L6004R8 Equivalent & Substitute Parts

Part Overview

The L6004R8 is a Logic - Sensitive Gate TRIAC rated for 600 V off-state voltage and 4 A on-state current (RMS), housed in a TO-220-3 through-hole package. Manufactured by Littelfuse, this component is discontinued at DiGi Electronics. Due to its discontinued status, identifying equivalent substitute parts with matching electrical and mechanical specifications is essential for design continuity and procurement planning.

Substiute Parts

L6004R8
LittelfuseIn Stock: 779L6004R8 Datasheet
L6004R8
Current Part
BTB04-600SL
STMicroelectronicsIn Stock: 177489BTB04-600SL Datasheet
BTB04-600SL
MFR Recommended

Key Parameters

Parameter Value
Triac Type Logic - Sensitive Gate
Voltage - Off State 600 V
Current - On State (It (RMS)) (Max) 4 A
Voltage - Gate Trigger (Vgt) (Max) 1.3 V
Current - Gate Trigger (Igt) (Max) 10 mA
Current - Hold (Ih) (Max) 15 mA
Configuration Single
Mounting Type Through Hole
Package / Case TO-220-3
RoHS Status ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the L6004R8 is determined by strict equivalence across the following electrical and mechanical parameters:

  • Triac Type: Logic - Sensitive Gate configuration
  • Voltage Rating: 600 V off-state voltage
  • Current Rating: 4 A on-state current (RMS)
  • Gate Trigger Specifications: Vgt (Max) 1.3 V and Igt (Max) 10 mA
  • Hold Current: 15 mA maximum
  • Package: TO-220-3 through-hole configuration
  • Compliance: ROHS3 Compliant

The BTB04-600SL meets all these criteria and qualifies as a direct substitute.

Parameter Comparison

Parameter L6004R8 (Littelfuse) BTB04-600SL (STMicroelectronics)
Triac Type Logic - Sensitive Gate Logic - Sensitive Gate
Voltage - Off State 600 V 600 V
Current - On State (It (RMS)) (Max) 4 A 4 A
Voltage - Gate Trigger (Vgt) (Max) 1.3 V 1.3 V
Current - Gate Trigger (Igt) (Max) 10 mA 10 mA
Current - Hold (Ih) (Max) 15 mA 15 mA
Configuration Single Single
Operating Temperature -40°C ~ 110°C (TJ) -40°C ~ 125°C (TJ)
Mounting Type Through Hole Through Hole
Package / Case TO-220-3 TO-220-3
Current - Non Rep. Surge 50, 60Hz (Itsm) 33A, 40A 35A, 38A
RoHS Status ROHS3 Compliant ROHS3 Compliant
Product Status Discontinued at DiGi Electronics Active

Engineering Selection Recommendations

The BTB04-600SL from STMicroelectronics is the qualified substitute for the discontinued L6004R8. Both components share identical electrical specifications for gate trigger voltage, gate trigger current, hold current, on-state current, and off-state voltage. Both are ROHS3 compliant and housed in the TO-220-3 package.

The BTB04-600SL offers an extended operating temperature range (-40°C to 125°C versus -40°C to 110°C) and is currently in active production with substantial inventory availability. The non-repetitive surge current specifications differ slightly but remain within acceptable tolerance for equivalent circuit operation.

Frequently Asked Questions (FAQ)

Q: Can the BTB04-600SL directly replace the L6004R8 in existing designs?

A: Yes. Both components share identical gate trigger specifications (Vgt 1.3 V max, Igt 10 mA max), hold current (15 mA max), on-state current (4 A RMS max), and off-state voltage (600 V). The TO-220-3 package pinout is identical, enabling direct board-level substitution.

Q: What is the difference in operating temperature range?

A: The L6004R8 operates from -40°C to 110°C junction temperature, while the BTB04-600SL extends to 125°C. This wider range in the substitute part provides additional thermal margin in high-temperature applications.

Q: Are there differences in surge current ratings?

A: The L6004R8 specifies 33A and 40A non-repetitive surge current for 50 Hz and 60 Hz respectively. The BTB04-600SL specifies 35A and 38A. Both values remain within typical application requirements for 4 A RMS rated TRIACs.

Q: Is the BTB04-600SL available in the same packaging?

A: Yes. Both components use the TO-220-3 through-hole package with identical mechanical dimensions and pin configuration.

Q: What is the compliance status of the substitute part?

A: The BTB04-600SL is ROHS3 compliant and carries REACH Unaffected status, matching the regulatory compliance of the original L6004R8.

Request Quote (Ships tomorrow)