LC5203D LED Driver IC Equivalent & Substitute Parts

Part Overview

The LC5203D is an AC DC offline switcher LED driver IC manufactured by Sanken Electric USA Inc., designed for offline PWM dimming applications with 800mA output capability. This device operates across a wide input voltage range of 25V to 200V and features an internal switch with step-down (buck) topology. The LC5203D is classified as obsolete, making equivalent and substitute parts necessary for new designs and ongoing production requirements. Substitute parts must maintain compatibility with the core functional parameters: AC DC offline switching topology, step-down buck configuration, PWM dimming capability, and 800mA output current rating.

Key Parameters

Parameter	LC5203D Value
Manufacturer	Sanken Electric USA Inc.
Category	Power Management (PMIC)
Product Status	Obsolete
Type	AC DC Offline Switcher
Topology	Step-Down (Buck)
Internal Switch(s)	Yes
Number of Outputs	1
Voltage - Supply (Min)	25V
Voltage - Supply (Max)	200V
Current - Output / Channel	800mA
Frequency	200kHz
Dimming	PWM
Operating Temperature	-40°C ~ 105°C (TA)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300", 7.62mm), 7 Leads
RoHS Status	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the LC5203D are evaluated based on the following critical parameters that determine functional compatibility:

Primary Substitution Criteria:

Type: AC DC Offline Switcher (mandatory)
Topology: Step-Down (Buck) or Flyback (acceptable alternative)
Dimming Capability: PWM, Triac, or Analog (all acceptable for dimming applications)
Internal Switch: Presence of internal switch (preferred but not mandatory)
Number of Outputs: Single output (mandatory)
Current Rating: 800mA or higher (to support equivalent load capacity)
Voltage Supply Range: Must accommodate 25V minimum input (wider ranges acceptable)
Operating Temperature: -40°C minimum and 105°C or higher maximum (to match or exceed thermal range)
RoHS Compliance: ROHS3 or RoHS Compliant (regulatory requirement)

Secondary Considerations:

Mounting Type: Through-hole preferred for direct replacement; surface mount acceptable for redesign
Package compatibility: DIP packages preferred for direct replacement; SOIC, VSSOP, or eSIP acceptable for circuit redesign
Product Status: Active status preferred for long-term availability; Last Time Buy acceptable with inventory verification

Substitute parts are grouped into three categories based on compatibility level and application suitability.

Parameter Comparison

Parameter	LC5203D	HV9925SG-G	LM3445MMX/NOPB	LNK406EG	TPS92001DR	RT8458AGJ6
Manufacturer	Sanken Electric USA Inc.	Microchip Technology	Texas Instruments	Power Integrations	Texas Instruments	Richtek USA Inc.
Type	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher
Topology	Step-Down (Buck)	Step-Down (Buck)	Step-Down (Buck)	Flyback	Flyback, Step-Down (Buck)	Step-Down (Buck)
Internal Switch(s)	Yes	Yes	No	Yes	No	No
Number of Outputs	1	1	1	1	1	1
Voltage - Supply (Min)	25V	20V	8V	36V	—	17V
Voltage - Supply (Max)	200V	400V	12V	725V	21V	31V
Current - Output / Channel	800mA	50mA	—	1.5A	—	—
Frequency	200kHz	—	30kHz ~ 1MHz	66kHz	100kHz	47kHz
Dimming	PWM	PWM	Triac	Triac	Triac	Analog
Operating Temperature (Min)	-40°C	-40°C	-40°C	-40°C	-40°C	-40°C
Operating Temperature (Max)	105°C (TA)	85°C (TA)	125°C (TJ)	150°C (TJ)	105°C (TJ)	125°C (TJ)
Mounting Type	Through Hole	Surface Mount	Surface Mount	Through Hole	Surface Mount	Surface Mount
Package / Case	8-DIP	8-SOIC	10-VSSOP	eSIP-7C	8-SOIC	TSOT-23-6
Product Status	Obsolete	Active	Active	Active	Last Time Buy	Active
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Category 1: Direct Functional Equivalents (Preferred for Redesign)

HV9925SG-G (Microchip Technology) and LM3445MMX/NOPB (Texas Instruments) are the primary substitutes. Both maintain AC DC offline switcher topology with step-down buck configuration and single output. HV9925SG-G supports PWM dimming matching the LC5203D dimming method, while LM3445MMX/NOPB provides Triac dimming for alternative dimming control schemes. Both are active products with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). HV9925SG-G operates at 20V–400V input range with 50mA output, suitable for lower-power LED applications. LM3445MMX/NOPB operates at 8V–12V input range without specified output current, requiring application-specific validation.

