L717TSB25POL2 D-Sub 25 Position Plug Connector - Equivalent & Substitute Parts

Part Overview

The L717TSB25POL2 is a 25 Position D-Sub Plug connector manufactured by Amphenol ICC (Commercial Products). This through-hole solder termination connector features male pins in a 2-row configuration with Shell Size 3 (DB, B) layout. The connector is actively produced and stocked with 1055 units in inventory. Equivalent and substitute parts are identified based on matching electrical and mechanical parameters including connector style, position count, mounting type, termination method, and environmental ratings. Alternative models are necessary to support supply chain flexibility, packaging preferences, and specific flange feature requirements.

Substiute Parts

L717TSB25POL2

Amphenol ICC (Commercial Products)In Stock: 1146L717TSB25POL2 Datasheet

Current PartRFQ

09653616713

HARTINGIn Stock: 120409653616713 Datasheet

SimilarRFQ

09653617713

HARTINGIn Stock: 93809653617713 Datasheet

SimilarRFQ

2-338311-2

TE Connectivity AMP ConnectorsIn Stock: 8662-338311-2 Datasheet

SimilarRFQ

D25P24A4GX00LF

Amphenol ICC (FCI)In Stock: 1416D25P24A4GX00LF Datasheet

SimilarRFQ

D25P24A4PL00LF

Amphenol ICC (FCI)In Stock: 1007D25P24A4PL00LF Datasheet

SimilarRFQ

D25P24B4GV00LF

Amphenol ICC (FCI)In Stock: 1298D25P24B4GV00LF Datasheet

SimilarRFQ

D25P24B6GV00LF

Amphenol ICC (FCI)In Stock: 1308D25P24B6GV00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the L717TSB25POL2 are qualified based on the following core parameters that determine functional and mechanical compatibility:

Primary Matching Criteria:

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 25
• Number of Rows: 2
• Shell Size, Connector Layout: 3 (DB, B)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Type: Signal
• Material Flammability Rating: UL94 V-0
• Operating Temperature Range: -55°C ~ 125°C

Secondary Compatibility Factors:

• Current Rating: 5A or higher
• Voltage Rating: 300V or higher
• Contact Material: Copper Alloy or Phosphor Bronze
• Dielectric Material: Thermoplastic or Polyester-based compounds
• Moisture Sensitivity Level: 1 (Unlimited)

Flange Feature Variations: Substitute parts differ in flange configuration (Housing/Shell unthreaded, Housing/Shell with 4-40 threads, Mating Side Female Screwlock, or Board Side M3). These variations do not affect electrical compatibility but determine mechanical mounting interface requirements.

Parameter Comparison

Engineering Selection Recommendations

Amphenol ICC (FCI) Delta D Series - Primary Substitutes:

The D25P24 series parts (D25P24B6GV00LF, D25P24A4PL00LF, D25P24A4GX00LF, D25P24B4GV00LF) are direct functional equivalents to the L717TSB25POL2. All maintain the same 25-position, 2-row D-Sub configuration with through-hole solder termination and -55°C to 125°C operating range. These parts differ only in flange feature design and shell finish (Tin-Nickel versus Tin Plated). Selection among these variants depends on specific mounting interface requirements:

• D25P24A4PL00LF: Housing/Shell with M3 mounting holes
• D25P24A4GX00LF: Housing/Shell with 4-40 mounting holes
• D25P24B4GV00LF: Mating side female screwlock (4-40)
• D25P24B6GV00LF: Mating side female screwlock (4-40) with specified gold plating thickness

All Amphenol ICC (FCI) substitutes carry RoHS or RoHS3 compliance and MSL 1 rating.

HARTING 09653616713 and 09653617713:

These HARTING connectors provide functional equivalence with higher current rating (6.5A versus 5A). Both feature mating side female screwlock (4-40) configuration and ROHS3 compliance. The primary difference is packaging: 09653616713 is supplied in Tray; 09653617713 is supplied in Bulk. Contact finish specifications are not provided for these parts.

