LCAF1-14H-X Equivalent & Substitute Parts

Part Overview

The LCAF1-14H-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 1 AWG wire gauge applications with a 1/4 stud connection. This Pan-Lug™ series terminal features a crimp barrel termination method and is constructed from copper with electro-tin contact finish. The part is classified as obsolete, necessitating identification of active equivalent alternatives for continued procurement and system maintenance.

Substiute Parts

LCAF1-14H-X

Panduit CorpIn Stock: 1010LCAF1-14H-X Datasheet

Current PartRFQ

LCAF1-14-X

Panduit CorpIn Stock: 842LCAF1-14-X Datasheet

SimilarRFQ

LCAX1-14H-X

Panduit CorpIn Stock: 1064LCAX1-14H-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCAF1-14H-X is determined by strict alignment of the following critical parameters:

Core Compatibility Parameters:

• Wire Gauge: 1 AWG (exact match required)
• Stud/Tab Size: 1/4 Stud (exact match required)
• Terminal Type: Rectangular Tongue (exact match required)
• Termination Method: Crimp, Barrel (exact match required)
• Contact Material: Copper (exact match required)
• Contact Finish: Electro-Tin (exact match required)

Allowable Variation Parameters:

• Mounting Type: Free Hanging (In-Line) with or without 45° Angle orientation
• Width - Outer Edges: Tolerance within connector design specifications
• Barrel Diameter (ID/OD): Tolerance within connector design specifications
• Color: Variation permitted (functional indicator only)
• Product Status: Active status preferred for new procurement

The substitute parts LCAF1-14-X and LCAX1-14H-X satisfy all core compatibility parameters while maintaining functional equivalence for terminal connector applications.

Parameter Comparison

Engineering Selection Recommendations

LCAF1-14-X Selection Criteria: The LCAF1-14-X is an active product offering direct functional equivalence to the obsolete LCAF1-14H-X. Both parts share identical core specifications including wire gauge, stud size, tab thickness, barrel dimensions, and ring ID. The primary difference is the removal of the 45° angle mounting feature in the LCAF1-14-X, which transitions the terminal to a standard in-line free hanging configuration. This substitute is suitable for applications where the 45° angle orientation is not a system requirement. ROHS3 compliance and REACH unaffected status are maintained.

LCAX1-14H-X Selection Criteria: The LCAX1-14H-X maintains the 45° angle mounting configuration of the original LCAF1-14H-X while providing active product status. This substitute preserves the angular mounting feature and is appropriate for applications requiring the 45° angle orientation. Minor dimensional variations exist in the barrel outer diameter (0.520" versus 0.590") and outer edge width (0.760" versus 0.800"), which remain within connector design tolerances. The color designation changes from pink to green. ROHS3 compliance and REACH unaffected status are maintained.

Compliance Verification: Both substitute parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment with the original LCAF1-14H-X specification.

Frequently Asked Questions (FAQ)

Q: Can LCAF1-14-X and LCAX1-14H-X be used interchangeably with LCAF1-14H-X?

A: Both parts satisfy the core electrical and mechanical compatibility requirements for 1 AWG wire gauge, 1/4 stud connection, and crimp barrel termination. Selection between them depends on mounting orientation requirements. The LCAF1-14-X eliminates the 45° angle feature, while the LCAX1-14H-X preserves it. Verify your application's mounting orientation specification before selection.

Q: What are the critical parameters that must match for terminal substitution?

A: Wire gauge (1 AWG), stud/tab size (1/4 stud), terminal type (rectangular tongue), termination method (crimp barrel), contact material (copper), and contact finish (electro-tin) must remain constant. Variations in mounting angle, outer dimensions within tolerance, and color designation do not affect functional compatibility.

Q: Why is the LCAF1-14H-X listed as obsolete?

A: The LCAF1-14H-X has been discontinued by Panduit Corp. The active alternatives LCAF1-14-X and LCAX1-14H-X provide equivalent functionality and are available for new procurement and system maintenance.

Q: Are there dimensional differences between the substitute parts?

A: Yes. The LCAX1-14H-X has a barrel outer diameter of 0.520" compared to 0.590" for both the LCAF1-14H-X and LCAF1-14-X. The outer edge width of the LCAX1-14H-X is 0.760" versus 0.800" for the other two parts. These variations remain within connector design specifications and do not affect electrical performance or wire gauge compatibility.

Q: Do all three parts maintain the same regulatory compliance?

A: Yes. The LCAF1-14H-X, LCAF1-14-X, and LCAX1-14H-X are all ROHS3 compliant and REACH unaffected, ensuring consistent regulatory alignment across all three part numbers.

Q: What is the significance of the color difference between pink and green terminals?

A: Color designation serves as a functional indicator within the Pan-Lug™ series but does not affect electrical or mechanical performance. Selection between pink (LCAF1-14H-X, LCAF1-14-X) and green (LCAX1-14H-X) should be based on application requirements and system documentation.

Q: How do I determine which substitute part is appropriate for my application?

A: Identify whether your application requires the 45° angle mounting orientation. If the 45° angle is required, select LCAX1-14H-X. If standard in-line mounting is acceptable, select LCAF1-14-X. Both parts maintain full electrical and mechanical compatibility with the original LCAF1-14H-X specification for 1 AWG wire gauge and 1/4 stud connections.