LCAF8-38F-L Equivalent & Substitute Parts

Part Overview

The LCAF8-38F-L is a rectangular tongue terminal connector manufactured by Panduit Corp, part of the Pan-Lug™ series. This component is designed for 8 AWG wire termination with a 3/8 stud connection. The terminal features a crimp barrel termination method and electro-tin contact finish on copper material. The product is classified as obsolete, necessitating identification of equivalent substitute components for ongoing applications and procurement requirements.

Substiute Parts

LCAF8-38F-L

Panduit CorpIn Stock: 821LCAF8-38F-L Datasheet

Current PartRFQ

LCAF8-38-L

Panduit CorpIn Stock: 1217LCAF8-38-L Datasheet

SimilarRFQ

LCAX8-38-L

Panduit CorpIn Stock: 1085LCAX8-38-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCAF8-38F-L is determined by the following critical parameters that must remain constant across equivalent components:

Mandatory Matching Parameters:

• Wire Gauge: 8 AWG
• Stud/Tab Size: 3/8 Stud
• Termination Method: Crimp, Barrel
• Contact Material: Copper
• Contact Finish: Electro-Tin
• Insulation Type: Non-Insulated
• Tab Thickness: 0.050" (1.27mm)
• Diameter - Barrel ID: 0.180" (4.57mm)
• Diameter - Ring ID: 0.410" (10.41mm)

Allowable Variations:

• Terminal Type: Rectangular Tongue or Lug, Grounding (both accommodate 3/8 stud connection)
• Barrel OD: Acceptable range based on crimp compatibility
• Overall Length: Variation permitted based on mounting configuration
• Product Status: Active status preferred for ongoing availability

The substitute parts LCAF8-38-L and LCAX8-38-L satisfy these criteria and are classified as equivalent alternatives.

Parameter Comparison

Engineering Selection Recommendations

LCAX8-38-L is the primary recommended substitute for the obsolete LCAF8-38F-L. This component maintains identical electrical and mechanical specifications across all critical parameters while offering the advantage of active product status, ensuring continued availability and supply chain reliability. The LCAX8-38-L is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

LCAF8-38-L serves as a secondary equivalent substitute. While this component shares all mandatory electrical and mechanical parameters with the main part, it retains obsolete product status. This substitute is suitable for applications where existing inventory must be maintained or where legacy system compatibility is required.

Both substitute parts are manufactured by Panduit Corp within the Pan-Lug™ series and are compatible with 8 AWG wire termination applications requiring 3/8 stud connections. Selection between substitutes should prioritize LCAX8-38-L for new designs and procurement activities due to its active status.

Frequently Asked Questions (FAQ)

Q: Can LCAX8-38-L directly replace LCAF8-38F-L in existing applications?

A: Yes. The LCAX8-38-L maintains all critical electrical and mechanical parameters required for 8 AWG wire termination with 3/8 stud connection. Both components utilize identical crimp barrel termination, copper material with electro-tin finish, and non-insulated construction.

Q: What is the difference between the rectangular tongue and lug grounding terminal types?

A: The LCAF8-38F-L and LCAX8-38-L feature rectangular tongue terminal types, while LCAF8-38-L is classified as a lug grounding type. Both accommodate the same 3/8 stud connection and maintain identical barrel dimensions and wire gauge specifications. Terminal type selection depends on specific circuit board or connector interface requirements.

Q: Are all three parts ROHS3 compliant?

A: Yes. LCAF8-38F-L, LCAF8-38-L, and LCAX8-38-L are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: Why is LCAX8-38-L preferred over LCAF8-38-L as a substitute?

A: LCAX8-38-L carries active product status, ensuring ongoing manufacturer support and supply availability. LCAF8-38-L is classified as obsolete, which may result in limited inventory and discontinued production. For new designs and long-term applications, LCAX8-38-L provides superior supply chain continuity.

Q: What packaging options are available for substitute parts?

A: LCAF8-38-L and LCAX8-38-L are supplied in bulk packaging. The original LCAF8-38F-L packaging specification was not provided in the component data.

Q: Are the barrel dimensions identical across all three parts?

A: The barrel ID is identical at 0.180" (4.57mm) across all three components. The barrel OD varies: LCAF8-38F-L and LCAF8-38-L both measure 0.320" (8.13mm), while LCAX8-38-L measures 0.270" (6.86mm). The ring ID remains constant at 0.410" (10.41mm) for all three parts.