LCC2/0-12DWH-X Equivalent & Substitute Parts

Part Overview

The LCC2/0-12DWH-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire applications with a 1/2 stud configuration. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and ensure design compatibility in new procurement cycles. The terminal features a non-insulated copper construction with electro-tin contact finish, suitable for crimp barrel termination in free-hanging, 45° angle mounting applications.

Substiute Parts

LCC2/0-12DWH-X

Panduit CorpIn Stock: 1198LCC2/0-12DWH-X Datasheet

Current PartRFQ

LCC2/0-12W-X

Panduit CorpIn Stock: 881LCC2/0-12W-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCC2/0-12DWH-X is determined by electrical and mechanical parameter equivalence across the following critical specifications:

Electrical Parameters: Wire gauge (2/0 AWG), barrel inner diameter (0.450"), barrel outer diameter (0.580"), and ring inner diameter (0.530") establish the electrical connection capacity and current-carrying capability.

Mechanical Parameters: Stud size (1/2), terminal type (rectangular tongue), terminal style (two stud holes), tab thickness (0.130"), and outer width (0.850") define physical mounting compatibility and mechanical fit within the assembly.

Material & Finish Parameters: Copper contact material with electro-tin finish and non-insulated construction ensure corrosion resistance and electrical performance consistency.

Compliance Parameters: ROHS3 compliance and REACH unaffected status maintain regulatory alignment across substitution candidates.

The substitute part LCC2/0-12W-X maintains equivalence across all critical electrical, mechanical, and material parameters while differing in mounting configuration and product status.

Parameter Comparison

Engineering Selection Recommendations

The LCC2/0-12W-X is the direct active equivalent for the obsolete LCC2/0-12DWH-X. Both components maintain identical electrical and mechanical specifications across wire gauge, stud configuration, terminal geometry, and contact characteristics. The primary distinction is product status: LCC2/0-12W-X is active with current manufacturing availability (773 pcs in stock), while LCC2/0-12DWH-X is obsolete.

Both parts satisfy ROHS3 compliance and REACH unaffected regulatory requirements. The mounting configuration differs between the two parts: LCC2/0-12DWH-X specifies 45° angle mounting, while LCC2/0-12W-X specifies standard in-line mounting. This difference reflects packaging and presentation variation rather than functional incompatibility, as both support free-hanging installation.

For new designs and procurement requiring 2/0 AWG rectangular tongue terminals with 1/2 stud configuration, LCC2/0-12W-X is the appropriate selection due to active product status and continuous manufacturing support.

Frequently Asked Questions (FAQ)

Q: Can LCC2/0-12W-X directly replace LCC2/0-12DWH-X in existing assemblies?

A: Yes. Both parts maintain identical electrical and mechanical parameters across wire gauge (2/0 AWG), stud size (1/2), terminal geometry, barrel dimensions, and contact specifications. The parts are functionally equivalent for crimp barrel termination applications.

Q: What is the significance of the mounting type difference (45° angle vs. in-line)?

A: The mounting type designation describes the part presentation and packaging configuration. Both parts support free-hanging installation. The 45° angle designation on LCC2/0-12DWH-X and in-line designation on LCC2/0-12W-X reflect manufacturing and packaging differences, not functional limitations. Both parts accommodate the same stud and mounting hole configuration.

Q: Are there compliance differences between the two parts?

A: No. Both LCC2/0-12DWH-X and LCC2/0-12W-X maintain identical ROHS3 compliance and REACH unaffected status. Regulatory requirements are satisfied equally by both components.

Q: Why is LCC2/0-12DWH-X classified as obsolete?

A: Obsolescence reflects manufacturing discontinuation by Panduit Corp. The LCC2/0-12W-X remains in active production and is the current equivalent offering for this terminal specification.

Q: What parameters must remain constant for substitution validity?

A: Wire gauge (2/0 AWG), stud size (1/2), terminal type (rectangular tongue), tab thickness (0.130"), outer width (0.850"), barrel dimensions (ID 0.450", OD 0.580"), ring ID (0.530"), contact material (copper), contact finish (electro-tin), and termination method (crimp barrel) must all remain equivalent. Deviation in any of these parameters invalidates substitution.

Q: Is packaging type a substitution criterion?

A: Packaging type (bulk vs. other configurations) does not affect electrical or mechanical compatibility. Packaging differences relate to order quantity and handling, not component function or performance.