L717DFEG09P1AMN D-Sub Connector: Equivalent & Substitute Parts

Part Overview

The L717DFEG09P1AMN is a 9-position D-Sub plug connector with right-angle solder termination, manufactured by Amphenol ICC (Commercial Products). This is an active product with 1152 units in stock. The connector is designed for panel-mount, through-hole applications requiring robust signal connectivity in industrial and commercial environments. Alternative equivalent parts may be required due to inventory constraints, supply chain disruptions, design revisions, or specific application requirements such as contact material preferences, flange configurations, or manufacturer-specific certifications.

Substiute Parts

L717DFEG09P1AMN

Amphenol ICC (Commercial Products)In Stock: 1252L717DFEG09P1AMN Datasheet

Current PartRFQ

09661627816

HARTINGIn Stock: 111209661627816 Datasheet

SimilarRFQ

DE09P564CTXLF

Amphenol ICC (FCI)In Stock: 953DE09P564CTXLF Datasheet

SimilarRFQ

DE09P565CTXLF

Amphenol ICC (FCI)In Stock: 1463DE09P565CTXLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility is determined by strict alignment across the following critical parameters:

• Physical Form: Connector style (D-Sub), type (Plug, Male Pins), position count (9), row configuration (2)
• Mechanical Interface: Shell size/layout (Size 1 DE/E), mounting type (right angle, through hole), termination method (solder)
• Electrical Performance: Current rating (5A–7.5A), voltage rating (300V reference), operating temperature range (-55°C ~ 125°C)
• Material & Safety: UL94 V-0 flammability rating, RoHS compliance status
• Environmental: MSL 1 (Unlimited moisture sensitivity), REACH status

The following parts meet these criteria and are qualified substitutes for the L717DFEG09P1AMN:

1. 09661627816 (HARTING) — Matches core D-Sub 9-position right-angle solder configuration, UL94 V-0, MSL 1, operating range -55°C ~ 125°C
2. DE09P564CTXLF (Amphenol ICC FCI) — Size 1 (DE/E) D-Sub plug, 9-position, right angle, UL94 V-0, MSL 1, -55°C ~ 125°C, 5A per contact
3. DE09P565CTXLF (Amphenol ICC FCI) — Size 1 (DE/E) D-Sub plug, 9-position, right angle, UL94 V-0, MSL 1, -55°C ~ 125°C, 5A rating, 300V voltage specification

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: DE09P565CTXLF

This part maintains full specification alignment with the L717DFEG09P1AMN across all critical parameters. Both parts are rated for 300V operation, UL94 V-0 material compliance, and ROHS3/RoHS compliance. The 5A per-contact rating in DE09P565CTXLF is suitable for 9-position applications within the original 300V specification envelope. Inventory availability is highest for this part (1448 pcs).

Secondary Substitute: DE09P564CTXLF

This part meets the core mechanical and safety requirements with UL94 V-0 compliance and -55°C ~ 125°C operating range. The 5A per-contact rating requires verification against specific circuit current demands. No explicit voltage rating is specified for this part.

Tertiary Substitute: 09661627816

This HARTING connector maintains mechanical compatibility and meets safety (UL94 V-0) and environmental (MSL 1) specifications. The 7.5A current rating matches the original part. Voltage rating is not specified, requiring circuit-level validation. The flange configuration differs (4-40 housing/shell mount versus M3 board-side mount on the original).

Frequently Asked Questions (FAQ)

Q: Can DE09P565CTXLF replace L717DFEG09P1AMN in all applications?

A: Yes, for applications within the 300V, -55°C ~ 125°C operating envelope. Both parts carry identical shell size (Size 1 DE/E), connector type (9-position D-Sub plug), mounting style (right-angle solder through-hole), and safety ratings (UL94 V-0, MSL 1). The 5A per-contact specification is equivalent to the 7.5A system rating across the 9-position connector.

Q: What is the difference between the contact finish specifications?

A: The L717DFEG09P1AMN specifies 20.0µin (0.51µm) gold plating on brass contacts. DE09P565CTXLF and DE09P564CTXLF specify gold with GXT™ coating at 30.0µin (0.76µm) and flash thickness respectively. These variations do not affect mechanical or electrical substitution compatibility.

Q: Does the difference in flange mounting (M3 vs. 4-40 housing/shell) affect compatibility?

A: The original L717DFEG09P1AMN uses M3 board-side flange, while 09661627816 uses 4-40 housing/shell flange. These mounting points differ mechanically and require different bracket or fastening hardware. Circuit-level connectivity (pin positions, signal routing) remains unchanged. Mechanical redesign may be required.

Q: Is ROHS3 compliance equivalent to RoHS compliance?

A: ROHS3 (Directive 2011/65/EU as amended) represents the current and expanded RoHS standard. ROHS3 compliance is fully backward-compatible with applications requiring RoHS compliance. All substitute parts meet this requirement.

Q: What is the significance of MSL 1 (Unlimited) rating?

A: MSL 1 indicates unlimited shelf life and storage without moisture reflow requirements. All listed parts carry this rating, allowing equivalent handling and storage conditions without additional drying or baking procedures prior to soldering.

Q: Can I substitute based on backset spacing differences?

A: The L717DFEG09P1AMN specifies 0.406" (10.30mm) backset spacing. DE09P565CTXLF and DE09P564CTXLF specify 0.409" (10.40mm). This 0.003" (0.10mm) difference may require PCB layout validation to ensure sufficient clearance for the connector body during insertion and mating cycles.