LCC300-12F-X Equivalent & Substitute Parts

Part Overview

The LCC300-12F-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 300MCM (kcmil) wire gauge applications with a 1/2 stud configuration. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and ensure project feasibility. The terminal features a two stud hole design with electro-tin contact finish and copper contact material, suitable for crimp barrel termination in non-insulated applications.

Substiute Parts

LCC300-12F-X

Panduit CorpIn Stock: 669LCC300-12F-X Datasheet

Current PartRFQ

LCC300-12-X

Panduit CorpIn Stock: 798LCC300-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCC300-12F-X is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Wire Gauge: 300MCM (kcmil)
• Stud/Tab Size: 1/2 Stud
• Terminal Type: Rectangular Tongue
• Terminal Style: Two Stud Holes
• Termination Method: Crimp, Barrel
• Contact Material: Copper
• Contact Finish: Electro-Tin
• Tab Thickness: 0.160" (4.06mm)
• Barrel ID: 0.650" (16.51mm)
• Barrel OD: 0.810" (20.57mm)
• Ring ID: 0.530" (13.46mm)
• Width - Outer Edges: 1.190" (30.23mm)
• Insulation: Non-Insulated
• Series: Pan-Lug™
• Manufacturer: Panduit Corp

The substitute part LCC300-12-X meets all mandatory matching parameters and is classified as an active product, providing functional equivalence with improved supply availability.

Parameter Comparison

Engineering Selection Recommendations

The LCC300-12-X is the direct functional equivalent for the obsolete LCC300-12F-X. Both components share identical electrical and mechanical specifications across all critical parameters, including wire gauge, stud size, terminal geometry, and contact characteristics. The LCC300-12-X maintains active product status with Panduit Corp, ensuring ongoing availability and supply chain reliability.

Both parts satisfy ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement. The transition from LCC300-12F-X to LCC300-12-X presents no technical impediment to circuit or assembly design, as all functional parameters remain constant.

The primary distinction between the two parts is the mounting type specification: the LCC300-12F-X includes a right angle mounting option, while the LCC300-12-X specifies free hanging in-line mounting only. This difference must be evaluated against specific application requirements to determine suitability for the intended installation configuration.

Frequently Asked Questions (FAQ)

Q: Can LCC300-12-X be used as a direct replacement for LCC300-12F-X?

A: The LCC300-12-X is functionally equivalent across all electrical and mechanical parameters. Compatibility depends on the mounting configuration required by the application. If right angle mounting is essential, the mounting type difference must be addressed in the design.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution eligibility is determined by equivalence in wire gauge (300MCM), stud size (1/2), terminal type (rectangular tongue), terminal style (two stud holes), termination method (crimp barrel), contact material and finish (copper with electro-tin), and all dimensional specifications including tab thickness, barrel dimensions, and ring ID.

Q: Are there compliance differences between the two parts?

A: Both LCC300-12F-X and LCC300-12-X maintain identical RoHS3 compliance, REACH unaffected status, ECCN classification (EAR99), and HTSUS code (8536.90.4000). No compliance barriers exist for substitution.

Q: What is the significance of the product status difference?

A: The LCC300-12F-X is classified as obsolete, indicating discontinued manufacturing and limited availability. The LCC300-12-X is active, ensuring continued production and reliable supply for new projects and ongoing procurement requirements.

Q: How does packaging differ between these parts?

A: The LCC300-12F-X packaging specification is not provided in the available data. The LCC300-12-X is supplied in bulk packaging. Specific packaging requirements should be confirmed with the supplier for procurement planning.

Q: Are there inventory considerations for component selection?

A: Current inventory levels show 653 pieces of LCC300-12F-X and 778 pieces of LCC300-12-X available. Inventory status is subject to change and should be confirmed at the time of procurement.