TE Connectivity 2-338311-2 (AMPLIMITE HDP-20 Series):

This part provides functional equivalence with board side M3 mounting configuration and 6A current rating. Operating temperature range is limited to -55°C to 105°C (5°C lower maximum than the main part). Voltage rating is 125V (significantly lower than the main part's 600V). This part is suitable only for applications where the reduced voltage and temperature specifications are acceptable. ROHS3 compliance and REACH Affected status apply.

Selection Criteria Summary:

1. Verify flange feature compatibility with PCB or housing mounting interface
2. Confirm current and voltage requirements do not exceed substitute part ratings
3. For applications requiring full -55°C to 125°C range, avoid TE Connectivity 2-338311-2
4. For applications requiring 600V rating, use only L717TSB25POL2 or Amphenol ICC (FCI) Delta D series
5. Packaging preference (Tray versus Bulk) determines HARTING variant selection

Frequently Asked Questions (FAQ)

Q: Can D25P24B6GV00LF replace L717TSB25POL2 in all applications?

A: D25P24B6GV00LF is electrically and mechanically compatible for applications requiring 300V or less. The main difference is flange feature (mating side female screwlock versus unthreaded housing). Verify your PCB or housing mounting interface accepts the screwlock configuration before substitution.

Q: What is the difference between D25P24A4PL00LF and D25P24A4GX00LF?

A: Both are Delta D series 25-position D-Sub plugs with identical electrical specifications. The difference is mounting hole size: D25P24A4PL00LF uses M3 holes; D25P24A4GX00LF uses 4-40 holes. Select based on your PCB or housing mounting hole specification.

Q: Are HARTING 09653616713 and 09653617713 interchangeable?

A: Both parts are electrically identical 25-position D-Sub plugs with mating side female screwlock (4-40) configuration. The only difference is packaging: 09653616713 is Tray packaged; 09653617713 is Bulk packaged. Select based on your procurement and assembly requirements.

Q: Why does TE Connectivity 2-338311-2 have a lower voltage rating (125V)?

A: The 2-338311-2 is from the AMPLIMITE HDP-20 series, which is designed for different application requirements. This part is suitable only for applications where 125V maximum voltage is acceptable. For higher voltage applications, use L717TSB25POL2 or Amphenol ICC (FCI) Delta D series parts rated for 300V or 600V.

Q: Can I use HARTING 09653617713 (Bulk packaging) instead of 09653616713 (Tray packaging)?

A: Yes, both parts are functionally identical. The choice depends on your assembly process and inventory management. Tray packaging is typically preferred for automated pick-and-place assembly; Bulk packaging is suitable for manual assembly or wave soldering processes.

Q: What does "Mating Side, Female Screwlock (4-40)" mean?

A: This flange feature indicates the connector has threaded holes on the mating side (the side that connects to a mating connector) with 4-40 UNC threads. This allows the mating connector to be secured with screws. This differs from unthreaded housing or board-side mounting configurations.

Q: Is the L717TSB25POL2 RoHS compliant?

A: Yes, L717TSB25POL2 is RoHS Compliant. Most substitute parts carry RoHS or RoHS3 compliance. Verify compliance status for your specific application requirements.

Q: What is the operating temperature range difference between L717TSB25POL2 and 2-338311-2?

A: L717TSB25POL2 operates from -55°C to 125°C. The TE Connectivity 2-338311-2 operates from -55°C to 105°C. The 20°C difference in maximum temperature may be critical for high-temperature applications. Confirm your application's temperature requirements before selecting this substitute.

Q: Do all substitute parts have the same contact material?

A: No. L717TSB25POL2 uses Copper Alloy contacts. Amphenol ICC (FCI) Delta D series parts use Phosphor Bronze contacts. HARTING parts do not specify contact material. Phosphor Bronze provides superior spring characteristics and is generally preferred for high-cycle mating applications.

Q: What does "MSL 1 (Unlimited)" mean?

A: Moisture Sensitivity Level 1 indicates the component has unlimited shelf life and does not require special moisture-controlled storage or handling. All listed parts carry MSL 1 rating, eliminating moisture-related supply chain constraints.