LCAF6-10F-L Equivalent & Substitute Parts

Part Overview

The LCAF6-10F-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 6 AWG wire gauge applications with a #10 stud connection. This component is classified as a Pan-Lug™ series terminal and features a crimp barrel termination method. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCAF6-10F-L

Panduit CorpIn Stock: 853LCAF6-10F-L Datasheet

Current PartRFQ

LCAX6-10F-L

Panduit CorpIn Stock: 975LCAX6-10F-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCAF6-10F-L is based on electrical and mechanical parameter equivalence within the Pan-Lug™ terminal series. The substitute part LCAX6-10F-L maintains compatibility through the following critical parameters:

Wire gauge specification (6 AWG) ensures proper current-carrying capacity and conductor fit within the barrel crimp area. The stud size (#10) determines mechanical compatibility with mating hardware and connection points. Terminal type (rectangular tongue) and mounting configuration (free hanging, right angle) establish form factor compatibility. Termination method (crimp barrel) confirms assembly process compatibility. Dimensional parameters including tab thickness, outer width, ring ID, and barrel ID establish physical fit and electrical contact characteristics. Contact material (copper) and finish (electro-tin) ensure electrical conductivity and corrosion resistance. Non-insulated construction and color designation (blue) are maintained across the substitution group.

Parameter Comparison

Engineering Selection Recommendations

The LCAX6-10F-L is the direct substitute for the obsolete LCAF6-10F-L. Both components are manufactured by Panduit Corp within the Pan-Lug™ series and maintain identical electrical and mechanical specifications across all critical parameters. The LCAX6-10F-L holds active product status, ensuring current availability and ongoing manufacturer support.

Both parts satisfy ROHS3 compliance requirements and maintain REACH unaffected status, confirming regulatory alignment for applications subject to environmental and hazardous substance restrictions. The ECCN classification (EAR99) and HTSUS code (8536.90.4000) are identical, indicating equivalent export control and tariff treatment.

The primary distinction between these components is the barrel outer diameter (OD): the LCAF6-10F-L specifies 0.370" (9.40mm) while the LCAX6-10F-L specifies 0.310" (7.87mm). This dimensional difference reflects design optimization within the active product line. The reduced barrel OD of the LCAX6-10F-L maintains all functional electrical and mechanical compatibility while representing the current manufacturing standard.

Frequently Asked Questions (FAQ)

Q: Can LCAX6-10F-L be used as a direct replacement for LCAF6-10F-L?

A: Yes. Both components share identical wire gauge (6 AWG), stud size (#10), terminal type (rectangular tongue), termination method (crimp barrel), and all critical dimensional parameters including tab thickness, outer width, ring ID, and barrel ID. The components are electrically and mechanically equivalent.

Q: What is the significance of the different barrel outer diameters?

A: The barrel OD difference (0.370" versus 0.310") reflects design evolution within the Pan-Lug™ series. The LCAX6-10F-L represents the current active design standard. Both specifications maintain identical barrel ID (0.220") and wire gauge capacity, ensuring equivalent electrical performance and crimp compatibility.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both components maintain identical RoHS3 compliance, REACH unaffected status, ECCN classification (EAR99), and HTSUS code (8536.90.4000). Regulatory treatment and environmental compliance are equivalent.

Q: What is the availability status of each part?

A: The LCAF6-10F-L is obsolete with 762 pieces in current inventory. The LCAX6-10F-L is active with 955 pieces in current inventory, representing the ongoing production standard.

Q: Are the contact materials and finishes identical?

A: Yes. Both components feature copper contact material with electro-tin finish, ensuring identical electrical conductivity, corrosion resistance, and contact reliability characteristics.

Q: Can these parts be intermixed in existing assemblies?

A: Yes. The components are mechanically and electrically interchangeable. The identical tab thickness, outer width, ring ID, and barrel ID ensure proper fit and function in applications designed for either part number.