Category 2: Alternative Topology Substitutes (For Specialized Applications)

LNK406EG (Power Integrations) employs Flyback topology instead of buck topology, offering higher input voltage range (36V–725V) and higher output current (1.5A). This part is active with RoHS compliance and operates to 150°C junction temperature. Flyback topology provides galvanic isolation, beneficial for certain offline LED driver applications. TPS92001DR (Texas Instruments) combines Flyback and Step-Down topologies with Triac dimming, operating at maximum 21V input with 100kHz frequency. This part is Last Time Buy status, limiting long-term availability.

Category 3: Specialized Dimming Control Substitutes

RT8458AGJ6 (Richtek USA Inc.) provides Analog dimming control with step-down topology, operating at 17V–31V input range and 47kHz frequency. This part is active with ROHS3 compliance and 125°C maximum junction temperature. Analog dimming offers continuous brightness control alternative to PWM or Triac methods.

Compliance and Availability Considerations:

All recommended substitutes maintain RoHS compliance (RoHS Compliant or ROHS3 Compliant), meeting regulatory requirements. Active product status (HV9925SG-G, LM3445MMX/NOPB, LNK406EG, RT8458AGJ6) ensures long-term availability and supply chain stability. TPS92001DR, classified as Last Time Buy, should be selected only when inventory verification confirms sufficient stock for production requirements.

Frequently Asked Questions (FAQ)

Q: Can HV9925SG-G directly replace LC5203D in existing PCB layouts?

A: No. HV9925SG-G uses 8-SOIC surface-mount package versus LC5203D's 8-DIP through-hole package. PCB redesign is required. However, functional compatibility is maintained for AC DC offline switching with PWM dimming at the circuit level.

Q: What is the primary difference between PWM and Triac dimming in these substitutes?

A: PWM (Pulse Width Modulation) dimming, used by LC5203D and HV9925SG-G, controls brightness by varying the duty cycle of the output signal. Triac dimming, used by LM3445MMX/NOPB and LNK406EG, controls brightness by phase-angle modulation compatible with standard AC wall dimmer switches. Selection depends on the dimming control interface required by the application.

Q: Why does LM3445MMX/NOPB have no specified output current rating?

A: LM3445MMX/NOPB is a controller IC without integrated output switch, requiring external power switch implementation. Output current capability depends on the external switch selected. This differs from LC5203D, which integrates the output switch internally.

Q: Is LNK406EG suitable for direct replacement of LC5203D?

A: LNK406EG provides functional substitution for AC DC offline switching with higher current capability (1.5A versus 800mA) and wider input voltage range (36V–725V). However, Flyback topology differs from LC5203D's buck topology, requiring circuit redesign. LNK406EG is through-hole mounted (eSIP-7C), facilitating board-level integration similar to LC5203D's DIP package.

Q: What does "Last Time Buy" status mean for TPS92001DR?

A: Last Time Buy indicates the manufacturer has announced end-of-life for this part. Existing inventory may be available, but no future production is planned. This part should be selected only when current stock is verified sufficient for the entire production run, or when transitioning to alternative parts is not feasible.

Q: Can I use RT8458AGJ6 if my application requires PWM dimming?

A: No. RT8458AGJ6 provides Analog dimming control only. If PWM dimming is required, select HV9925SG-G or other PWM-capable alternatives. Analog dimming requires continuous voltage control rather than pulse-width modulation.

Q: Which substitute offers the widest input voltage range?

A: LNK406EG operates across 36V–725V input range, the widest among all substitutes. This makes it suitable for high-voltage offline applications. However, its Flyback topology and higher current rating (1.5A) may exceed requirements for 800mA applications, requiring circuit optimization.

Q: Are all substitutes RoHS compliant?

A: Yes. All listed substitutes meet RoHS compliance requirements (either RoHS Compliant or ROHS3 Compliant), ensuring regulatory compliance for EU and similar markets.

Q: What is the significance of MSL (Moisture Sensitivity Level) rating?

A: MSL rating indicates moisture sensitivity during storage and handling. MSL 1 (unlimited) means the part has no moisture sensitivity restrictions and can be stored indefinitely. MSL 3 (168 hours) requires controlled storage conditions and limits shelf life. LC5203D and most active substitutes carry MSL 1 rating, simplifying inventory management.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message