LCAX8-38H-L Equivalent & Substitute Parts

Part Overview

The LCAX8-38H-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 8 AWG wire termination on a 3/8 stud. This non-insulated, electro-tin plated copper terminal features a crimp barrel termination method and is part of the Pan-Lug™ series. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCAX8-38H-L

Panduit CorpIn Stock: 1300LCAX8-38H-L Datasheet

Current PartRFQ

LCAX8-38-L

Panduit CorpIn Stock: 1085LCAX8-38-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete LCAX8-38H-L is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Wire gauge: 8 AWG
• Stud/tab size: 3/8 stud
• Barrel inner diameter: 0.180" (4.57mm)
• Barrel outer diameter: 0.270" (6.86mm)
• Ring inner diameter: 0.410" (10.41mm)

Mechanical Compatibility Parameters:

• Terminal type: Rectangular tongue
• Terminal style: Single stud hole
• Tab thickness: 0.050" (1.27mm)
• Termination method: Crimp, barrel

Material & Finish Parameters:

• Contact material: Copper
• Contact finish: Electro-tin
• Insulation: Non-insulated

Regulatory Compliance Parameters:

• RoHS3 compliance
• REACH unaffected status

The substitute part LCAX8-38H-L must maintain all electrical and mechanical dimensions, material composition, and regulatory compliance to ensure direct functional equivalence in existing applications.

Parameter Comparison

Engineering Selection Recommendations

The LCAX8-38-L serves as the direct active equivalent for the obsolete LCAX8-38H-L. Both parts share identical electrical and mechanical specifications, including wire gauge, stud size, barrel dimensions, and contact materials. The substitute part maintains full ROHS3 compliance and REACH unaffected status, ensuring regulatory equivalence.

The primary distinction between the two parts is product status: LCAX8-38H-L is obsolete while LCAX8-38-L is active. The LCAX8-38-L is available in production quantities (1005 pcs in stock) and represents the current manufacturing standard for this terminal specification within the Pan-Lug™ series.

For applications currently specified with LCAX8-38H-L, direct substitution with LCAX8-38-L is supported by complete parameter alignment across all critical electrical, mechanical, and compliance dimensions.

Frequently Asked Questions (FAQ)

Q: Can LCAX8-38-L be used as a direct replacement for LCAX8-38H-L?

A: Yes. Both parts are identical in all critical electrical and mechanical parameters, including wire gauge (8 AWG), stud size (3/8), barrel dimensions, contact material and finish, and regulatory compliance status. The substitute part is the active production equivalent.

Q: What is the difference between LCAX8-38H-L and LCAX8-38-L?

A: The primary difference is product status. LCAX8-38H-L is classified as obsolete, while LCAX8-38-L is active. All functional specifications, dimensions, and materials are identical between the two parts.

Q: Are there any mounting or installation differences between these parts?

A: Both parts feature the same terminal type (rectangular tongue), single stud hole configuration, and crimp barrel termination method. Installation procedures and mounting requirements are equivalent.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both LCAX8-38H-L and LCAX8-38-L are ROHS3 compliant and REACH unaffected, ensuring equivalent regulatory status for applications subject to these standards.

Q: What wire gauge does this terminal accommodate?

A: Both parts are specified for 8 AWG wire termination with a barrel inner diameter of 0.180" (4.57mm).

Q: Is the contact finish the same on both parts?

A: Yes. Both parts feature electro-tin plated copper contacts, providing identical corrosion resistance and electrical conductivity characteristics.