LCC1/0-12F-X Equivalent & Substitute Parts

Part Overview

The LCC1/0-12F-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1/0 AWG wire applications with a 1/2 stud connection. This component is classified as a Pan-Lug™ series terminal and features crimp barrel termination with electro-tin plated copper contacts. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCC1/0-12F-X

Panduit CorpIn Stock: 917LCC1/0-12F-X Datasheet

Current PartRFQ

LCC1/0-12-X

Panduit CorpIn Stock: 945LCC1/0-12-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The LCC1/0-12F-X has one identified substitute: LCC1/0-12-X. Substitution eligibility is determined by strict equivalence across the following critical parameters:

Wire gauge (1/0 AWG), stud size (1/2), terminal type (rectangular tongue), termination method (crimp barrel), tab thickness (0.120"), barrel dimensions (ID 0.390", OD 0.520"), ring ID (0.530"), contact material (copper), contact finish (electro-tin), and insulation type (non-insulated). Both parts share the same base product number (LCC1) and Pan-Lug™ series designation, confirming functional equivalence. The substitute part maintains identical electrical and mechanical specifications required for direct replacement in applications originally specified for the LCC1/0-12F-X.

Parameter Comparison

Engineering Selection Recommendations

The LCC1/0-12F-X is obsolete and should be replaced with the LCC1/0-12-X for new designs and ongoing production requirements. The substitute part is currently active in inventory and maintains full electrical and mechanical compatibility with the original specification. Both parts satisfy ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment. The LCC1/0-12-X is available in bulk packaging and provides equivalent performance for all applications originally designed around the LCC1/0-12F-X specification. Selection of the active substitute eliminates obsolescence risk while preserving functional integrity across all electrical and mechanical parameters.

Frequently Asked Questions (FAQ)

Q: Can LCC1/0-12-X be used as a direct replacement for LCC1/0-12F-X?

A: Yes. Both parts share identical wire gauge (1/0 AWG), stud size (1/2), terminal type (rectangular tongue), termination method (crimp barrel), and all critical dimensional specifications. The substitute is functionally equivalent and maintains the same electrical and mechanical performance.

Q: What is the primary difference between these two part numbers?

A: The LCC1/0-12F-X is obsolete, while the LCC1/0-12-X is active. The substitute part is available in bulk packaging. All other specifications, including dimensions, materials, and contact properties, are identical.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry the same ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Q: What wire gauge does this terminal accommodate?

A: Both the main part and substitute are rated for 1/0 AWG wire applications.

Q: What is the stud connection size?

A: Both parts feature a 1/2 stud connection point.

Q: What termination method is used?

A: Both parts utilize crimp barrel termination with a barrel ID of 0.390" (9.91mm) and OD of 0.520" (13.21mm).

Q: What contact material and finish are specified?

A: Both parts use copper contacts with electro-tin plating for corrosion resistance and electrical conductivity.

Q: Is insulation included with these terminals?

A: No. Both parts are non-insulated terminals.

Q: What packaging options are available for the substitute part?

A: The LCC1/0-12-X is supplied in bulk packaging with 888 pieces currently in stock.