LC7.0 Transient Voltage Suppressor Equivalent & Substitute Parts

Part Overview

The LC7.0 is a unidirectional Zener-type transient voltage suppressor (TVS) diode manufactured by Microchip Technology, designed for general-purpose overvoltage protection applications. This through-hole component operates across a wide temperature range of -65°C to 175°C and is currently in active production status with 1030 units in stock.

The LC7.0 requires equivalent or substitute parts when design specifications demand alternative packaging formats, enhanced compliance certifications, or when primary inventory becomes unavailable. Substitute parts must maintain electrical compatibility across critical parameters including reverse standoff voltage, clamping voltage, peak pulse current, and power dissipation ratings to ensure functional equivalence in circuit protection applications.

Substiute Parts

LC7.0

Microchip TechnologyIn Stock: 1060LC7.0 Datasheet

Current PartRFQ

LCE6.5A

Littelfuse Inc.In Stock: 1150LCE6.5A Datasheet

SimilarRFQ

LCE7.0A

Littelfuse Inc.In Stock: 1461LCE7.0A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LC7.0 are qualified based on the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Reverse standoff voltage within the 6.5V to 7V range
• Peak pulse current rating of 100A minimum
• Peak pulse power rating of 1500W minimum
• Through-hole mounting configuration
• Unidirectional Zener-type TVS diode topology
• General-purpose overvoltage protection application class

Secondary Compatibility Factors:

• Operating temperature range compatibility (minimum -55°C to 175°C acceptable)
• Package format: DO-201AA or DO-13 (DO-202AA) configurations
• RoHS and REACH compliance status for regulatory alignment

The substitute parts LCE7.0A and LCE6.5A meet these criteria with minor variations in clamping voltage and package format, maintaining functional equivalence for circuit protection duty.

Parameter Comparison

Engineering Selection Recommendations

LC7.0 (Microchip Technology) - Primary Selection

The LC7.0 remains the primary component choice when the DO-13 (DO-202AA) package format is required and RoHS non-compliance is acceptable for the application. This part offers the highest clamping voltage specification at 13.3V maximum, providing superior transient suppression margin. The extended operating temperature range of -65°C to 175°C supports demanding thermal environments.

LCE7.0A (Littelfuse Inc.) - Preferred Substitute

The LCE7.0A is the recommended substitute when ROHS3 compliance is mandated or when DO-201AA package compatibility is required. This part maintains identical reverse standoff voltage (7V) and breakdown voltage (7.78V) specifications as the LC7.0. The clamping voltage is reduced to 12V maximum, which remains within acceptable protection parameters for most general-purpose applications. ROHS3 compliance aligns with modern regulatory requirements for commercial and industrial electronics.

LCE6.5A (Littelfuse Inc.) - Secondary Substitute

The LCE6.5A serves as a secondary substitute when lower reverse standoff voltage (6.5V) is acceptable within circuit design margins. This part provides the lowest clamping voltage at 11.2V maximum and is suitable for applications with tighter voltage regulation requirements. ROHS3 compliance and DO-201AA package format provide regulatory alignment and mechanical compatibility with standard through-hole PCB layouts.

Compliance Considerations

Selection between substitute parts should account for RoHS compliance requirements. The LC7.0 is RoHS non-compliant, while both LCE7.0A and LCE6.5A are ROHS3 compliant. All three parts maintain REACH Unaffected status and share identical ECCN (EAR99) and HTSUS (8541.10.0080) classifications.

Frequently Asked Questions (FAQ)

Q: Can the LCE7.0A directly replace the LC7.0 in existing designs?

A: The LCE7.0A is electrically compatible with the LC7.0 for general-purpose TVS applications. Both parts share identical reverse standoff voltage (7V) and peak pulse current (100A) ratings. The primary difference is the reduced clamping voltage (12V vs. 13.3V), which is acceptable for most protection circuits. Package format differs (DO-201AA vs. DO-13), requiring PCB layout verification for through-hole mounting compatibility.

Q: What is the functional difference between the LC7.0 and LCE6.5A?

A: The LCE6.5A operates at a lower reverse standoff voltage (6.5V vs. 7V) and provides lower clamping voltage (11.2V vs. 13.3V). Both maintain 100A peak pulse current and 1500W power dissipation. The LCE6.5A is suitable for circuits where lower voltage thresholds are acceptable and provides tighter voltage regulation during transient events.

Q: Are there package compatibility issues when substituting these parts?

A: Yes. The LC7.0 uses DO-13 (DO-202AA) package, while both Littelfuse substitutes (LCE7.0A and LCE6.5A) use DO-201AA package format. Although both are through-hole configurations, PCB footprint and lead spacing differ. Verify PCB layout compatibility before substitution. Both packages are standard axial lead formats suitable for conventional through-hole assembly.

Q: Does RoHS compliance affect electrical performance?

A: No. RoHS compliance status does not alter electrical performance characteristics. The difference between RoHS non-compliant LC7.0 and ROHS3 compliant LCE7.0A and LCE6.5A relates to material composition and manufacturing process, not functional specifications. Selection should be based on regulatory requirements for the end application.

Q: What is the temperature range difference between the LC7.0 and substitute parts?

A: The LC7.0 operates from -65°C to 175°C, while both LCE7.0A and LCE6.5A operate from -55°C to 175°C. The LC7.0 provides 10°C additional low-temperature capability. For applications requiring operation below -55°C, the LC7.0 is the only suitable option among these three parts.

Q: Can the LCE6.5A be used in applications designed for 7V standoff voltage?

A: The LCE6.5A operates at 6.5V standoff voltage, which is 0.5V lower than the LC7.0 design specification. This part will trigger protection at a lower voltage threshold. Use only when circuit design margins accommodate the reduced standoff voltage and lower clamping voltage (11.2V). Verify that protected circuits tolerate this lower protection threshold.

Q: What inventory considerations apply to these substitutes?

A: The LC7.0 has 1030 units in stock, LCE7.0A has 1366 units, and LCE6.5A has 1053 units. All three parts are currently in active production. Inventory levels support immediate procurement for all options.