LAN8710A-EZC Equivalent & Substitute Parts

Part Overview

The LAN8710A-EZC is a full-duplex Ethernet transceiver IC manufactured by Microchip Technology, supporting MII and RMII protocols with 4/4 driver/receiver configuration. This component is classified as an active product with ROHS3 compliance and is packaged in a 32-QFN-EP (5x5) surface mount format. Substitute parts are identified when equivalent electrical specifications, protocol support, and mechanical compatibility are maintained across alternative packaging or temperature rating configurations.

Substiute Parts

LAN8710A-EZC

Microchip TechnologyIn Stock: 20432LAN8710A-EZC Datasheet

Current PartRFQ

LAN8710AI-EZK

Microchip TechnologyIn Stock: 15628LAN8710AI-EZK Datasheet

DirectRFQ

LAN8710A-EZC-ABC

Microchip TechnologyIn Stock: 17699LAN8710A-EZC-ABC Datasheet

MFR RecommendedRFQ

LAN8710A-EZK-TR

Microchip TechnologyIn Stock: 24685LAN8710A-EZK-TR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAN8710A-EZC is determined by the following critical parameters:

• Protocol support (MII and RMII compatibility required)
• Driver/receiver configuration (4/4 full-duplex)
• Supply voltage range (1.6V ~ 3.6V)
• Package type (32-VFQFN Exposed Pad)
• Mounting method (Surface Mount)
• RoHS and MSL compliance status

The identified substitute parts maintain these core electrical and mechanical specifications. Variations in operating temperature range, supplier device package designation, and packaging format (Tray vs. Cut Tape) do not affect functional interchangeability within the specified parameter constraints.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active product status and full ROHS3 compliance with identical MSL ratings. Selection between LAN8710A-EZC and its substitutes should be based on:

• Operating temperature requirements: LAN8710AI-EZK extends the lower temperature limit to -40°C, suitable for industrial or extended-range applications
• Packaging format: LAN8710A-EZK-TR is supplied in Cut Tape and Digi-Reel format for automated assembly processes, while LAN8710A-EZC and LAN8710A-EZC-ABC are supplied in Tray format
• Supplier device package designation: LAN8710A-EZC-ABC uses 32-SQFN packaging; LAN8710AI-EZK and LAN8710A-EZK-TR use 32-QFN packaging

All parts maintain identical electrical specifications, protocol support, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can LAN8710AI-EZK replace LAN8710A-EZC in all applications?

A: LAN8710AI-EZK is functionally equivalent with an extended operating temperature range (-40°C ~ 85°C vs. 0°C ~ 85°C). It is suitable for replacement in applications where the lower temperature specification is not a constraint.

Q: What is the difference between 32-QFN-EP, 32-QFN, and 32-SQFN packages?

A: All three designations refer to 32-pin quad flat no-lead packages in 5x5mm form factor with exposed pad. The suffix variations indicate different supplier package designations. Mechanical and electrical compatibility is maintained across these designations for the LAN8710 series.

Q: Are there differences in ECCN classification between substitute parts?

A: LAN8710A-EZC and LAN8710AI-EZK are classified as ECCN 5A991B1, while LAN8710A-EZC-ABC is classified as EAR99. This distinction may affect export compliance requirements depending on destination and end-use.

Q: Can LAN8710A-EZK-TR be used in manual assembly processes?

A: LAN8710A-EZK-TR is supplied in Cut Tape and Digi-Reel format optimized for automated pick-and-place assembly. Manual assembly is possible but not the intended application format.

Q: Are all substitute parts in active production status?

A: All identified substitute parts maintain active product status with Microchip Technology.