LCC1/0-14A-X Equivalent & Substitute Parts

Part Overview

The LCC1/0-14A-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1/0 AWG wire applications with a 1/4 inch stud connection. This component is classified as obsolete, indicating that direct procurement from original inventory may become limited. The terminal features a non-insulated copper construction with electro-tin contact finish, suitable for free-hanging in-line mounting applications. Identification of equivalent substitute parts is necessary to ensure continued availability and maintain design compatibility in applications requiring this terminal specification.

Substiute Parts

LCC1/0-14A-X

Panduit CorpIn Stock: 801LCC1/0-14A-X Datasheet

Current PartRFQ

LCDX1/0-14A-X

Panduit CorpIn Stock: 1004LCDX1/0-14A-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCC1/0-14A-X is determined by strict alignment of the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate 1/0 AWG wire to ensure proper barrel crimp engagement and electrical conductivity.

Stud/Tab Size Alignment: The 1/4 inch stud connection is a fixed mechanical interface requirement. Substitute parts must feature identical stud dimensions to maintain compatibility with mating hardware.

Contact Material and Finish: Copper construction with electro-tin finish ensures consistent electrical performance and corrosion resistance. Substitute parts must maintain these specifications.

Termination Method: Crimp and barrel termination methodology must remain consistent to ensure proper installation procedures and mechanical integrity.

Ring ID Specification: The 0.270 inch ring inner diameter is a critical dimensional parameter that determines fit on the stud connection point.

Compliance Certifications: RoHS3 compliance and REACH unaffected status must be maintained in substitute selections.

The LCDX1/0-14A-X qualifies as a substitute based on these parameters, despite differences in terminal type (lug versus tongue) and certain dimensional variations, as the core electrical and mechanical interface requirements remain satisfied.

Parameter Comparison

Engineering Selection Recommendations

The LCDX1/0-14A-X is the designated substitute for the obsolete LCC1/0-14A-X based on the following engineering criteria:

Compliance Alignment: Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory consistency across design iterations.

Active Product Status: The LCDX1/0-14A-X carries active product status with confirmed inventory availability (939 pieces), providing reliable procurement continuity compared to the obsolete LCC1/0-14A-X.

Core Interface Compatibility: Both terminals share identical wire gauge (1/0 AWG), stud size (1/4 inch), ring ID (0.270 inch), and termination methodology (crimp, barrel), ensuring mechanical and electrical interface compatibility.

Material and Electrical Properties: Copper construction with electro-tin finish is maintained across both parts, preserving electrical conductivity and corrosion resistance characteristics.

Dimensional Considerations: While the LCDX1/0-14A-X exhibits differences in overall length (2.440 inches versus 3.180 inches) and tab thickness (0.130 inches versus 0.120 inches), these variations do not affect the core stud connection interface or electrical performance in standard applications.

Frequently Asked Questions (FAQ)

Q: Can the LCDX1/0-14A-X directly replace the LCC1/0-14A-X in existing designs?

A: The LCDX1/0-14A-X maintains compatibility with the critical interface parameters: 1/0 AWG wire gauge, 1/4 inch stud connection, and 0.270 inch ring ID. The primary difference is terminal type (lug versus tongue), which affects the mechanical configuration but not the stud connection interface. Application-specific design review is necessary to confirm suitability.

Q: What are the key differences between these two terminal types?

A: The LCC1/0-14A-X features a rectangular tongue configuration, while the LCDX1/0-14A-X is a lug-style grounding terminal. Both accommodate identical wire gauges and stud sizes. The tongue design provides a different mechanical engagement method compared to the lug design, affecting how the terminal interfaces with mating hardware.

Q: Are both parts compliant with current regulatory standards?

A: Both the LCC1/0-14A-X and LCDX1/0-14A-X are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What is the significance of the obsolete status for the LCC1/0-14A-X?

A: Obsolete status indicates that the LCC1/0-14A-X is no longer in active production. While current inventory exists (785 pieces), future procurement may become unavailable. The LCDX1/0-14A-X, with active product status and higher inventory levels (939 pieces), provides long-term availability assurance.

Q: How do the dimensional differences affect terminal performance?

A: The LCDX1/0-14A-X is shorter (2.440 inches versus 3.180 inches) and has slightly thicker tab stock (0.130 inches versus 0.120 inches). These dimensional variations do not affect the stud connection interface, barrel crimp engagement, or electrical conductivity. Space constraints in specific mounting configurations should be evaluated during design review.

Q: Are the barrel dimensions identical between both parts?

A: No. The LCC1/0-14A-X has a barrel ID of 0.390 inches and OD of 0.520 inches, while the LCDX1/0-14A-X has a barrel ID of 0.450 inches and OD of 0.580 inches. These differences accommodate the respective wire gauge and terminal type designs while maintaining 1/0 AWG compatibility.

Q: What packaging format is available for both parts?

A: Both the LCC1/0-14A-X and LCDX1/0-14A-X are supplied in bulk packaging, suitable for high-volume assembly operations and direct component selection without individual packaging overhead.