Equivalent & Substitute Parts for L717DFEH09P1AMNVF2

Part Overview

The L717DFEH09P1AMNVF2 is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle solder-terminated connector features male pins with a DE/E shell size (Size 1) and is designed for panel mount and through-hole applications. The connector is currently in active production status with 943 pieces available in inventory.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where the primary part becomes unavailable or when alternative compliance certifications are required.

Substiute Parts

L717DFEH09P1AMNVF2

Amphenol ICC (Commercial Products)In Stock: 1047L717DFEH09P1AMNVF2 Datasheet

Current PartRFQ

DE09P564CTXLF

Amphenol ICC (FCI)In Stock: 953DE09P564CTXLF Datasheet

SimilarRFQ

DE09P565CTXLF

Amphenol ICC (FCI)In Stock: 1463DE09P565CTXLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the L717DFEH09P1AMNVF2 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector style: D-Sub
• Connector type: Plug with male pins
• Number of positions: 9
• Number of rows: 2
• Shell size and layout: 1 (DE, E)
• Mounting type: Right angle
• Termination method: Solder
• Shell material and finish: Steel, tin plated
• Contact type: Signal
• Material flammability rating: UL94 V-0

Allowable Variation Parameters:

• Current rating: Substitute parts rated at 5A per contact are acceptable for applications not exceeding this limit
• Operating temperature: Substitute parts with -55°C ~ 125°C range are acceptable for applications within this narrower window
• Contact finish thickness: Variations in gold plating thickness (flash vs. 20.0µin vs. 30.0µin) are acceptable provided gold finish is present
• Backset spacing: Minor variations (0.406" vs. 0.409") are within acceptable tolerance for D-Sub connectors
• RoHS compliance status: Substitutes with different RoHS certifications (RoHS Compliant, ROHS3 Compliant) are acceptable based on application requirements

The substitute parts DE09P564CTXLF and DE09P565CTXLF meet all mandatory matching parameters and are therefore qualified as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: L717DFEH09P1AMNVF2

Selection is appropriate for applications requiring the full operating temperature range of -55°C ~ 155°C and current capacity of 7.5A. This part carries RoHS non-compliant status and is suitable for legacy systems or applications where RoHS compliance is not mandated.

Substitute: DE09P565CTXLF

This part is recommended as the primary substitute when RoHS3 compliance is required. It matches the 300V voltage rating and provides equivalent electrical performance within the -55°C ~ 125°C operating range. The 30.0µin gold contact finish thickness exceeds the main part specification. Current rating of 5A is suitable for applications not exceeding this limit. REACH unaffected status provides additional regulatory clarity.

Substitute: DE09P564CTXLF

This part is acceptable as a secondary substitute when RoHS compliance (non-ROHS3) is required and voltage rating specification is not critical to the application. Operating temperature range is identical to DE09P565CTXLF at -55°C ~ 125°C. Current rating of 5A per contact applies the same limitation. REACH affected status requires verification for specific supply chain requirements.

Selection Criteria Summary:

• For temperature range above 125°C: Use L717DFEH09P1AMNVF2 only
• For current requirements above 5A: Use L717DFEH09P1AMNVF2 only
• For RoHS3 compliance: Use DE09P565CTXLF
• For RoHS compliance without ROHS3 requirement: Use DE09P564CTXLF or DE09P565CTXLF
• For REACH unaffected requirement: Use DE09P565CTXLF

Frequently Asked Questions (FAQ)

Q: Can DE09P564CTXLF or DE09P565CTXLF be used in applications currently using L717DFEH09P1AMNVF2?

A: Substitution is valid only when the application operates within the narrower temperature range (-55°C ~ 125°C) and current requirements do not exceed 5A. The substitute parts are mechanically and electrically compatible for 9-position D-Sub solder-terminated connections within these constraints.

Q: What is the difference between DE09P564CTXLF and DE09P565CTXLF?

A: Both parts are functionally equivalent 9-position D-Sub plugs with identical mechanical specifications. The primary differences are: (1) DE09P565CTXLF specifies 300V voltage rating while DE09P564CTXLF does not; (2) DE09P565CTXLF carries ROHS3 compliance and REACH unaffected status, while DE09P564CTXLF carries RoHS compliance and REACH affected status; (3) contact finish thickness differs (30.0µin vs. flash). Selection between these two depends on regulatory requirements and voltage specification needs.

Q: Why does the main part L717DFEH09P1AMNVF2 have a higher current rating than the substitutes?

A: The main part is rated at 7.5A while substitutes are rated at 5A per contact. This difference reflects different design specifications and contact material composition. Applications requiring current above 5A must use the main part L717DFEH09P1AMNVF2.

Q: Are there packaging differences between these parts?

A: The main part L717DFEH09P1AMNVF2 packaging is not specified in the provided data. Substitute parts DE09P564CTXLF and DE09P565CTXLF are supplied in Tray packaging. Packaging compatibility should be verified against assembly line requirements.

Q: What does the backset spacing difference (0.406" vs. 0.409") mean for compatibility?

A: Backset spacing refers to the distance from the connector mounting face to the contact plane. The 0.003" (0.10mm) difference between the main part and substitutes is within standard D-Sub connector tolerances and does not affect mechanical or electrical compatibility for standard applications.

Q: Can I use these substitutes in high-temperature applications above 125°C?

A: No. The substitute parts DE09P564CTXLF and DE09P565CTXLF are rated only to 125°C maximum operating temperature. Applications requiring operation above 125°C must use the main part L717DFEH09P1AMNVF2, which is rated to 155°C.

Q: What is GXT™ contact finish on the substitute parts?

A: GXT™ is a proprietary gold plating specification used by Amphenol ICC (FCI). The substitute parts specify gold finish with GXT™ designation, indicating enhanced contact performance characteristics. This is compatible with standard gold-plated connector applications.

Q: Are all three parts suitable for solder termination?

A: Yes. All three parts—L717DFEH09P1AMNVF2, DE09P564CTXLF, and DE09P565CTXLF—use solder termination and are compatible with standard PCB assembly processes.