L17HTNCGSOL2RM84C D-Sub 37 Position Receptacle Connector - Equivalent & Substitute Parts

Part Overview

The L17HTNCGSOL2RM84C is a 37 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole solder termination connector features female sockets with mating side female screwlock (M3) and is designed for signal applications requiring robust mechanical and electrical performance. The connector maintains active product status with 1157 pieces in current inventory. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and application-specific requirements where alternative manufacturers or configurations meet functional specifications.

Substiute Parts

L17HTNCGSOL2RM84C

Amphenol ICC (Commercial Products)In Stock: 1231L17HTNCGSOL2RM84C Datasheet

Current PartRFQ

09664516513

HARTINGIn Stock: 101009664516513 Datasheet

SimilarRFQ

09664517513

HARTINGIn Stock: 107309664517513 Datasheet

SimilarRFQ

A-DF 37 PP/Z

Assmann WSW ComponentsIn Stock: 996A-DF 37 PP/Z Datasheet

SimilarRFQ

D37S24A4GV00LF

Amphenol ICC (FCI)In Stock: 1407D37S24A4GV00LF Datasheet

SimilarRFQ

D37S24A4GX00LF

Amphenol ICC (FCI)In Stock: 1575D37S24A4GX00LF Datasheet

SimilarRFQ

D37S24A4PL00LF

Amphenol ICC (FCI)In Stock: 872D37S24A4PL00LF Datasheet

SimilarRFQ

D37S24B4PA00LF

Amphenol ICC (FCI)In Stock: 1180D37S24B4PA00LF Datasheet

SimilarRFQ

DC37S364TLF

Amphenol ICC (FCI)In Stock: 1134DC37S364TLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the L17HTNCGSOL2RM84C is determined by strict alignment with the following core parameters:

Critical Matching Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Type: Signal

Acceptable Variation Parameters:

• Flange Feature: Variations in screwlock type (M3, 4-40) or housing/shell configuration are acceptable provided mechanical mating compatibility is maintained
• Shell Material Finish: Steel with Nickel, Tin, or Tin-Nickel plating are functionally equivalent
• Contact Finish: Gold or equivalent noble metal finishes acceptable
• Current Rating: Substitute parts rated at 5A or higher satisfy the 5A requirement
• Voltage Rating: Substitute parts rated at 300V or higher satisfy the 600V requirement
• Operating Temperature: Substitute parts with -55°C minimum and 125°C or higher maximum are acceptable
• RoHS/REACH Compliance: Active product status with current compliance certifications required

Identified Substitute Parts:

• 09664516513 (HARTING)
• 09664517513 (HARTING)
• A-DF 37 PP/Z (Assmann WSW Components)
• D37S24A4GV00LF (Amphenol ICC FCI)
• D37S24A4GX00LF (Amphenol ICC FCI)
• D37S24A4PL00LF (Amphenol ICC FCI)
• D37S24B4PA00LF (Amphenol ICC FCI)
• DC37S364TLF (Amphenol ICC FCI)

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

The parts D37S24A4GV00LF, D37S24A4GX00LF, D37S24A4PL00LF, and D37S24B4PA00LF from Amphenol ICC FCI Delta D series maintain the closest functional alignment with L17HTNCGSOL2RM84C. All four parts share identical connector configuration (37 position, 2 row, shell size 4), through-hole solder termination, and UL94 V-0 flammability rating. These parts carry ROHS3 or RoHS compliance status with active product status. The primary distinction among these four is flange feature configuration: D37S24A4GV00LF features mating side female screwlock (4-40), D37S24A4GX00LF features housing/shell (4-40), D37S24A4PL00LF features housing/shell (M3), and D37S24B4PA00LF features housing/shell (unthreaded). Selection among these four depends on mechanical mounting requirements and mating interface specifications.

Secondary Substitutes (Acceptable with Application Review):

HARTING parts 09664516513 and 09664517513 provide functional equivalence with 6.5A current rating capability, exceeding the 5A requirement. Both maintain identical connector configuration and UL94 V-0 compliance. The primary difference is packaging: 09664516513 is supplied in tray packaging, while 09664517513 is supplied in bulk packaging. Operating temperature range is -55°C to 125°C, which is acceptable for applications not requiring the extended 150°C upper limit of the primary part.

