LCB1/0-12WF-X Equivalent & Substitute Parts

Part Overview

The LCB1/0-12WF-X is a copper compression lug terminal manufactured by Panduit Corp, classified within the Pan-Lug™ series. This rectangular tongue terminal is designed for 1/0 AWG wire applications with a 1/2 stud connection. The part features electro-tin contact finish on copper material and is configured for crimp barrel termination in a free-hanging, right-angle mounting orientation.

The LCB1/0-12WF-X is designated as obsolete. Identification of equivalent and substitute parts is necessary to maintain design compatibility and ensure continued availability for applications requiring this terminal specification.

Substiute Parts

LCB1/0-12WF-X

Panduit CorpIn Stock: 1248LCB1/0-12WF-X Datasheet

Current PartRFQ

LCB1/0-12F-X

Panduit CorpIn Stock: 1192LCB1/0-12F-X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCB1/0-12WF-X is based on electrical and mechanical parameter equivalence. The substitute part LCB1/0-12F-X maintains identical specifications across all critical dimensions and functional characteristics:

Substitution Criteria:

• Wire gauge: 1/0 AWG
• Stud/tab size: 1/2 Stud
• Terminal type: Rectangular Tongue
• Termination method: Crimp, Barrel
• Contact material: Copper
• Contact finish: Electro-Tin
• Barrel dimensions: ID 0.390" (9.91mm), OD 0.520" (13.21mm)
• Ring ID: 0.530" (13.46mm)
• Tab thickness: 0.120" (3.05mm)
• Width: 0.800" (20.32mm)
• Mounting configuration: Free Hanging (In-Line), Right Angle
• Insulation type: Non-Insulated

The substitute part differs only in product status (active versus obsolete) and packaging configuration (bulk versus original packaging).

Parameter Comparison

Engineering Selection Recommendations

The LCB1/0-12F-X is the direct substitute for the obsolete LCB1/0-12WF-X. Both parts are manufactured by Panduit Corp within the Pan-Lug™ series and share identical electrical and mechanical specifications.

Selection Basis:

The LCB1/0-12F-X is an active product, ensuring ongoing availability and supply chain continuity. The substitute part maintains full parameter equivalence with the original part across all critical dimensions, materials, and functional characteristics. The LCB1/0-12F-X carries ROHS3 compliance and REACH unaffected status, providing regulatory alignment for current applications.

Packaging differs between the two parts (bulk versus original packaging), but this distinction does not affect terminal performance or compatibility in end-use applications.

Frequently Asked Questions (FAQ)

Q: Can the LCB1/0-12F-X be used as a direct replacement for the LCB1/0-12WF-X?

A: Yes. The LCB1/0-12F-X is electrically and mechanically equivalent to the LCB1/0-12WF-X. All critical parameters including wire gauge, stud size, barrel dimensions, contact material, and finish are identical.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and packaging. The LCB1/0-12WF-X is obsolete, while the LCB1/0-12F-X is active. The LCB1/0-12F-X is supplied in bulk packaging, whereas the LCB1/0-12WF-X was supplied in original packaging.

Q: Are there any compliance differences between the two parts?

A: The LCB1/0-12F-X includes ROHS3 compliance and REACH unaffected status documentation. Both parts share the same ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Q: What wire gauge does this terminal accommodate?

A: Both the LCB1/0-12WF-X and LCB1/0-12F-X are rated for 1/0 AWG wire.

Q: What is the stud size for this terminal?

A: Both terminals feature a 1/2 stud connection point.

Q: What termination method is used?

A: Both terminals use crimp barrel termination. The barrel has an inner diameter of 0.390" (9.91mm) and outer diameter of 0.520" (13.21mm).

Q: Is this terminal insulated?

A: No. Both the LCB1/0-12WF-X and LCB1/0-12F-X are non-insulated terminals.

Q: What material and finish are used for the contact?

A: Both terminals feature copper material with electro-tin contact finish.