. Both parts maintain identical barrel inner diameter (0.510") and outer diameter (0.640"), ensuring compatibility with standard 3/0 AWG crimp tooling and procedures.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message