Limited Substitution:

DC37S364TLF from Amphenol ICC FCI D series meets core connector specifications but lacks specified material flammability rating and contact finish information. This part is suitable only where flammability rating documentation is not required by application standards.

Not Recommended:

A-DF 37 PP/Z from Assmann WSW Components carries a 3A current rating, which is below the 5A requirement of the primary part. Additionally, the operating temperature range (-20°C to 105°C) does not support the full -55°C to 150°C specification. This part is not suitable as a direct substitute.

Frequently Asked Questions (FAQ)

Q: Can I substitute 09664516513 for L17HTNCGSOL2RM84C in a 600V application?

A: The 09664516513 does not specify a voltage rating in the provided data. While the connector configuration is identical, voltage rating compatibility cannot be confirmed. Application of this part in 600V circuits requires independent verification of voltage withstand capability from HARTING technical documentation.

Q: What is the difference between D37S24A4GV00LF and D37S24A4PL00LF?

A: Both parts are functionally equivalent 37 position D-Sub receptacles from the Amphenol ICC FCI Delta D series. The primary difference is the flange feature: D37S24A4GV00LF has mating side female screwlock (4-40), while D37S24A4PL00LF has housing/shell (M3). Selection depends on the mechanical mounting interface of your application. The M3 configuration in D37S24A4PL00LF matches the M3 screwlock of the primary L17HTNCGSOL2RM84C part.

Q: Is A-DF 37 PP/Z a suitable substitute?

A: No. The A-DF 37 PP/Z carries a 3A current rating, which is insufficient for applications requiring 5A per contact. Additionally, the operating temperature range (-20°C to 105°C) does not support the full -55°C to 150°C specification of the primary part. This part does not meet the electrical and thermal requirements.

Q: What packaging options are available for HARTING substitutes?

A: HARTING offers two packaging configurations: 09664516513 is supplied in tray packaging (989 pieces in stock), and 09664517513 is supplied in bulk packaging (1009 pieces in stock). Both parts are functionally identical; packaging selection depends on your procurement and handling requirements.

Q: Do all substitute parts have the same RoHS compliance status?

A: No. The primary part L17HTNCGSOL2RM84C is RoHS Compliant. Most substitute parts carry ROHS3 Compliant status (HARTING and Assmann WSW parts, plus D37S24A4GV00LF and D37S24A4GX00LF). Parts D37S24A4PL00LF, D37S24B4PA00LF, and DC37S364TLF are RoHS Compliant. All parts meet current RoHS requirements; the designation difference reflects the version of the RoHS directive under which compliance was certified.

Q: Can I use D37S24B4PA00LF in place of L17HTNCGSOL2RM84C?

A: Yes. D37S24B4PA00LF is a suitable substitute. It maintains identical connector configuration (37 position, 2 row, shell size 4), through-hole solder termination, and UL94 V-0 flammability rating. The 5A per contact current rating and 300V voltage rating meet or exceed the primary part requirements. The housing/shell (unthreaded) flange feature differs from the M3 screwlock of the primary part; verify that your application does not require the screwlock interface.

Q: What is the temperature limitation of substitute parts compared to the primary part?

A: The primary part L17HTNCGSOL2RM84C operates from -55°C to 150°C. Most substitute parts (HARTING, Assmann WSW, and Amphenol ICC FCI Delta D series) operate from -55°C to 125°C, providing a 25°C reduction in maximum operating temperature. Applications requiring operation above 125°C must use the primary part or confirm alternative part capability through manufacturer documentation.

Q: Are all substitute parts in active product status?

A: Yes. All identified substitute parts maintain active product status with current inventory availability: 09664516513 (989 pcs), 09664517513 (1009 pcs), A-DF 37 PP/Z (968 pcs), D37S24A4GV00LF (1372 pcs), D37S24A4GX00LF (1502 pcs), D37S24A4PL00LF (805 pcs), D37S24B4PA00LF (1098 pcs), and DC37S364TLF (1110 pcs).