L601E8 TRIAC Logic - Sensitive Gate 600V 1A TO-92 Equivalent & Substitute Parts

Part Overview

The L601E8 is a TRIAC Logic - Sensitive Gate thyristor rated for 600V off-state voltage and 1A on-state current (RMS), housed in a Through Hole TO-92 package. Manufactured by Littelfuse Inc., this component is Active in product status with full ROHS3 compliance. Substitute parts are identified based on matching electrical specifications and mechanical compatibility within the TRIAC Logic - Sensitive Gate category, ensuring functional equivalence in circuit applications requiring 600V thyristor switching capability.

Key Parameters

Parameter	L601E8 Specification
Triac Type	Logic - Sensitive Gate
Voltage - Off State	600 V
Current - On State (It (RMS)) (Max)	1 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V
Current - Gate Trigger (Igt) (Max)	10 mA
Current - Hold (Ih) (Max)	15 mA
Operating Temperature Range	-65°C ~ 125°C (TJ)
Mounting Type	Through Hole
Package / Case	TO-226-3, TO-92-3 (TO-226AA)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the L601E8 are grouped into two categories based on electrical parameter alignment:

Category 1: Parametric Equivalents (Full Electrical Match) Parts matching all critical electrical parameters: 600V off-state voltage, 1A on-state current, 1.3V gate trigger voltage, and Logic - Sensitive Gate configuration. These parts maintain identical functional characteristics and are directly interchangeable in circuit design.

Category 2: Manufacturer Recommended Substitutes (Controlled Parameter Variance) Parts with minor deviations in gate trigger current (Igt), hold current (Ih), or non-repetitive surge current specifications, while maintaining core voltage and current ratings. These parts are suitable for applications where the specific gate drive characteristics of the L601E8 are not critical design constraints.

Key parameters determining substitution eligibility:

Voltage - Off State: 600V (mandatory)
Current - On State (It (RMS)): 1A (mandatory)
Voltage - Gate Trigger (Vgt): 1.3V (mandatory)
Triac Type: Logic - Sensitive Gate (mandatory)
Mounting Type: Through Hole (mandatory)
Package / Case: TO-92 or TO-92-3 compatible (mandatory)

Parameter Comparison

Part Number	Manufacturer	Voltage - Off State	Current - On State (Max)	Voltage - Gate Trigger (Max)	Current - Gate Trigger (Max)	Current - Hold (Max)	Operating Temperature	Package	Product Status
L601E8	Littelfuse Inc.	600 V	1 A	1.3 V	10 mA	15 mA	-65°C ~ 125°C	TO-92-3	Active
Q601E3	Littelfuse Inc.	600 V	1 A	1.3 V	10 mA	15 mA	-65°C ~ 125°C	TO-92-3	Active
Z00607MA 5BL2	STMicroelectronics	600 V	800 mA	1.3 V	5 mA	5 mA	-40°C ~ 110°C	TO-92-3	Active
Z0103MA 1AA2	STMicroelectronics	600 V	1 A	1.3 V	3 mA	7 mA	-40°C ~ 125°C	TO-92-3	Active
Z0103MA 2AL2	STMicroelectronics	600 V	1 A	1.3 V	3 mA	7 mA	-40°C ~ 125°C	TO-92-3	Active
Z0103MA 5AL2	STMicroelectronics	600 V	1 A	1.3 V	3 mA	7 mA	-40°C ~ 125°C	TO-92-3	Active
Z0107MA 1AA2	STMicroelectronics	600 V	1 A	1.3 V	5 mA	10 mA	-40°C ~ 125°C	TO-92-3	Active
Z0109MA 1AA2	STMicroelectronics	600 V	1 A	1.3 V	10 mA	10 mA	-40°C ~ 125°C	TO-92-3	Active
Z0109MA 2AL2	STMicroelectronics	600 V	1 A	1.3 V	10 mA	10 mA	-40°C ~ 125°C	TO-92	Active
Z0109MA 5AL2	STMicroelectronics	600 V	1 A	1.3 V	10 mA	10 mA	-40°C ~ 125°C	TO-92	Active

Engineering Selection Recommendations

All listed substitute parts maintain Active product status with ROHS3 compliance and REACH Unaffected certification, meeting regulatory requirements equivalent to the L601E8.

Direct Replacement (Identical Specifications): Q601E3 (Littelfuse Inc.) provides identical electrical and thermal specifications to the L601E8, with matching gate trigger and hold current characteristics. This part is the primary equivalent for direct substitution without circuit redesign.

Functional Equivalents (600V, 1A Core Ratings): Z0103MA series (Z0103MA 1AA2, Z0103MA 2AL2, Z0103MA 5AL2), Z0107MA 1AA2, Z0109MA 1AA2, Z0109MA 2AL2, and Z0109MA 5AL2 maintain the 600V off-state voltage and 1A on-state current specifications. These parts differ in gate trigger current (Igt) and hold current (Ih) characteristics. Z0109MA variants match the L601E8 gate trigger current specification (10 mA), making them suitable for applications with identical gate drive requirements.

Reduced Current Rating Substitute: Z00607MA 5BL2 (STMicroelectronics) is rated for 800 mA on-state current, below the L601E8 1A specification. This part is suitable only for applications where the actual load current does not exceed 800 mA, despite the L601E8 design rating.

All substitute parts are available in Through Hole TO-92 or TO-92-3 packages, maintaining mechanical compatibility with L601E8 PCB footprints.

Frequently Asked Questions (FAQ)

Q: Can Q601E3 replace L601E8 without any circuit modifications? A: Yes. Q601E3 is a parametric equivalent with identical voltage, current, gate trigger, and hold current specifications. Direct substitution is supported.

Q: What is the difference between Z0109MA variants and the L601E8? A: Z0109MA 1AA2, Z0109MA 2AL2, and Z0109MA 5AL2 match the L601E8 gate trigger current (10 mA) and maintain 600V/1A ratings. The primary difference is operating temperature range (-40°C to 125°C versus -65°C to 125°C for L601E8) and packaging format (Bulk or Cut Tape versus Bulk for L601E8).

Q: Is Z00607MA 5BL2 suitable for all L601E8 applications? A: No. Z00607MA 5BL2 is rated for 800 mA maximum on-state current, compared to L601E8's 1A rating. Use this part only in applications where actual load current remains below 800 mA.

Q: What are the packaging differences among substitute parts? A: L601E8 is supplied in Bulk packaging. Substitute parts are available in Bulk, Cut Tape (CT), or Cut Tape with formed leads. All maintain TO-92 or TO-92-3 Through Hole package compatibility for PCB mounting.

Q: Do all substitute parts meet the same compliance standards as L601E8? A: Yes. All listed substitute parts are ROHS3 Compliant and REACH Unaffected, matching the L601E8 regulatory status.

Q: Which substitute part has the closest gate drive characteristics to L601E8? A: Z0109MA series (Z0109MA 1AA2, Z0109MA 2AL2, Z0109MA 5AL2) matches the L601E8 gate trigger current specification of 10 mA, providing identical gate drive behavior.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message