Equivalent & Substitute Parts for LAR2E331MELA25

Part Overview

The LAR2E331MELA25 is a 330 µF, 250 V aluminum electrolytic capacitor in radial, can snap-in package manufactured by Nichicon. This component is rated for 2000 hours at 105°C and is designed for general-purpose applications requiring through-hole mounting. The part is active and ROHS3 compliant.

Substitute parts are necessary when the original LAR series reaches end-of-life, when inventory constraints occur, or when design requirements allow for enhanced performance characteristics such as extended lifetime ratings or improved ripple current handling.

Key Parameters

Parameter	Value
Capacitance	330 µF
Voltage Rating	250 V
Tolerance	±20%
Polarization	Polar
Package Type	Radial, Can - Snap-In
Mounting Type	Through Hole
Lead Spacing	0.394" (10.00 mm)
Operating Temperature Range	-40°C to 105°C
Lifetime Rating	2000 Hrs @ 105°C
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence in the following parameters:

Capacitance: 330 µF (exact match required)
Voltage Rating: 250 V (exact match required)
Tolerance: ±20% (exact match required)
Polarization: Polar (exact match required)
Package Type: Radial, Can - Snap-In (exact match required)
Mounting Type: Through Hole (exact match required)
Lead Spacing: 0.394" (10.00 mm) (exact match required)
Operating Temperature Range: -40°C to 105°C (exact match required)

All substitute parts listed meet these core electrical and mechanical requirements. Variations in physical dimensions (diameter and height), ripple current ratings, and lifetime specifications do not disqualify a part from substitution, provided the core parameters remain identical.

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Ripple Current @ 120 Hz	Ripple Current @ 50 kHz	Diameter	Height (Max)	Status
LAR2E331MELA25	Nichicon	LAR	330 µF	250 V	±20%	2000 Hrs	1.2 A	1.8 A	0.984" (25.00 mm)	0.984" (25.00 mm)	Active
LGW2E331MELA25	Nichicon	LGW	330 µF	250 V	±20%	3000 Hrs	1.8 A	2.7 A	0.984" (25.00 mm)	0.984" (25.00 mm)	Active
LGN2E331MELA25	Nichicon	LGN	330 µF	250 V	±20%	3000 Hrs	1.2 A	1.8 A	0.984" (25.00 mm)	1.063" (27.00 mm)	Active
LGN2E331MELY35	Nichicon	LGN	330 µF	250 V	±20%	3000 Hrs	1.2 A	1.8 A	0.787" (20.00 mm)	1.457" (37.00 mm)	Active
LGN2E331MELZ30	Nichicon	LGN	330 µF	250 V	±20%	3000 Hrs	1.2 A	1.8 A	0.866" (22.00 mm)	1.260" (32.00 mm)	Active
LGU2E331MELA	Nichicon	LGU	330 µF	250 V	±20%	3000 Hrs	1.3 A	1.95 A	0.984" (25.00 mm)	1.181" (30.00 mm)	Active
LGU2E331MELB	Nichicon	LGU	330 µF	250 V	±20%	3000 Hrs	1.3 A	1.95 A	1.181" (30.00 mm)	0.984" (25.00 mm)	Active
LGU2E331MELY	Nichicon	LGU	330 µF	250 V	±20%	3000 Hrs	1.2 A	1.8 A	0.787" (20.00 mm)	1.575" (40.00 mm)	Active
LGU2E331MELZ	Nichicon	LGU	330 µF	250 V	±20%	3000 Hrs	1.3 A	1.95 A	0.866" (22.00 mm)	1.575" (40.00 mm)	Active
LGW2E331MELZ30	Nichicon	LGW	330 µF	250 V	±20%	3000 Hrs	1.8 A	2.7 A	0.866" (22.00 mm)	1.181" (30.00 mm)	Active
381LQ331M250H022	Cornell Dubilier Electronics (CDE)	381LQ	330 µF	250 V	±20%	2000 Hrs	1.2 A	1.68 A	0.866" (22.00 mm)	1.260" (32.00 mm)	Active

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and REACH unaffected status, matching the regulatory posture of the LAR2E331MELA25.

Direct Nichicon Substitutes (LGW and LGN Series): These parts maintain identical electrical specifications while offering extended lifetime ratings of 3000 hours at 105°C compared to the original 2000-hour rating. Physical dimensions vary; verify PCB layout compatibility before selection.

LGU Series Substitutes: These Nichicon parts provide 3000-hour lifetime ratings with comparable or improved ripple current performance. Dimensional variations require layout verification.

Cornell Dubilier 381LQ331M250H022: This alternative manufacturer part maintains the 2000-hour lifetime rating and meets all core electrical requirements. It is available in high inventory volume. Verify mechanical fit and lead spacing compatibility with existing PCB designs.

Frequently Asked Questions (FAQ)

Q: Can I substitute LAR2E331MELA25 with any of the listed parts?

A: Yes, all listed parts meet the core electrical and mechanical requirements: 330 µF capacitance, 250 V rating, ±20% tolerance, polar configuration, radial snap-in package, through-hole mounting, and 10.00 mm lead spacing. Physical dimensions vary; verify PCB layout clearances before installation.

Q: What is the primary difference between the LAR series and LGW/LGN/LGU series?

A: The LAR series is rated for 2000 hours at 105°C. The LGW, LGN, and LGU series are rated for 3000 hours at 105°C, providing extended operational life. Ripple current ratings also vary by series.

Q: Are there dimensional constraints I should consider?

A: Yes. The original LAR2E331MELA25 has a diameter of 0.984" (25.00 mm) and height of 0.984" (25.00 mm). Substitute parts range from 0.787" to 1.181" in diameter and 0.984" to 1.575" in height. Verify that your PCB layout accommodates the selected substitute's physical dimensions.

Q: Can I use the Cornell Dubilier 381LQ331M250H022 as a direct replacement?

A: The 381LQ331M250H022 meets all core electrical specifications and has ROHS3 compliance. However, it has a different diameter (0.866" vs. 0.984") and height (1.260" vs. 0.984"). Verify mechanical fit with your PCB design before substitution.

Q: Which substitute offers the best ripple current performance?

A: The LGW series (LGW2E331MELA25 and LGW2E331MELZ30) provides the highest ripple current ratings: 1.8 A at 120 Hz and 2.7 A at 50 kHz, compared to the original 1.2 A and 1.8 A respectively.

Q: Are all substitutes ROHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory compliance of the original LAR2E331MELA25.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message