LCAS8-14F-L Equivalent & Substitute Parts

Part Overview

The LCAS8-14F-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 8 AWG wire termination on a 1/4" stud. This component is classified as a Pan-Lug™ series terminal with crimp barrel termination and electro-tin contact finish. The part is currently listed as obsolete, necessitating identification of active equivalent components to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCAS8-14F-L

Panduit CorpIn Stock: 1193LCAS8-14F-L Datasheet

Current PartRFQ

LCA8-14F-L

Panduit CorpIn Stock: 833LCA8-14F-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete LCAS8-14F-L is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part LCA8-14F-L maintains identical specifications for wire gauge, stud size, tab thickness, termination method, contact material, contact finish, and all dimensional tolerances including barrel and ring diameters. Both components are non-insulated rectangular tongue terminals with electro-tin copper contacts suitable for 8 AWG wire applications.

The substitution is valid based on the following matching parameters:

• Wire Gauge: 8 AWG
• Terminal Type: Rectangular Tongue
• Stud/Tab Size: 1/4 Stud
• Tab Thickness: 0.070" (1.78mm)
• Termination: Crimp, Barrel
• Contact Material: Copper
• Contact Finish: Electro-Tin
• Barrel ID: 0.180" (4.57mm)
• Barrel OD: 0.270" (6.86mm)
• Ring ID: 0.270" (6.86mm)
• Insulation: Non-Insulated
• RoHS Compliance: ROHS3 Compliant

Parameter Comparison

Engineering Selection Recommendations

The LCA8-14F-L serves as the direct equivalent for the obsolete LCAS8-14F-L. Selection of the substitute part is supported by the following factors:

Product Status: The substitute part LCA8-14F-L maintains active product status with current manufacturing and distribution, ensuring long-term availability and supply chain reliability compared to the obsolete LCAS8-14F-L.

Compliance Certification: Both components are ROHS3 compliant, meeting regulatory requirements for restricted substances. The substitute part carries REACH Unaffected status, providing additional environmental compliance documentation.

Electrical and Mechanical Equivalence: All critical parameters including wire gauge, stud size, termination method, contact material, and dimensional specifications are identical between the main part and substitute, ensuring functional interchangeability in existing applications.

Manufacturing Continuity: Both components are manufactured by Panduit Corp within the Pan-Lug™ series, maintaining design consistency and quality standards across the product line.

Frequently Asked Questions (FAQ)

Q: Can LCA8-14F-L be used as a direct replacement for LCAS8-14F-L?

A: Yes. The LCA8-14F-L is a direct equivalent. All electrical and mechanical parameters are identical, including wire gauge (8 AWG), stud size (1/4"), tab thickness (0.070"), termination method (crimp barrel), contact material (copper), contact finish (electro-tin), and all dimensional specifications. The substitute part is currently in active production status.

Q: What is the difference between LCAS8-14F-L and LCA8-14F-L?

A: The primary difference is product status. LCAS8-14F-L is obsolete, while LCA8-14F-L is active. The packaging differs (unspecified versus bulk), but all functional and dimensional specifications are identical. The substitute part includes REACH Unaffected certification.

Q: Are there any compatibility concerns when substituting these parts?

A: No compatibility concerns exist. Both components are non-insulated rectangular tongue terminals with identical stud sizes, barrel dimensions, and termination specifications. They are functionally interchangeable in all applications designed for 8 AWG wire termination on 1/4" studs.

Q: Does the packaging difference affect component performance?

A: No. Packaging format (bulk versus unspecified) does not affect electrical or mechanical performance. The packaging difference relates only to order quantity and handling, not to the terminal's functional characteristics or specifications.

Q: Are both parts RoHS compliant?

A: Yes. Both LCAS8-14F-L and LCA8-14F-L are ROHS3 compliant. The substitute part additionally carries REACH Unaffected status, providing comprehensive environmental compliance documentation.

Q: What wire gauge does this terminal accommodate?

A: Both the main part and substitute are designed for 8 AWG wire termination. The barrel dimensions (0.180" ID, 0.270" OD) and crimp barrel termination method are specified for this wire gauge.

Q: Can this terminal be used with different stud sizes?

A: No. Both components are designed specifically for 1/4" studs. The ring ID of 0.270" (6.86mm) corresponds to this stud size and cannot be used with other stud diameters.