L717DEG09P1APN D-Sub Plug 9 Position Right Angle Solder Connector

Part Overview

The L717DEG09P1APN is a 9 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with male pins, right angle mounting, and solder termination. This connector is designed for through-hole PCB applications requiring signal transmission in industrial and commercial equipment. The part maintains active product status with 788 units in current inventory.

Equivalent and substitute parts are necessary when original stock becomes unavailable, when alternative manufacturers are preferred for supply chain diversification, or when design requirements permit selection from qualified alternatives meeting identical electrical and mechanical specifications.

Substiute Parts

L717DEG09P1APN

Amphenol ICC (Commercial Products)In Stock: 799L717DEG09P1APN Datasheet

Current PartRFQ

09661627816

HARTINGIn Stock: 111209661627816 Datasheet

SimilarRFQ

DE09P564CTXLF

Amphenol ICC (FCI)In Stock: 953DE09P564CTXLF Datasheet

SimilarRFQ

DE09P565CTXLF

Amphenol ICC (FCI)In Stock: 1463DE09P565CTXLF Datasheet

SimilarRFQ

DE09P565MTXLF

Amphenol ICC (FCI)In Stock: 815DE09P565MTXLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the L717DEG09P1APN is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 9
• Number of Rows: 2
• Shell Size, Connector Layout: 1 (DE, E)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Type: Signal
• Material Flammability Rating: UL94 V-0
• Operating Temperature Range: -55°C ~ 125°C
• Moisture Sensitivity Level: 1 (Unlimited)

All four substitute parts listed (09661627816, DE09P564CTXLF, DE09P565CTXLF, DE09P565MTXLF) meet these mandatory parameters. Variations in contact finish specifications, current ratings, and flange features represent acceptable design alternatives within the D-Sub 9 position plug category and do not preclude functional substitution.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts maintain active product status and comply with RoHS requirements. Selection among these alternatives is based on specific application requirements and compliance certifications:

L717DEG09P1APN (Primary Part): Amphenol ICC Commercial Products variant with 7.5A current rating, brass contacts with 8.00µin gold finish, and board-side M3 flange mounting. RoHS Compliant status. Suitable for applications requiring maximum current capacity and board-side mounting configuration.

09661627816 (HARTING): Equivalent 7.5A current rating with copper alloy contacts. ROHS3 Compliant. Features board lock mechanism and 4-40 housing/shell flange. Provides alternative manufacturer sourcing with identical electrical performance.

DE09P564CTXLF (Amphenol ICC FCI): Reduced current rating of 5A per contact with GXT™ gold finish (flash thickness). RoHS Compliant. Unthreaded housing/shell flange. Suitable for lower current applications within the same connector family.

DE09P565CTXLF (Amphenol ICC FCI): 5A current rating with GXT™ gold finish (30.0µin thickness), 300V voltage rating specified. ROHS3 Compliant. Unthreaded housing/shell flange. Highest inventory availability (1448 units).

DE09P565MTXLF (Amphenol ICC FCI): 5A per contact rating with GXT™ gold finish (30.0µin thickness), 300V voltage rating, and mounting brackets feature. RoHS Compliant. Unthreaded housing/shell flange. Combines reduced current rating with mounting bracket functionality.

Frequently Asked Questions (FAQ)

Q: Can DE09P564CTXLF or DE09P565CTXLF be used as direct replacements for L717DEG09P1APN in high-current applications?

A: No. The L717DEG09P1APN supports 7.5A current rating, while DE09P564CTXLF and DE09P565CTXLF are rated for 5A. Applications requiring the full 7.5A capacity must use either the original L717DEG09P1APN or the 09661627816 (HARTING) substitute, both rated for 7.5A.

Q: What is the difference between the flange mounting options across these parts?

A: L717DEG09P1APN features board-side M3 threaded flange mounting. The 09661627816 uses 4-40 housing/shell threaded flange. DE09P564CTXLF, DE09P565CTXLF, and DE09P565MTXLF use unthreaded housing/shell flanges. Flange type selection depends on PCB mounting hole specifications and mechanical assembly requirements.

Q: Are all substitute parts compatible with the same PCB footprint as L717DEG09P1APN?

A: All parts share identical connector style (D-Sub), position count (9), row configuration (2), shell size (1 DE/E), and mounting type (through-hole right angle). However, backset spacing varies slightly: L717DEG09P1APN at 0.406" (10.30mm) versus 0.409" (10.40mm) for the FCI variants. Flange mounting hole patterns differ based on flange type. PCB layout verification is required for mechanical fit.

Q: What is the significance of the GXT™ gold finish on the FCI variants?

A: GXT™ represents a proprietary gold plating specification. DE09P564CTXLF uses flash thickness, while DE09P565CTXLF and DE09P565MTXLF use 30.0µin (0.76µm) thickness. The original L717DEG09P1APN specifies 8.00µin (0.203µm) thickness. These variations represent different contact finish specifications within acceptable D-Sub connector standards.

Q: Which substitute part offers the best inventory availability?

A: DE09P565CTXLF maintains the highest inventory level at 1448 units, compared to 788 units for the original L717DEG09P1APN. However, inventory levels are subject to change and should be confirmed at time of procurement.

Q: Are there compliance differences between RoHS Compliant and ROHS3 Compliant designations among these parts?

A: Both designations indicate RoHS compliance. ROHS3 represents a more recent compliance certification standard. All parts listed meet RoHS requirements and are suitable for applications requiring RoHS-compliant components.

Q: Can L717DEG09P1APN be substituted with DE09P565MTXLF if mounting brackets are required?

A: Yes. DE09P565MTXLF includes mounting brackets as a standard feature, matching the bracket functionality of L717DEG09P1APN. However, the current rating is reduced to 5A per contact. This substitution is valid only for applications not requiring the full 7.5A capacity of the original part.

Q: What contact material differences exist between these connectors?

A: L717DEG09P1APN uses brass contacts, while all substitute parts use copper alloy contacts. Both materials are standard for D-Sub signal connectors and provide equivalent electrical performance within the specified operating parameters.