LAL03NA101K Equivalent & Substitute Parts

Part Overview

The LAL03NA101K is a 100 µH unshielded axial inductor manufactured by Taiyo Yuden, rated for 90 mA maximum current with 7 Ohm maximum DC resistance. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing design requirements and procurement needs. Substitute parts must maintain the core electrical specifications while accommodating the constraints of active product availability.

Key Parameters

Parameter	Value	Unit
Inductance	100	µH
Inductance Tolerance	±10%	-
Current Rating	90	mA
DC Resistance (Maximum)	7	Ohm
Shielding	Unshielded	-
Mounting Type	Through Hole	-
Package Type	Axial	-
Operating Temperature Range	-25°C to 105°C	-
Frequency - Self Resonant	4.8	MHz

Substitute Part Grouping Explanation

Substitution of the LAL03NA101K is based on the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

Inductance value: 100 µH (fixed requirement)
Mounting type: Through hole axial configuration (mechanical compatibility)
Shielding classification: Unshielded (electromagnetic environment match)
Current rating: Must equal or exceed 90 mA
DC resistance: Must not exceed 7 Ohm maximum
Operating temperature range: Must encompass or exceed -25°C to 105°C
Package type: Axial (physical form factor)

The substitute part 78F101J-RC from Bourns Inc. satisfies these criteria with enhanced electrical performance characteristics and active product status.

Parameter Comparison

Parameter	LAL03NA101K (Taiyo Yuden)	78F101J-RC (Bourns Inc.)	Compatibility Assessment
Inductance	100 µH	100 µH	Equivalent
Inductance Tolerance	±10%	±5%	Substitute offers tighter tolerance
Current Rating	90 mA	165 mA	Substitute exceeds requirement
DC Resistance (Maximum)	7 Ohm	4.1 Ohm	Substitute performs better
Shielding	Unshielded	Unshielded	Equivalent
Mounting Type	Through Hole	Through Hole	Equivalent
Package Type	Axial	Axial	Equivalent
Operating Temperature Range	-25°C to 105°C	-55°C to 105°C	Substitute offers extended low-temperature range
Frequency - Self Resonant	4.8 MHz	5.5 MHz	Substitute offers higher resonant frequency
Q @ Frequency	50 @ 2.52 MHz	60 @ 2.5 MHz	Substitute offers higher quality factor

Engineering Selection Recommendations

The 78F101J-RC from Bourns Inc. is the qualified substitute for the obsolete LAL03NA101K. Selection rationale is based on the following factors:

Product Status: The LAL03NA101K is classified as obsolete, while the 78F101J-RC maintains active product status, ensuring long-term availability and supply chain continuity.

Electrical Compatibility: The substitute part meets or exceeds all critical electrical parameters. The 100 µH inductance value is identical, current rating of 165 mA exceeds the 90 mA requirement, and DC resistance of 4.1 Ohm is superior to the 7 Ohm maximum specification.

Mechanical Compatibility: Both components utilize through-hole axial mounting with identical package classification, ensuring direct physical compatibility in existing circuit board layouts.

Compliance Status: The 78F101J-RC is RoHS3 compliant and REACH unaffected, meeting modern regulatory requirements. Both parts carry EAR99 ECCN classification.

Performance Enhancement: The substitute part provides improved electrical characteristics including tighter inductance tolerance (±5% versus ±10%), lower DC resistance, higher quality factor, and extended operating temperature range (-55°C to 105°C versus -25°C to 105°C).

Frequently Asked Questions (FAQ)

Q: Can the 78F101J-RC directly replace the LAL03NA101K in existing designs?

A: Yes. Both components are 100 µH unshielded axial through-hole inductors with identical package classification. The substitute meets all minimum electrical requirements and provides superior performance characteristics.

Q: What are the physical dimension differences between these parts?

A: The LAL03NA101K measures 0.102" diameter × 0.276" length (2.60mm × 7.00mm). The 78F101J-RC measures 0.110" diameter × 0.280" length (2.79mm × 7.11mm). These minor dimensional variations are within typical through-hole component tolerances and do not affect circuit board compatibility.

Q: Does the lower DC resistance of the substitute part affect circuit operation?

A: The 78F101J-RC DC resistance of 4.1 Ohm is lower than the LAL03NA101K specification of 7 Ohm maximum. Lower DC resistance reduces power dissipation and heat generation, providing improved performance in the same application.

Q: Are there any frequency-dependent considerations for substitution?

A: The 78F101J-RC exhibits a higher self-resonant frequency (5.5 MHz versus 4.8 MHz) and higher quality factor (60 @ 2.5 MHz versus 50 @ 2.52 MHz). These characteristics indicate improved high-frequency performance and lower losses at the test frequency.

Q: What is the significance of the extended temperature range in the substitute part?

A: The 78F101J-RC operates from -55°C to 105°C, compared to the LAL03NA101K range of -25°C to 105°C. The extended low-temperature capability provides additional operational margin for applications requiring operation in cold environments.

Q: How do the inductance tolerances compare?

A: The LAL03NA101K specifies ±10% tolerance, while the 78F101J-RC specifies ±5% tolerance. The tighter tolerance of the substitute part provides improved inductance value consistency across production batches.

Q: Is the substitute part available in the same packaging format?

A: Yes. Both components are supplied in axial through-hole package format. The 78F101J-RC is available in bulk packaging, consistent with standard component procurement practices.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message