LCB6-14W-L Equivalent & Substitute Parts

Part Overview

The LCB6-14W-L is a terminal connector rectangular component manufactured by Panduit Corp, classified as wire management terminal equipment. This part is designated as obsolete and is no longer in active production. The LCB6-14W-L served applications requiring rectangular terminal connectors for wire termination and connection purposes.

Due to its obsolete status, sourcing new inventory of the LCB6-14W-L presents supply chain challenges. Identifying active equivalent parts ensures continuity of design implementation and maintains access to functionally compatible components for new production runs and field replacements.

Substiute Parts

LCB6-14W-L

Panduit CorpIn Stock: 986LCB6-14W-L Datasheet

Current PartRFQ

LCB6-14-L

Panduit CorpIn Stock: 995LCB6-14-L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCB6-14W-L is based on the following critical parameters derived from the product category and available technical specifications:

Primary Substitution Criteria:

• Manufacturer: Panduit Corp (same manufacturer ensures design compatibility)
• Terminal Type: Rectangular Tongue configuration
• Wire Gauge: 6 AWG (electrical capacity requirement)
• Stud/Tab Size: 1/4 Stud (mechanical interface specification)
• Termination Method: Crimp, Barrel (connection process compatibility)
• Contact Material: Copper (electrical conductivity requirement)
• Mounting Type: Free Hanging (In-Line) (installation configuration)

The LCB6-14-L meets all substitution criteria as an active product within the same manufacturer's Pan-Lug™ series, maintaining identical mechanical and electrical interface specifications required for direct replacement.

Parameter Comparison

Engineering Selection Recommendations

LCB6-14-L as Primary Substitute:

The LCB6-14-L is the direct equivalent for the obsolete LCB6-14W-L. Selection of the LCB6-14-L is based on the following engineering factors:

1. Product Status: The LCB6-14-L maintains active production status, ensuring long-term availability and supply chain stability compared to the obsolete LCB6-14W-L.

2. Regulatory Compliance: The LCB6-14-L carries ROHS3 Compliant certification and EAR99 export classification, meeting current regulatory requirements for component procurement and deployment.

3. Manufacturer Continuity: Both parts originate from Panduit Corp, ensuring design consistency and compatibility with existing documentation and installation procedures.

4. Series Designation: The LCB6-14-L belongs to the Pan-Lug™ series, which represents the current product line for rectangular terminal connectors from this manufacturer.

5. Mechanical and Electrical Compatibility: The substitute part maintains identical specifications for wire gauge (6 AWG), stud size (1/4), terminal type (Rectangular Tongue), and termination method (Crimp, Barrel), ensuring direct functional replacement without circuit redesign.

Frequently Asked Questions (FAQ)

Q: Can the LCB6-14-L directly replace the LCB6-14W-L in existing applications?

A: Yes. The LCB6-14-L is the direct equivalent for the LCB6-14W-L. Both components share identical mechanical interface specifications (1/4 stud size), electrical capacity (6 AWG wire gauge), and termination methodology (crimp barrel connection). No circuit modification or installation procedure changes are required.

Q: What is the primary reason for substituting the LCB6-14W-L?

A: The LCB6-14W-L is classified as obsolete and no longer in active production. The LCB6-14-L is the active production equivalent that maintains all functional and mechanical specifications while ensuring continued availability and regulatory compliance.

Q: Are there packaging differences between the LCB6-14W-L and LCB6-14-L?

A: The LCB6-14-L is supplied in Bulk packaging. The original packaging specification for the LCB6-14W-L was not provided in the available technical documentation.

Q: Does the LCB6-14-L meet current regulatory standards?

A: Yes. The LCB6-14-L is ROHS3 Compliant and carries EAR99 export classification, meeting current regulatory requirements for component procurement and international deployment.

Q: What is the wire gauge specification for the substitute part?

A: The LCB6-14-L is rated for 6 AWG wire termination, matching the wire management requirements of the original LCB6-14W-L specification.

Q: What is the stud size for the LCB6-14-L?

A: The LCB6-14-L features a 1/4 inch stud size, providing the mechanical interface required for connection to standard 1/4 inch mounting points and hardware.

Q: What termination method is used for the LCB6-14-L?

A: The LCB6-14-L utilizes crimp barrel termination, a standard connection method for wire attachment to rectangular terminal connectors. This method requires appropriate crimping tools and dies specified for 6 AWG wire and barrel dimensions.

Q: Is the LCB6-14-L insulated or non-insulated?

A: The LCB6-14-L is supplied as non-insulated. Applications requiring insulation must incorporate appropriate insulation sleeves or heat-shrink tubing during assembly.

Q: What contact material is used in the LCB6-14-L?

A: The LCB6-14-L utilizes copper contacts with electro-tin finish, providing corrosion resistance and reliable electrical conductivity for wire termination applications.