Request Quote
(Ships tomorrow)
L6008R6 TRIAC Equivalent & Substitute Parts
Part Overview
The L6008R6 is a Logic-Sensitive Gate TRIAC manufactured by Littelfuse Inc., rated for 600V off-state voltage and 8A on-state current in a TO-220-3 through-hole package. This component is discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing design support and procurement. The part operates across a temperature range of -40°C to 110°C and is RoHS3 compliant with MSL Level 1 rating.
Substiute Parts
Key Parameters
| Parameter | L6008R6 Value |
|---|---|
| Triac Type | Logic - Sensitive Gate |
| Voltage - Off State | 600 V |
| Current - On State (It RMS Max) | 8 A |
| Voltage - Gate Trigger (Vgt Max) | 1.3 V |
| Current - Gate Trigger (Igt Max) | 5 mA |
| Current - Hold (Ih Max) | 10 mA |
| Current - Non Rep. Surge (50/60Hz) | 65A / 85A |
| Operating Temperature Range | -40°C ~ 110°C |
| Package / Case | TO-220-3 |
| Mounting Type | Through Hole |
Substitute Part Grouping Explanation
Substitution eligibility is determined by strict alignment with the following critical parameters:
- Voltage Rating (Off State): Must be 600V minimum
- Triac Type: Must be Logic - Sensitive Gate configuration
- Package / Case: Must be TO-220-3 through-hole
- Gate Trigger Characteristics: Vgt and Igt values must be compatible with existing gate drive circuitry
- On-State Current Rating: Determines load-carrying capability; higher ratings provide design margin
Substitute parts are grouped into two categories based on on-state current rating:
Category A (8A Rating - Direct Current Match): BTA08-600TWRG, BTB08-600TWRG
- Identical 8A on-state current specification
- Matching Vgt (1.3V) and Igt (5mA) gate trigger parameters
- Suitable for direct replacement in existing designs
Category B (12A Rating - Higher Current Capability): BT138-600D,127, BTA312-600D,127, T1210T-6I
- Higher 12A on-state current rating provides increased load capacity
- Vgt values of 1.3V to 1.5V remain within acceptable gate drive range
- Igt values of 5mA to 10mA compatible with standard gate drive circuits
- Suitable for designs requiring enhanced current margin or upgraded performance
Parameter Comparison
| Part Number | Manufacturer | Voltage - Off State | Current - On State (It RMS Max) | Vgt Max (V) | Igt Max (mA) | Ih Max (mA) | Operating Temp Range | Package | Product Status |
|---|---|---|---|---|---|---|---|---|---|
| L6008R6 | Littelfuse Inc. | 600V | 8A | 1.3 | 5 | 10 | -40°C ~ 110°C | TO-220-3 | Discontinued |
| BTA08-600TWRG | STMicroelectronics | 600V | 8A | 1.3 | 5 | 10 | -40°C ~ 125°C | TO-220-3 | Active |
| BTB08-600TWRG | STMicroelectronics | 600V | 8A | 1.3 | 5 | 10 | -40°C ~ 125°C | TO-220-3 | Active |
| BT138-600D,127 | NXP USA Inc. | 600V | 12A | 1.5 | 5 | 10 | -40°C ~ 125°C | TO-220-3 | Active |
| BTA312-600D,127 | WeEn Semiconductors | 600V | 12A | 1.5 | 5 | 10 | -40°C ~ 125°C | TO-220-3 | Active |
| T1210T-6I | STMicroelectronics | 600V | 12A | 1.3 | 10 | 10 | -40°C ~ 125°C | TO-220-3 | Active |
Engineering Selection Recommendations
For Direct Replacement (Identical Electrical Performance)
BTA08-600TWRG and BTB08-600TWRG are functionally equivalent to L6008R6, maintaining identical on-state current (8A), gate trigger voltage (1.3V), and gate trigger current (5mA) specifications. Both parts are manufactured by STMicroelectronics with Active product status, RoHS3 compliance, and extended operating temperature range to 125°C. These parts are suitable for designs where the original 8A rating is specified and no performance upgrade is required.
For Enhanced Current Capability
BT138-600D,127, BTA312-600D,127, and T1210T-6I provide 12A on-state current rating, offering increased design margin for applications approaching the 8A limit. All three maintain 600V voltage rating and TO-220-3 package compatibility. BT138-600D,127 (NXP) and BTA312-600D,127 (WeEn) feature matching 1.5V gate trigger voltage, while T1210T-6I (STMicroelectronics) maintains the original 1.3V specification. All substitute parts are Active status with RoHS compliance and 125°C maximum operating temperature.
Compliance and Availability
All substitute parts meet RoHS3 or RoHS compliance requirements and carry MSL Level 1 rating. Inventory availability ranges from 959 to 10,300 units across substitute options, ensuring procurement feasibility for production volumes.
Frequently Asked Questions (FAQ)
Q: Can BTA08-600TWRG or BTB08-600TWRG be used as direct replacements for L6008R6?
A: Yes. Both parts are electrically and mechanically equivalent, with identical 8A on-state current, 1.3V gate trigger voltage, 5mA gate trigger current, and TO-220-3 package. The extended operating temperature range (-40°C to 125°C versus -40°C to 110°C) provides additional thermal margin.
Q: What is the difference between the 8A and 12A substitute options?
A: The 8A options (BTA08-600TWRG, BTB08-600TWRG) maintain the original current rating for designs with established thermal and circuit analysis. The 12A options (BT138-600D,127, BTA312-600D,127, T1210T-6I) provide 50% higher current capacity, suitable for applications requiring increased load margin or future design upgrades.
Q: Are gate trigger parameters compatible across all substitutes?
A: Gate trigger voltage (Vgt) ranges from 1.3V to 1.5V across substitutes, and gate trigger current (Igt) ranges from 5mA to 10mA. These variations remain within standard gate drive circuit tolerances. Designs using standard optocoupler or microcontroller gate drive circuits will function with all listed substitutes.
Q: Do all substitutes use the same TO-220-3 package?
A: Yes. All substitute parts use TO-220-3 through-hole package with identical pin configuration and PCB footprint compatibility. Mechanical mounting and thermal interface requirements are equivalent.
Q: Which substitute offers the best long-term availability?
A: T1210T-6I (STMicroelectronics) shows the highest inventory level at 10,300 units, indicating strong production support and long-term availability. BTA08-600TWRG and BTB08-600TWRG (both STMicroelectronics) also demonstrate active production status with substantial inventory.
Q: Are all substitutes RoHS compliant?
A: Yes. All substitute parts are RoHS3 or RoHS compliant with MSL Level 1 moisture sensitivity rating, meeting current environmental and reliability standards.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts


