L34S300D15 Hall Effect Current Sensor - Equivalent & Substitute Parts

Part Overview

The L34S300D15 is a Hall Effect current sensor manufactured by Tamura, designed for AC/DC current measurement applications requiring 300A sensing capability. This open-loop, bidirectional module delivers ratiometric voltage output with ±0.5% linearity across a DC to 50kHz frequency range. The part is classified as obsolete, making identification of active equivalent models essential for ongoing procurement and system maintenance. Substitute parts must maintain identical current-sensing specifications, output characteristics, and electrical performance parameters to ensure direct functional replacement without circuit redesign.

Key Parameters

Parameter	Value	Criticality for Substitution
Current Sensing Range	300A	Critical - Must Match Exactly
Sensor Type	Hall Effect, Open Loop	Critical - Defines Operating Principle
Output Type	Ratiometric, Voltage	Critical - Determines Circuit Compatibility
Polarization	Bidirectional	Critical - Enables AC/DC Measurement
Number of Channels	1	Critical - Single Channel Configuration
Frequency Response	DC ~ 50kHz	Important - Application Dependent
Linearity	±0.5%	Important - Measurement Accuracy
Response Time	5µs	Important - Dynamic Performance
Supply Voltage	±15V	Important - Power Requirements
Mounting Type	Panel Mount	Important - Physical Integration

Substitute Part Grouping Explanation

Substitute parts for the L34S300D15 are identified based on strict parameter matching within the Hall Effect current sensor category. The primary substitute, L34S300D15T, maintains all critical electrical specifications: 300A current sensing, Hall Effect open-loop topology, ratiometric voltage output, and bidirectional measurement capability.

Substitution logic is based on the following allowed parameters:

Current Sensing Capacity: 300A (non-negotiable)
Sensor Technology: Hall Effect, Open Loop (non-negotiable)
Output Configuration: Ratiometric Voltage (non-negotiable)
Measurement Capability: AC/DC Bidirectional (non-negotiable)
Channel Count: Single Channel (non-negotiable)
Frequency Range: Minimum DC to 25kHz (acceptable reduction from 50kHz)
Supply Voltage: ±12V to ±15V range (acceptable variation)
Operating Temperature: Extended range acceptable if minimum requirements met
Mounting: Chassis Mount acceptable alternative to Panel Mount for module-based sensors
Package Type: Module configuration with pass-through design

The L34S300D15T qualifies as a direct substitute despite minor parameter variations because it preserves all critical functional characteristics while offering active product status and improved temperature operating range.

Parameter Comparison

Parameter	L34S300D15 (Main Part)	L34S300D15T (Substitute)	Compatibility Assessment
Manufacturer	Tamura	Tamura	Identical
Current Sensing	300A	300A	Identical - Critical Match
Sensor Type	Hall Effect, Open Loop	Hall Effect, Open Loop	Identical - Critical Match
Output	Ratiometric, Voltage	Ratiometric, Voltage	Identical - Critical Match
Channels	1	1	Identical - Critical Match
Polarization	Bidirectional	Bidirectional	Identical - Critical Match
Frequency Range	DC ~ 50kHz	DC ~ 25kHz	Acceptable - Reduced but sufficient for most applications
Linearity	±0.5%	±0.5%	Identical
Response Time	5µs	5µs	Identical
Supply Voltage	±15V	±12V ~ 15V	Compatible - Wider input range
Current Supply (Max)	25mA	25mA	Identical
Operating Temperature	-30°C ~ 80°C	-40°C ~ 105°C	Compatible - Extended range
Mounting Type	Panel Mount	Chassis Mount	Different - Requires mechanical integration review
Package Type	Module	Module, Single Pass Through	Compatible - Enhanced design
Product Status	Obsolete	Active	Substitute is actively manufactured
RoHS Status	RoHS Compliant	RoHS Compliant	Identical - Regulatory compliance maintained

Engineering Selection Recommendations

Primary Substitute: L34S300D15T

The L34S300D15T is the recommended substitute for the obsolete L34S300D15. Selection is based on the following engineering criteria:

Product Status Alignment: The L34S300D15T maintains active manufacturing status, ensuring long-term availability and supply chain continuity. The original L34S300D15 is classified as obsolete, creating procurement risk.
Electrical Specification Preservation: All critical electrical parameters are maintained—300A current sensing, Hall Effect open-loop topology, ratiometric voltage output, bidirectional measurement, and single-channel configuration. These parameters are non-negotiable for functional equivalence.
Performance Enhancement: The substitute offers extended operating temperature range (-40°C to 105°C versus -30°C to 80°C) and wider supply voltage tolerance (±12V to ±15V), providing improved operational flexibility without compromising core specifications.
Regulatory Compliance: Both parts maintain RoHS compliance status, satisfying environmental and regulatory requirements for equivalent component selection.
Mechanical Integration Consideration: The L34S300D15T uses Chassis Mount configuration with single pass-through design, compared to the Panel Mount of the original part. This difference requires mechanical integration review during substitution but does not affect electrical performance or functional compatibility.
Frequency Response Trade-off: The substitute operates at DC to 25kHz versus the original's DC to 50kHz. This reduction is acceptable for applications not requiring measurement above 25kHz. Applications requiring full 50kHz bandwidth must evaluate this parameter against system requirements.

Frequently Asked Questions (FAQ)

Q1: Can L34S300D15T directly replace L34S300D15 in existing designs?

A: Electrical replacement is direct—all critical current sensing, output, and measurement parameters are identical. Mechanical integration requires review due to mounting type change from Panel Mount to Chassis Mount. Circuit-level compatibility is maintained; physical board layout may require modification.

Q2: What is the significance of the frequency range reduction from 50kHz to 25kHz?

A: The L34S300D15T operates at DC to 25kHz, compared to the original's DC to 50kHz. This reduction affects applications measuring current signals above 25kHz. For standard industrial AC/DC current measurement applications operating below 25kHz, this parameter change is not limiting. Applications requiring 50kHz bandwidth must confirm system requirements before substitution.

Q3: Does the supply voltage range difference affect circuit design?

A: The L34S300D15T accepts ±12V to ±15V, while the original requires ±15V. The substitute's wider input range provides improved tolerance to supply voltage variations. Existing circuits designed for ±15V operation remain fully compatible. No circuit redesign is required.

Q4: What is the impact of the extended operating temperature range?

A: The L34S300D15T operates from -40°C to 105°C, compared to the original's -30°C to 80°C. This extended range provides additional operational margin for temperature-sensitive applications. Existing designs operating within the original temperature range experience no adverse effects.

Q5: How does the Chassis Mount configuration differ from Panel Mount?

A: Panel Mount (original) is designed for direct mounting to equipment panels. Chassis Mount (substitute) is designed for internal chassis integration. Both are module-based configurations. Physical mounting location and mechanical integration method differ, but electrical interface and functional performance remain identical. Mechanical integration review is required during substitution.

Q6: Is the single pass-through design feature compatible with existing applications?

A: The single pass-through design is an enhancement that simplifies current measurement by allowing the conductor to pass directly through the sensor. This feature is compatible with existing applications and does not introduce incompatibility. Applications using the original part can adopt this design without functional impact.

Q7: Are there any other substitute options besides L34S300D15T?

A: Based on the provided substitute list, L34S300D15T is the primary active equivalent. Secondary substitutes listed (L34S200D15T) operate at reduced current capacity (200A versus 300A) and are not direct equivalents for 300A applications. Selection of reduced-capacity alternatives requires application-specific current measurement requirements review.

Q8: What compliance certifications are maintained in the substitute?

A: Both L34S300D15 and L34S300D15T maintain RoHS compliance status. ECCN classification (EAR99) and HTSUS code (9030.33.3800) remain applicable. No regulatory compliance gaps exist between the original and substitute parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message