LCB10-14WF-L Equivalent & Substitute Parts

Part Overview

The LCB10-14WF-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 10 AWG wire termination onto a 1/4 stud. This component is part of the Pan-Lug™ series and features crimp barrel termination with electro-tin plated copper contacts. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCB10-14WF-L

Panduit CorpIn Stock: 1021LCB10-14WF-L Datasheet

Current PartRFQ

LCB10-14W-L

Panduit CorpIn Stock: 864LCB10-14W-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCB10-14WF-L is determined by strict equivalence across the following critical parameters:

Wire gauge compatibility (10 AWG) ensures proper barrel diameter and crimp characteristics. The 1/4 stud size establishes the ring inner diameter (0.270") and mounting interface. Terminal type (rectangular tongue) and style (single stud hole) define the mechanical form factor. Termination method (crimp barrel) specifies the connection process and barrel dimensions (ID: 0.130", OD: 0.220"). Contact material (copper) and finish (electro-tin) establish electrical and corrosion resistance properties. Tab thickness (0.050") and overall width (0.420") maintain dimensional consistency.

The substitute part LCB10-14W-L matches all these critical parameters while offering active product status and current availability.

Parameter Comparison

Engineering Selection Recommendations

The LCB10-14W-L serves as the direct substitute for the obsolete LCB10-14WF-L. Both components are manufactured by Panduit Corp within the Pan-Lug™ series and maintain identical electrical and mechanical specifications across all critical parameters. The substitute part holds active product status, ensuring continued availability and manufacturing support.

Both parts satisfy ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement. The electrical characteristics, dimensional tolerances, and contact properties remain equivalent, supporting direct replacement in existing applications without circuit or assembly modifications.

Frequently Asked Questions (FAQ)

Q: Can LCB10-14W-L directly replace LCB10-14WF-L in existing assemblies?

A: Yes. Both parts share identical wire gauge (10 AWG), stud size (1/4), terminal type (rectangular tongue), barrel dimensions, contact material, and finish specifications. Direct substitution is supported without design changes.

Q: What is the primary reason for substitution?

A: The LCB10-14WF-L is classified as obsolete. The LCB10-14W-L is the active equivalent offering current manufacturing and supply availability.

Q: Are there differences in mounting orientation between these parts?

A: The LCB10-14WF-L specifies mounting type as "Free Hanging (In-Line), Right Angle." The LCB10-14W-L specifies "Free Hanging (In-Line)." Both support the same functional mounting interface with the 1/4 stud.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the difference in overall length between these parts?

A: The LCB10-14WF-L does not specify overall length in the provided data. The LCB10-14W-L specifies 1.310" (33.27mm) overall length. This dimensional difference does not affect electrical or mechanical compatibility with the 1/4 stud interface.

Q: Are both parts available in the same packaging?

A: The LCB10-14WF-L is supplied in unspecified packaging. The LCB10-14W-L is supplied in bulk packaging. Both are available as new original stock.